(10) 4 Gauge Copper Ring Terminals 3/8" Blue/Black Heat Shrink Tubing Lugs
Quick take
This kit includes 10 copper ring terminals built for 4 gauge wiring, plus heat shrink tubing to help keep connections neat and protected. Buyers tend to describe the terminals as solid and high-quality, but the main caveat is compatibility, you may find them oversized for your specific 4 gauge wire, and crimping requires the correct tool.
Pros and cons
Pros
- 10-pack of 4 gauge copper ring terminals with a 3/8" stud size.
- Includes heat shrink tubing (blue/black) for a cleaner-looking install.
- Buyer feedback highlights strong copper construction and good fit for car audio uses.
- Temperature rating listed at 257°F.
Cons
- You will need a proper crimping tool, these are not “hand-crimp” connectors.
- Some buyers note they may be too large for most 4 ga wire, double-check your cable and ring fit.
- They are ring-style terminals, so they are not ideal if your setup needs different connector types (like spade or butt connectors).
What buyers think
Buyer-review evidence is strongly positive on build quality and connection reliability. Multiple reviews describe the terminals as solid, with thick copper and good contact, and note they worked well for car audio wiring tasks. Several buyers also mention the heat shrink as a convenient addition for finishing the job, with installation described as straightforward once the right crimping setup is available. The most repeated practical caution is fit, some people report these rings may be too large for common 4 gauge wire, so matching your wire size and terminal ID matters.
What these ring terminals are for
These are 4 gauge copper ring terminals intended for terminating wiring to a stud or bolt connection in car audio and similar vehicle electrical projects. The ring style helps keep the connection secure when tightened, which is especially useful for power and ground runs where you want consistent contact.
Key specs that affect compatibility
- Connector type: ring terminal
- Stud size: 3/8"
- Wire size: 4 gauge (the kit is marketed for 4 ga use)
- Material: copper, with copper contact material
- Temperature rating: 257°F
- Included: (10) ring terminals and heat shrink tubing
Installation reality check (what you should plan for)
These terminals require a crimping tool that matches ring terminals and the wire gauge you are using. Reviews specifically call out that you should have a crimping tool on hand before buying. If your current crimp setup is mismatched, you can end up with an unreliable crimp, even with high-quality terminals.
You should also verify physical fit before you commit. The listing note and buyer feedback point to a potential issue where the terminals may be too large for most 4 ga wire. If you have a nonstandard 4 gauge cable type, different strand count, or a wire that measures larger than typical, trial-fitting (and measuring the wire insertion into the barrel) can prevent frustration.
Pros and cons, in plain terms
When they’re a good match
- You are building or upgrading a car audio wiring run that uses 4 gauge power or ground and accepts a 3/8" stud ring.
- You want heat shrink included so you can finish connections with less extra shopping.
- You have, or can borrow, a crimping tool that works with ring terminals.
When you should look elsewhere
- Your equipment or terminal stack uses a different stud size, or you need a different connector style.
- Your “4 gauge” wire tends to run large or behaves differently than typical 4 ga, because these rings may be oversized for some cables.
- You do not have a suitable crimping tool and are aiming for a no-tool or minimal-tool workflow.
Value: are they worth it?
If you already know you need 4 gauge copper ring terminals with a 3/8" stud and you will be using heat shrink, this kit checks the common boxes at a practical quantity of 10. The main value limiter is compatibility. Spend your time confirming that your 4 gauge wire and the ring barrel size match, and that you have the right crimp tool. If those checks pass, buyer feedback suggests you can expect solid contact and a clean, car-audio-appropriate finish.
Price and availability
Pricing and stock can change. For the latest cost and availability for this specific 10-pack, use the link below.
FAQ
What wire gauge are these ring terminals for?
They are intended for 4 gauge wiring.
What is the stud size?
The ring terminal is sized for a 3/8" stud.
Do they include heat shrink tubing?
Yes, the kit includes heat shrink tubing along with the ring terminals.
Do I need a crimping tool?
Yes. Reviews specifically note that a crimping tool is required for these terminals.
Will these fit all 4 gauge wire?
Not necessarily. There is a caution that they may be too large for most 4 ga wire, so it is important to confirm physical fit with your specific cable.
Specifications
| Product Title | (10) 4 Gauge Copper Ring Terminals 3/8" Blue/Black Heat Shrink Tubing Lugs |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Vehicle Electronics Accessories > Installation Services |
| Brand | Sky High Car Audio |
| Manufacturer | Sky High Car Audio |
| Material | Copper |
| Connector Type | Ring |
| Terminal | Ring Terminal |
| Temperature Rating | 257 degree fahrenheit |
| Contact Material | Copper |
| Material Type | Copper |
| Stud Size | 3/8 |
| Brand Name | Sky High Car Audio |
| Model | SHA-4LUG-BLBK |
| Part Number | SHA-4LUG-BLBK |
| UPC | 747150663289 |
Recommended next
Sky High Car Audio (10) 1/0 Gauge Copper Ring Terminals
A 10-pack of 1/0 gauge copper ring terminals with heat shrink for clean, secure high-current wiring. Best for car audio and Big 3 style upgrades that use 3/8” mounting holes, with the main caveat that they may be oversized for some 0 gauge or welding cable setups.
DKMUS Double Din Radio Stereo Adapter for 2001-2007 Toyota Allion 240 Premio DVD Dash Installation Surrounded Trim Kit Fascia
The DKMUS double din radio stereo adapter is a dedicated dashboard trim and fascia kit built to fit 2001 to 2007 Toyota Allion 240 and Premio models. It is designed around a double din head unit layout, uses ABS material, and focuses on achieving a clean, proper fit. The main caveat is that it does not include a wiring harness or other installation accessories, so plan on sourcing those separately.
(10) 4 Gauge Copper Ring Terminals 3/8" Green/Black Heat Shrink Tubing Lugs
These (10) Sky High Car Audio 4 gauge copper ring terminals come with matching heat shrink tubing in green/black. They are built for a 3/8 inch stud and include polyolefin insulation, so they can be a convenient pick for car audio and other 4 AWG wiring runs, with the main caveat that they may be large depending on your exact wire size.
Radio Stereo Bezel for GMC Yukon 2007-2012 Dash Installation Mount Trim Kit (Wooden Color)
This dash trim kit bezel from DKMUS is designed for GMC Yukon models from 2007 to 2012, helping you install a 9-inch or double-DIN radio with a more factory-like look. Buyers report the fit is good and installation is straightforward, with a small learning curve for assembly.