Grey Gray Complete Single Din Dash Kit + Pocket Kit + Wire Harness + Antenna Adapter Compatible with Chevrolet & GMC 1988-1996 Select Models
Quick take
This vehicle-specific single-DIN dash kit from Custom Install Parts is built to fill the factory radio opening with an OEM-style look, and it adds a matching pocket storage area. It is best for owners of compatible 1988-1996 Chevrolet and GMC full-size models who want a cleaner center-dash install without cutting factory dash wires, but you should be ready to do the radio side wiring connections (for example, crimping or soldering pigtails) and confirm your antenna setup.
Pros and cons
Pros
- Designed for a single-DIN opening below the A/C vents in supported Chevy and GMC models.
- Includes pocket kit for added storage where the factory radio was removed.
- Color-matched grey trim and an OEM-like appearance are commonly noted by buyers.
- Color-coded wire harness plugs into the aftermarket radio, reducing guesswork on wire matching.
- Antenna adapter is included to adapt the factory antenna connector to a standard Motorola-style male connection.
Cons
- Harness installation may still require basic connector work (crimping or soldering pigtails) depending on your radio wiring setup.
- The antenna adapter may not work if you already upgraded to an aftermarket antenna that does not require adaptation.
- Some buyers report that the pocket/radio overhang can reduce usefulness of factory pull-out cup holders.
- Fit is model-year and configuration specific, so double-check compatibility before ordering.
What buyers think
Buyer-review evidence is generally consistent on the most important install and appearance factors. Many people describe the dash opening and trim fit as precise, with a grey color match that blends with the factory interior. Several reviews also highlight that swapping an older non-working radio was straightforward and completed in a couple of hours, with the install aligning well to factory mounting points. The pocket area is frequently mentioned as clean-looking and genuinely handy for everyday storage. On the electrical side, reviews commonly reinforce that the included harness is helpful and color-coded, but the radio-side connection work still has a small amount of DIY effort (for example, crimping or soldering pigtails). There are also occasional fit-and-function tradeoffs related to cup holder clearance when the new radio overhangs.
What this kit includes and what it’s for
This is a complete “single-DIN in the center” solution for select Chevrolet and GMC vehicles from 1988 to 1996. The bundle combines four pieces: a grey single-DIN dash mounting kit, a pocket kit, a color-coded wire harness for the aftermarket radio connection, and an antenna adapter for matching the factory antenna connector to a common Motorola-style radio input.
Instead of relying on a generic universal opening, the kit is intended to align with factory mounting locations so the install and removal process is easier than improvising with a non-specific bezel.
Compatibility: the part that matters most
Because this kit is vehicle-specific, you should confirm your exact year, model, and cab or trim configuration matches the supported list. It is intended for select Chevrolet and GMC full-size applications, including (as listed) certain Blazer, Suburban, full-size Pickup, Sierra, Yukon, and Kodiak configurations from 1988 to 1996.
If your truck or SUV is not in the supported set, the chances of a clean fit drop quickly, and you may end up needing additional adapters or modifications.
Install and wiring approach (and what to expect)
The main goal of this kit is to make an aftermarket single-DIN radio install cleaner and more “plug-in” friendly. The harness is designed to plug into the back of your aftermarket radio, then you connect into the dash using the included color-coded leads so you are matching like colors rather than decoding individual wires from scratch.
One practical consideration: while the harness helps, reviews indicate that completing the radio connection may require basic connector work such as crimping or soldering pigtails to join the new radio wiring to the harness. If you are not comfortable with that step, you may prefer having a shop handle the final radio wiring.
Antenna adapter caveat
The antenna adapter included in this kit is intended to adapt the factory antenna end to a standard Motorola male end used by many aftermarket radios. If you have already installed an aftermarket antenna that does not require that kind of adaptation, the adapter may be unnecessary or may not be compatible with your current setup. Before you order, it helps to identify what connector is currently on your antenna.
Pros and cons for different buyers
Best for
- Drivers of compatible 1988-1996 Chevrolet or GMC models who want a single-DIN center-dash install that looks closer to OEM.
- DIY installers using a standard aftermarket single-DIN radio and a vehicle-specific harness approach.
- People who want the added pocket storage area in the former radio location.
Not ideal for
- Anyone with an incompatible vehicle configuration (fit is not universal).
- Shoppers who are trying to avoid any wiring-related connector work at all.
