Radio Stereo Bezel for Dodge Avenger 2008-2014 Dash Installation Mount Trim Kit Fits 9" and Double Din
Quick take
This ABS-plastic dash bezel trim kit is made for a 2008 to 2014 Dodge Avenger dash, with mounting support for a 9-inch and double-DIN radio setup. The main caveat is fitment, since some buyers report it does not match certain Avenger variations, and a separate review notes the plastic can feel thin enough that light modification may be needed.
Pros and cons
Pros
- Designed for Dodge Avenger 2008 to 2014 applications, aiming to replace the factory look
- Built from ABS plastic (a common material for automotive trim replacements)
- Supports radio installations sized for 9-inch and double-DIN head units
- Comes as a single frame component (simple swap for bezel/trim)
Cons
- Fitment may vary by trim or exact vehicle configuration, with at least one report of non-fit for a specific Avenger SE year
- Some reviews suggest the plastic is on the thinner side and may require trimming to fit cleanly
What buyers think
Buyer-review evidence is mixed. One recurring theme is fitment accuracy, with at least one verified purchase stating the bezel does not fit a particular Avenger SE configuration. Positive feedback focuses on value and appearance, including comments that it can fit well and look better than stock when it matches the vehicle. Limited but relevant detail also points to a thinner ABS feel, with one review describing the need to cut a plastic section to get it to fit with a radio.
What this bezel is for
This is a dash-mount radio bezel or trim frame intended to cover and integrate a replacement stereo installation in a Dodge Avenger from 2008 to 2014. If you are upgrading to a compatible 9-inch or double-DIN head unit, the goal is to create a finished, factory-style front appearance around the radio.
Fitment and compatibility you should double-check
The product is marketed for 2008 to 2014 Dodge Avenger vehicles and mentions compatibility with both 9-inch and double-DIN radio setups. However, available buyer feedback includes a non-fit report for a specific Avenger SE year and suggests that fit can depend on the exact dash and trim details.
Before ordering, make sure your vehicle’s exact trim and year match what you are installing into, and confirm your radio dimensions align with the bezel’s support for a 9-inch or double-DIN layout.
Material and build quality (ABS plastic)
The bezel frame is made from ABS plastic with a smooth finish. ABS is widely used for automotive interior trim because it is workable for trim components and holds shape for everyday use. If you prefer rigid, thick-feeling trim pieces, you may want to factor in the chance of minor adjustments for your installation.
9-inch and double-DIN support: what it means in practice
This bezel is intended to work with stereo head units installed for either a 9-inch screen format or a double-DIN format. In practice, that means the bezel framing is designed to accept the face size and mounting approach used by those head unit styles. If you are using a custom radio or a brand/model with non-standard mounting, dry-fitting before final installation is important.
Pros and cons recap
- Best for: Owners of a 2008 to 2014 Dodge Avenger who need a replacement dash bezel/trim frame for a stereo upgrade, and whose radio setup is aligned with 9-inch or double-DIN compatibility.
- Proceed with caution if: Your Avenger trim and year are different from what others have tested, or you want an out-of-the-box fit with no need for any trimming or adjustment.
Price and availability
Current pricing and stock levels can change quickly. Check the latest availability and total cost before you commit, especially if you are coordinating the bezel purchase with the radio installation parts.
Ready to price it out? Buy on Amazon
Verdict
The Radio Stereo Bezel for Dodge Avenger 2008-2014 is a solid option if you are replacing a worn dash trim piece or finishing a stereo swap on a compatible Avenger setup, especially for 9-inch or double-DIN head units. The main risk is fitment variability by vehicle configuration, and some buyers indicate the ABS frame may be thinner than expected, with at least one case requiring trimming for a clean fit. If you can confirm your exact compatibility first, it can be a straightforward way to improve the install’s finished look.
FAQ
Will this bezel fit every 2008 to 2014 Dodge Avenger model?
It is listed for Dodge Avenger 2008 to 2014 vehicles, but buyer feedback includes a non-fit report for a specific Avenger SE configuration. To avoid surprises, verify your exact trim and year, and confirm your radio’s mounting dimensions match the intended 9-inch or double-DIN setup.
Is this bezel for 9-inch radios, double-DIN radios, or both?
The kit is described as fitting both 9-inch and double-DIN radio installations, so it is meant for head units in either of those common sizes or mounting styles.
What is the bezel made of?
It is made from ABS plastic (smooth finish), designed for interior dash trim replacement use.
Does it require trimming or modification to install?
Most installations should be straightforward if your vehicle and radio match the intended compatibility, but one review notes trimming a plastic piece to get proper fit with their radio setup. Planning for a dry-fit can help you determine whether any minor adjustment is needed for your specific configuration.
What should I check before buying to ensure compatibility?
Check your Avenger year and trim (and any dash differences), confirm your radio is sized and mounted as a 9-inch or double-DIN unit, and dry-fit the bezel before final assembly if possible.
Specifications
| Product Title | Radio Stereo Bezel for Dodge Avenger 2008-2014 Dash Installation Mount Trim Kit Fits 9" and Double Din |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Vehicle Electronics Accessories > Installation Services |
| Brand | DKMUS |
| Manufacturer | DKM International |
| Model Number | DO 005N |
| Color | Black |
| Material | ABS plastic |
| Item Weight | 0.15 Kilograms |
| Brand Name | DKMUS |
| UPC | 710436805758 |
| Manufacturer Part Number | DO 005N |
| Manufacturer Warranty Description | 2-years |
| Included Components | frame |
| Item Dimensions | 15.75 x 9.84 x 1.97 inches |
| Unit Count | 1.0 Count |
| Item Depth | 40 centimeters |
| Material Type | ABS plastic |
| Mounting Type | Dash Mount |
| Finish Types | Smooth |
| Item dimensions L x W x H | 15.75 x 9.84 x 1.97 inches |
Recommended next
Sky High Car Audio (10) 1/0 Gauge Copper Ring Terminals
A 10-pack of 1/0 gauge copper ring terminals with heat shrink for clean, secure high-current wiring. Best for car audio and Big 3 style upgrades that use 3/8” mounting holes, with the main caveat that they may be oversized for some 0 gauge or welding cable setups.
Audiopipe 0 Gauge Wire Reducers (PBWR0)
Audiopipe 0 gauge wire reducers (PBWR0) are designed to help clean up a car audio power install, letting you step down big cable to amp-ready lug size. Buyers like the sturdy build and that the reducers clamp securely, but fit can require light material removal depending on the specific amp lugs.
9 Inches + Double Din Radio Dash Trim Kit for Toyota RAV4 2001-2019 Stereo Installation Mount Bezel (2013-2019)
This ABS plastic dash trim kit is designed to help you mount an aftermarket radio in a Toyota RAV4 (2013-2019). It supports setups that use either a 7-inch frame or a 9-inch radio, with the smaller frame option also enabling a double-DIN install. The main caveat is that some buyers report missing mounting hardware or clips, so double-check what’s included before you start.
Sky High Car Audio E-Series Big 3 Upgrade Kit 1/0 & 4 Gauge CCA Power Wire Alternator Battery Ground Wiring Kit (Red/Black)
The Sky High Car Audio E-Series Big 3 Upgrade Kit is a cut-to-fit CCA wiring set designed to replace key alternator-to-battery and ground runs. It’s a straightforward way to clean up electrical connections, with pre-terminated ring terminals and heat-shrink included, but you will need to confirm cable gauge and routing requirements before buying.