9 Inches + Double Din Radio Dash Trim Kit for Toyota RAV4 2001-2019 Stereo Installation Mount Bezel (2013-2019)
Quick take
This dash trim kit by DKMUS is made for installing an aftermarket radio in a Toyota RAV4 from 2013 to 2019. It is built from ABS plastic and is intended to handle both 7-inch and 9-inch radio setups, with the smaller frame configuration also working for double-DIN installs. The most common buying caveat is that some installs may require using hardware or clips you already have, since a few buyers report missing mounting parts.
Pros and cons
Pros
- Designed specifically for RAV4 2013-2019 stereo mounting.
- ABS plastic trim, positioned as a replacement-style bezel.
- Supports both 7-inch and 9-inch radios, including a double-DIN-capable smaller frame setup.
- Fitment feedback from buyers is generally positive (many mention it fits well).
Cons
- Some buyers report it may not include all mounting hardware, clips, screws, or instructions.
- Because trim kits can be configuration-sensitive, you need to confirm your radio size and mounting style before ordering.
What buyers think
Buyer-review evidence is limited but directionally consistent on fitment. Several reviewers describe the kit as fitting well in their RAV4 (including model years like 2015 and 2010), and one called it “perfect” in their vehicle. Where feedback gets more mixed is around what ships in the box. Some buyers reported missing mounting hardware or clips, and at least one mentioned the kit leaving exposed areas near the climate controls that an OEM mount kit had covered. Overall, the reviews suggest the core trim fit is usually good, but it is worth planning for potential “missing pieces” during installation.
Who this dash trim kit is best for
- You’re installing an aftermarket radio in a Toyota RAV4 (2013-2019) and need the bezel/trim to mount it cleanly.
- Your radio plan involves either 7-inch or 9-inch head unit sizing (depending on how you configure the kit).
- You want a double-DIN-capable mounting option using the smaller frame configuration.
Who should avoid it
- You need an OEM-style “all-covered” dash appearance, especially along the climate-control edges, and you cannot tolerate gaps.
- You prefer a plug-and-play box with every screw, clip, and bracket included, since some buyers report missing mounting hardware.
- Your vehicle or dash setup is outside the intended 2013-2019 RAV4 fitment, or you cannot confidently verify radio size and mounting requirements before installing.
Key features that matter during install
Fitment window: RAV4 2013-2019
This kit is intended for the Toyota RAV4 model years 2013 through 2019. If you are outside that range, you should not assume fit without checking compatibility for your specific dash layout.
Radio size support: 7-inch and 9-inch
The kit is described as working with both 7-inch and 9-inch aftermarket radios. It also notes a smaller frame arrangement that can support double-DIN radios, while a larger 9-inch configuration installs directly.
Material: ABS plastic
It is made from ABS plastic and is positioned as a replacement bezel. In practice, this matters because dash trim typically needs to hold its shape and align well around the radio opening.
Pros and cons summary
If your goal is a straightforward bezel solution for a RAV4 2013-2019 stereo swap, this kit appears to be a solid starting point. The primary risk is not the trim material or general fit, it is whether you will receive every installation component you expect, plus how well it matches coverage around nearby dash controls for your specific radio and configuration.
Price and availability
Pricing and stock levels can change frequently. Check the current listing to confirm cost and what is included in the box before you begin your install: Buy on Amazon.
Alternatives to consider
- OEM-style mounting kits made for your exact radio size: If you are sensitive to trim coverage around climate controls, OEM-style mounts for a specific double-DIN or single-DIN sizing may reduce appearance mismatches.
- Universal or aftermarket radio mounting solutions: These can work when you have flexibility in bracket selection, but fitment and bezel alignment may require more custom adaptation.
- Bundles that include full mounting hardware: If missing clips or screws would be a problem, prioritize kits or bundles that explicitly list included brackets, clips, and screws for your vehicle and radio type.
FAQ
Will this dash trim kit fit a Toyota RAV4 from 2013 to 2019?
It is intended for RAV4 model years 2013-2019, which is the safest fitment range to use when planning your install.
Does this kit work with both 7-inch and 9-inch aftermarket radios?
Yes, the kit is positioned as compatible with both 7-inch and 9-inch radio setups, with different configurations for how the radio is mounted.
Can I install a double-DIN radio with this kit?
It supports a double-DIN install using the smaller frame configuration, while the larger configuration is described as installing 9-inch radios directly.
Does it come with mounting hardware and clips?
Review feedback is mixed on included parts. Some buyers report missing mounting hardware, clips, screws, or instructions, so it is smart to verify the box contents or plan to use compatible hardware if needed.
Are there any appearance coverage concerns?
If perfect coverage is a must for you, confirm your exact configuration before purchasing.
How can I avoid compatibility mistakes before ordering?
Match your radio size (7-inch vs 9-inch), double-DIN vs other mounting style, and your exact RAV4 model year (within 2013-2019) to the kit’s intended use, and double-check the included mounting parts you will need.
Specifications
| Product Title | 9 Inches + Double Din Radio Dash Trim Kit for Toyota RAV4 2001-2019 Stereo Installation Mount Bezel (2013-2019) |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Vehicle Electronics Accessories > Installation Services |
| Brand | DKMUS |
| Manufacturer | DKMUS |
| Item Weight | 5.3 ounces |
| Model | for RAV4 Dash Kit |
| Package Dimensions | 8.66 x 7.09 x 1.57 inches |
| Item model number | 2013-2019 |
| Manufacturer Part Number | RAV4 |
Available variants
Model
- 2006-2012
- 2013-2019
- 2001-2005
Recommended next
Sky High Car Audio (10) 1/0 Gauge Copper Ring Terminals
A 10-pack of 1/0 gauge copper ring terminals with heat shrink for clean, secure high-current wiring. Best for car audio and Big 3 style upgrades that use 3/8” mounting holes, with the main caveat that they may be oversized for some 0 gauge or welding cable setups.
Dash Installation Trim Kit for BMW 3 Series M3 E46 One Din Radio Stereo Panel with Wiring Harness Antenna Adapter
This single-DIN dash trim kit is designed for a BMW 3 Series M3 E46 (1998-2006) radio swap and includes a wiring harness and antenna adapter. Reviews suggest it can install cleanly and secure the radio, but antenna fit and overall compatibility with certain aftermarket head units can be hit-or-miss.
(10) 1/0 Gauge Copper Ring Terminals 3/8" Orange Heat Shrink Tubing LUGS
A set of 1/0 gauge copper ring terminals paired with matching heat shrink tubes, built for solid high-current electrical connections. The 3/8" mounting hole fits battery posts, chassis grounds, and distribution blocks, but the larger lug size may require careful washer or stud clearance for some setups.
Audiopipe 0 Gauge Wire Reducers (PBWR0)
Audiopipe 0 gauge wire reducers (PBWR0) are designed to help clean up a car audio power install, letting you step down big cable to amp-ready lug size. Buyers like the sturdy build and that the reducers clamp securely, but fit can require light material removal depending on the specific amp lugs.