D-Line 157in Cord Cover Kit, Self-Adhesive Wire Hiders, Paintable Cable Raceway to Hide Wires on Wall
Quick take
This paintable cord cover kit helps clean up visible wall cabling with self-adhesive raceway channels. It works best for straight-ish indoor runs (like a TV down to an outlet) on relatively flat, clean surfaces, and it can handle up to 3 cords with a combined compatible diameter. The main catch: adhesion and paint results depend heavily on surface prep, and textured walls may not hold as well.
Pros and cons
Pros
- Self-adhesive installation, with pre-applied tape on the lengths for peel-and-stick setup.
- Paintable raceway surface, with instructions for sanding and applying two coats to match wall color.
- Designed to accommodate multiple smaller cables (listed fit example: up to 3x 0.18in, 4.5mm outer diameter cords per channel).
- Includes 19 accessories for common layout angles, joins, and end finishing.
Cons
- Adhesion performance depends on wall cleanliness and smoothness, and textured surfaces may hold less securely.
- Paint adherence may vary by wall finish, so it’s wise to test before committing.
What buyers think
Buyer feedback is strongly centered on how clean the finished cable run looks and how straightforward the installation feels. Many people highlight that the adhesive backing works well when the surface is properly prepped, and they like that the raceway is easy to cut down to the exact run length. A recurring theme is that planning the layout before sticking is worth the time, since once it’s attached you want the channel to line up correctly. Buyers also appreciate the included accessories for making corners and joins look more finished. Where limitations show up, it’s mainly around adhesion on certain wall conditions (dirty/dusty areas and textured surfaces) and paint results that may require extra attention to surface prep and priming.
What this cord cover kit is for
The D-Line cord cover kit is aimed at hiding everyday low-voltage and power-adjacent visual cable runs along walls, such as:
- TV setup cabling from the TV area down to a nearby outlet
- Devices in entertainment setups where cords otherwise hang visibly
- Lighting and low-profile applications where you want the run to look intentional
Because it’s a wall raceway with a paintable face, the goal is typically “blend in” rather than “hide with a perfectly matching colored cover out of the box.”
Key specs and fit: will your cables go inside?
Channel size and compatibility
The raceway measures 1.18 inches wide and 0.59 inches tall (with listed capacity example: up to 3x 0.18 inches, or 4.5mm outer diameter cords per channel). If your cables are thicker, unusually shaped, or have bulky connectors that won’t flex into the channel, you may need a different size raceway or a different cable routing approach.
How much length you get
The kit includes 10 lengths at 15.7 inches each, which totals roughly 13.08 feet of channel, plus 19 accessories to manage turns, joins, and ends around “most popular angles.” If your run is longer than that, you may need additional lengths, or you’ll want to plan for splices and shorter segments.
Installation: peel and stick, but prep matters
The system is designed for quick installation using the pre-applied self-adhesive tape on the lengths. However, multiple buyer experiences point to a consistent theme: adhesion is strongly affected by wall condition.
- Clean the surface first: wiping away dust or grime helps the adhesive bond more reliably.
- Dry, flat areas tend to work best: feedback suggests flat drywall holds more securely than textured walls.
- Dry-fit and plan before committing: using tape or staging pieces to confirm alignment can prevent rework, especially on vertical runs.
- Leveling helps for a polished look: once installed, alignment is more noticeable on long, straight segments.
After sticking the raceway in place, you can route the cables into the channel and use the included accessories to finish corners and transitions.
Painting the cord cover to match your wall
One of the most useful features here is that the raceway can be painted. The guidance is to sand with fine sandpaper first, then apply two coats of paint. Buyers also note that paint may not adhere perfectly to every wall or finish type, so it’s smart to test compatibility on a small section before treating the entire run as “ready to paint.” If your wall finish is glossy or unusually textured, primer may be especially helpful, but plan on doing a small test first.
Pros and cons versus common buying criteria
Best for
- Shoppers who want a low-profile, paintable cable raceway for indoor wall runs
- Anyone hiding multiple thinner cables that fit within the stated channel capacity
- DIYers who prefer peel-and-stick installation over drilling or mounting
- People who want the kit to include enough accessories for a cleaner, more complete look around corners and joins
Who should avoid it
- Buyers with very textured walls or surfaces that cannot be cleaned thoroughly, since adhesion may be less reliable
- Shoppers with thick cables, large connectors, or cable bundles that exceed the channel’s capacity
- People who need guaranteed paint matching on difficult wall finishes, since paint adherence can vary and testing is recommended
Verdict: is the D-Line 157in cord cover kit worth it?