- Owners who already upgraded the antenna and do not need (or cannot use) the included antenna adapter.
Verdict
If you have a compatible 1988-1996 Chevrolet or GMC and you are installing a single-DIN aftermarket radio, this kit is an appealing “all-in-one” way to get an OEM-like grey look, built-in pocket storage, and a helpful color-coded harness. The biggest practical caveats are the need for basic wiring connection work and confirming that the antenna adapter matches your current antenna setup. For the right vehicle, it’s the kind of kit that reduces guesswork and keeps the install looking factory.
Price and availability
The kit is typically offered as a budget-friendly bundle with all key components included. Availability can vary, so check the live listing to confirm current price and in-stock status before ordering.
FAQ
Is this a Metra kit?
No. This kit is not a Metra kit.
Will this fit my Chevrolet or GMC?
It is intended for select 1988-1996 Chevrolet and GMC full-size models and specific configurations. Verify your exact year and model match the supported list before buying.
Does it require cutting factory dash wires?
The harness is designed to let you install the aftermarket radio without cutting the factory dash wires. You still need to connect the harness to your aftermarket radio wiring.
Does the wire harness plug directly into the aftermarket radio?
Yes, the harness is designed to plug into the back of the aftermarket radio, then you connect the harness into the dash using the included color-coded wires.
Do I need the antenna adapter?
You may need it if your factory antenna uses a connector that must be adapted to a standard Motorola male end. If you installed an aftermarket antenna that does not require adaptation, the included adapter may not be necessary.
What is the main drawback buyers mention?
A common tradeoff is reduced clearance for factory pull-out cup holders, since the new radio and bezel can overhang those cup holder features.
Specifications
| Product Title | Grey Gray Complete Single Din Dash Kit + Pocket Kit + Wire Harness + Antenna Adapter Compatible with Chevrolet & GMC 1988-1996 Select Models |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Vehicle Electronics Accessories > Car Dash Mounting Kits |
| Brand | Custom Install Parts |
| Manufacturer | Custom Install Parts |
| Model Number | 8542131925 |
| Color | Grey |
| AntennaDescription | Radio |
| UPC | 610098500926 |
| Number of Items | 4 |
| Mfr Part Number | 43237-2 |
| Number of Channels | 1 |
| Antenna | Radio |
| Number of Packs | 1 |
Recommended next
Scosche ICCR6BN Double DIN Radio Installation Dash Kit Compatible with select 2007–2019 Chrysler, Dodge, Jeep and RAM vehicles
The Scosche ICCR6BN is a vehicle-specific double DIN dash kit for select 2007–2019 Chrysler, Dodge, Jeep, and RAM models. It’s designed to help you mount an aftermarket head unit in the factory location with a wiring harness and antenna adapter, minimizing the need to cut factory wires. The main tradeoff: it’s not meant to retain steering wheel controls, and some installs may require light trimming or small bezel adjustments for a perfect look.
Metra Electronics Jeep - 4"x6" Speaker Adapters Fits Jeep Wrangler 1997-2006 (Side Dashboard Location)
Metra Electronics Jeep 4x6 speaker adapters are designed to help install 4x6 speakers in the side dash location of select Jeep Wrangler models (1997-2006). If you are upgrading factory-position speakers, these adapters focus on alignment, “drop-in” convenience, and correct mounting, with the tradeoff that some small trimming to the factory speaker support may be required. Sold as a pair, and a speaker harness is sold separately.
Scosche GM0516DDCS Double DIN Radio Install Dash Kit Compatible with Select 2004-21 GM Vehicles
The Scosche GM0516DDCS is a vehicle-specific double-DIN dash kit and radio interface designed for select 2004 to 2021 GM vehicles. It aims to make an aftermarket stereo install cleaner by pairing with the factory harness and supporting steering wheel control integration, but the fit can depend on your exact vehicle and your head unit’s true double-DIN dimensions.
Scosche ICFD6BN Double DIN Radio Installation Dash Kit Compatible
The Scosche ICFD6BN is a vehicle-specific double DIN dash kit for select 2007-2010 Ford and Mercury models. It aims to help you mount an aftermarket double DIN stereo in the factory radio location with a wiring harness, antenna adapter, and install hardware, keeping the look clean. The main caveat is fitment accuracy, plus steering-wheel control retention is not included.