REFLYING Under Desk Cable Management Tray (No Drill) 15.1\u2032\u2032 Metal Mesh Cable Raceway, Adjustable Tray with Hybrid Side Slots (Black)
Quick take
This metal mesh under-desk cable management tray is built to hold cables and power bricks in a cleaner, more organized way, using hybrid side cutouts and an open-grid base to reduce clutter. Buyers commonly describe it as simple, easy to use for typical home office setups, and good value for the money. The main thing to double-check is whether your desk under-space and cable brick sizes actually match the tray’s clearance and routing openings.
Pros and cons
Pros
- Hybrid side cutouts help route cables for frequent plug-in and unplug needs.
- Industrial-grade metal mesh basket with a steel frame, designed for heavier, daily use.
- Anti-slip silicone pads and rounded edges improve surface protection and hand safety.
- Open-grid base helps keep dust from building up compared to closed boxes.
Cons
- “No drill” may be a mismatch for some buyers since mounting is described as screw-in with included screws.
- Works best when it fits your under-desk layout, and some desk designs may limit how easily it sits or mounts.
- More of a focused cable organizer than a full desk-wide power and cable hub.
What buyers think
Overall buyer feedback is positive but concentrated around basic usefulness: the tray is described as simple and effective for keeping a laptop and desktop setup, including chargers and cable runs, from dangling under the desk. Several buyers mention it can hold a surge strip and bulky power bricks, suggesting it has enough space for common desk accessories, not just thin charging cables. A smaller number of buyers also note value expectations, with one characterizing the build as good for the price if you do not expect premium-level materials.
What it is and how it helps your desk
This under-desk cable raceway is designed as a raised tray, so cables and power accessories can be contained below the desk surface while still being reachable. The hybrid side cutouts are intended to make routing easier, especially if you regularly connect and disconnect chargers or adapters. The open mesh design supports visibility and airflow, and it keeps the tray from turning into a closed “dust collector.”
Key features that matter for everyday use
Hybrid side openings for easier cable access
The tray uses a combination of circular and wedge-shaped cutouts to accommodate different cable thicknesses, from thinner charging leads up to thicker power cords (up to 0.8-inch diameter). The intended benefit is faster access to cables when you need to plug in or adjust connections.
Metal mesh and steel frame for sturdier organization
It’s built with a thickened metal mesh basket and a reinforced steel frame, finished with a powder-coated surface designed to resist scratches and rust. The listed load capacity is 15 lb, which is relevant if you plan to store not just cables but also heavier desk accessories like surge strips or power bricks.
Space-efficient clearance and flexible placement
The tray has 3.5-inch height clearance, which is a practical measurement for whether it can sit under typical desks or shelves. It’s described as adjustable in use, with guidance to orient it vertically for tool storage or horizontally for setups such as monitor stands (use-case flexibility beyond cable-only storage).
Surface protection and safer edges
Silicone pads help prevent scratching on desk surfaces, and rounded edges are intended to reduce the chance of hand discomfort during use. The open-grid base also helps reduce dust buildup.
Installation and fit considerations
Mounting is described as screw-in and includes screws, so if you are shopping specifically for a tray that truly attaches without any drilling or screwing, you should confirm what “no drill” means for your exact setup. Fit will also depend on the structure under your desk. Some desk builds may require you to plan carefully, especially if your under-desk frame, crossbars, or panel thickness limit how the tray can be positioned.
Pros and cons recap
- Best for: people who want under-desk cable and charger organization for a small-to-midsize home office or desktop setup, including routing through side cutouts.
- Who should buy: shoppers who want a metal cable raceway with enough structure to hold power bricks and a surge strip, while keeping cables reachable.
- Who should avoid: buyers who need a truly tool-free mount with zero screws, or anyone whose under-desk clearance is tight enough that the 3.5-inch clearance and mounting layout may not work.
- Main tradeoff: it is an organizer tray, so it will not replace broader cable management solutions like in-desk cable ports, wall raceways, or larger full-length systems.
Is it worth it?
If your goal is to reduce cable mess and keep chargers and power bricks from dangling under the desk, this tray is a straightforward option. Buyers repeatedly describe it as doing the job for typical setups and as good value for the category. It is most likely to satisfy you if you can confirm space under your desk, you are comfortable with screw-in mounting, and you expect a practical cable organizer rather than a premium, showroom-grade build.
FAQs
Will this work for thick power cords?
The tray is designed to handle cables up to 0.8-inch in diameter, with hybrid side cutouts intended to accommodate a range of charger and power-cord sizes.
Does it require drilling?
Mounting is described as screw-in (with included screws). If you are looking for a completely tool-free, no-fastener installation, double-check whether your desk setup allows the intended mounting method without drilling.
How much clearance does it need under a desk?
It has 3.5-inch height clearance, so you will want to verify that your under-desk space matches that measurement.
Can it hold items like a surge strip or power bricks?
Yes, it is designed as more than a thin cable-only basket. Buyers mention using it to manage a surge strip and “clunky” power bricks, and the listed load capacity is 15 lb.
Is the tray safe for desk surfaces?
It includes silicone pads to help prevent scratching and rounded edges to improve hand safety during use.
Is this good for heavy-duty use?
It is built with a reinforced steel frame and powder-coated metal mesh, and it lists a 15 lb load capacity. Still, real-world suitability depends on how you distribute weight and whether your desk mounting points can handle the load.
Specifications
| Product Title | Under Desk Cable Management Tray No Drill 15.1’’, Metal Mesh Cable Management Box with Hybrid Side Slots Cable Raceway,Adjustable Cable Tray with Wire Management for Office Home,1 Pack (Black) |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Cable Raceways |
| Brand | REFLYING |
| Manufacturer | REFLYING |
| Color | Black |
| Material | Alloy Steel |
| Number of Pieces | 1 |
| Unit Count | 1 Count |
| Enclosure Material | Alloy Steel |
| Installation Type | Screw-In |
Available variants
Color
- Black
Recommended next
Delamu 2 Pack Metal Under Desk Cable Management Tray, U Channel Cord Organizer Box
The Delamu 2 Pack under-desk cable trays are a metal U-channel option for tidying power bricks and desk clutter. They come with both tape and screw mounting, plus ties and cord holders, but tape performance depends heavily on surface prep and curing time.
D-Line 157in Cord Cover Kit, Self-Adhesive Wire Hiders, Paintable Cable Raceway to Hide Wires on Wall
The D-Line 157in cord cover kit is a paintable, self-adhesive cable raceway system designed to hide up to 3x 4.5mm (0.18in) outer-diameter cords per channel. It’s geared toward straightforward wall runs like TV-to-outlet setups, with pre-cut style lengths, connector accessories, and an adhesive-first installation that performs best on clean, smooth surfaces.
No-Screw Under Desk Cable Management Tray - Self-Adhesive Installation, Cord Management, Cable Tray, Under Desk Wire Organizer - White Set of 2
A self-adhesive under-desk cable tray set designed to reduce visible cord clutter and keep power bricks and adapters organized. Buyers like the screwless installation and sturdy, solid feel, with the main tradeoff being that repositioning after the adhesive sets requires care and desk-surface prep matters.
Under Desk Cable Management Tray White, Cinati Wire Organizers No Drill, Cable Tray with Clamp
The Cinati under-desk cable management tray uses a clamp-on design (no drilling) to keep power strips and cables off the desk and floor. It’s a solid metal tray with anti-scratch pads, simple setup, and guidance accessories, but buyers should note limited accessibility and tray placement can feel a bit low for some desks.