This kit is a strong option if your goal is to hide visible wall cords in a tidy, paint-matched way, especially for straightforward runs like TV-to-outlet setups. The included lengths and accessory assortment help the final layout look finished, and the self-adhesive design keeps the installation approachable. The biggest deciding factor is surface condition, so if your wall is clean, reasonably smooth, and you take time to plan the placement, it’s likely to meet expectations.
Price and availability
Check the current price and availability for this D-Line cord cover kit using the button below, since pricing can change.
FAQs
How many cables can this cord cover hold?
The raceway is sized to fit up to 3 cords in the listed compatibility example (up to 3x 0.18 inches, or 4.5mm outer diameter cords). If your cables are thicker or have bulky connectors, they may not fit comfortably.
Is it easy to install on a wall?
It uses self-adhesive tape on the lengths for peel-and-stick installation. Many buyers recommend careful surface prep and planning the layout before pressing it down, especially for long straight runs.
Can you paint the cord cover?
Yes. The raceway is paintable, with guidance to sand the surface with fine sandpaper and apply two coats of paint. Buyers also suggest testing paint on a small area first, since adhesion can vary by wall finish.
Does it stick well to textured walls?
Adhesion is most reliable on clean, flatter surfaces. Feedback indicates textured walls may hold less securely, so you may want to evaluate adhesion carefully or consider a different mounting approach for rough surfaces.
How long is the total cable raceway?
The kit includes 10 lengths of 15.7 inches each, totaling about 13.08 feet, plus accessories for joining and finishing around common angles.
Specifications
| Product Title | D-Line 157in Cord Cover Kit, Self-Adhesive Wire Hiders, Paintable Cable Raceway to Hide Wires on Wall, Electrical Cable Management - 10x 15.7 Lengths & 19 Accessories - 1.18" (W) x 0.59" (H) - White |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Cable Raceways |
| Brand | D-Line |
| Manufacturer | D-Line |
| Model Number | US/3015W-400 |
| Color | White |
| Material | Polyvinyl Chloride |
| Product Dimensions | 15.7"L x 0.59"W |
| Indoor Outdoor Usage | Indoor |
| Number of Pieces | 29 |
| UPC | 818165014370 |
| Unit Count | 13.08 Feet |
| Mfr Part Number | US/3015W-400 |
| Warranty Description | 1 year |
| Enclosure Material | Polyvinyl Chloride |
| Item Dimensions L x W | 15.7"L x 0.59"W |
| Installation Type | Self-Adhesive |
Available variants
Size
- 1.18in (W) x 0.59in (H)
- 0.78in (W) x 0.39in (H)
Color
- White
- Gray
- Black
- Beige
Recommended next
Under Desk Cable Management Tray White, Cinati Wire Organizers No Drill, Cable Tray with Clamp
The Cinati under-desk cable management tray uses a clamp-on design (no drilling) to keep power strips and cables off the desk and floor. It’s a solid metal tray with anti-scratch pads, simple setup, and guidance accessories, but buyers should note limited accessibility and tray placement can feel a bit low for some desks.
EVEO Cable Hider Wall 306”
The EVEO Cable Hider Wall 306” is a slim, paintable wall cord cover designed to conceal and organize TV and entertainment wiring. It’s easy to install with self-adhesive options or screws, but you’ll want to plan placement carefully because strong adhesive can make relocation tricky.
ECHOGEAR TV Cord Hider for Wall Mounted TV (White)
The ECHOGEAR TV cord hider is a DIY cable pass-through kit that lets you route low-voltage A/V cables behind drywall for a cleaner wall-mounted setup. It includes two pass-through grommets, locking brackets, and a hole-saw drill attachment for cutting tidy grommet holes, with a paintable finish to help the openings blend in.
Yecaye 128in Mini Cord Hider for 1 Mini Wire, On-Wall Cord Cover Channel (CMC06)
A simple, tape-on cord cover channel designed to hide one small “mini” cord (up to about 0.23 in diameter). The 128-inch length is a good match for tidy home office or media-area setups, but the adhesive is not ideal for textured walls and removal can be messy if you ever need to take it down.