No-Drill Under Desk Cable Management Tray (2-Pack)
Quick take
This 2-pack under-desk cable tray is designed to keep surge power strips, charging adapters, and cords out of sight, with a no-drill setup using 3M VHB tape or the option to mount with screws. It is a strong choice if you want a cleaner look under a standing desk and you care about MacBook charger compatibility (with a large tray option). The main caveat is that adhesive mounting can be hit-or-miss if the surface prep and load expectations are not aligned, so screws may be the safer choice for heavier use.
Pros and cons
Pros
- Two mounting options, adhesive (3M VHB tape) or screws, for more flexibility.
- Carbon steel tray construction with a powder-coated finish for a more durable under-desk setup.
- Comes with cable organization accessories (clips and ties) to help you route and bundle cords.
- Designed to support MacBook charger setups using the larger tray configuration.
- Both tape and screws are rated up to 11 lbs for the tray’s supported load.
Cons
- Adhesive performance can depend on surface preparation and how quickly the tape is put under load.
- Because it is an under-desk tray, it works best when you have appropriate clearance beneath the desk for the tray height and cable bend radius.
What buyers think
Buyer-review evidence points to two recurring themes: the trays help reduce the “wire mess” under the desk, and the hardware is straightforward to install. Several reviews mention that the steel construction feels sturdy and that the trays can hold common desktop cable setups, including power strips and mixed charging cables. Installation is described as quick when using screws, while adhesive mounting is viewed as convenient but sometimes less consistent, with a few buyers reporting one-side tape failure if they did not wait for full bonding or if the load was heavier than expected. Overall, the review pattern suggests the system is most satisfying for people who want a cleaner under-desk look and are willing to choose screws when they want the most reliable hold.
Design and compatibility: what this tray is actually for
This cable management tray set is built for under-desk organization, with the goal of keeping power strips, adapters, and cable runs off the floor and out of view. It is made from carbon steel with a powder coating, which is a practical choice for an area where cables and adapters are routinely plugged in and adjusted.
You also get a size approach that is meant to match common laptop charging setups. The listing highlights a large tray configuration designed for MacBook chargers, while a medium tray option is positioned for situations where extra height is not required. If your charging brick and adapters are chunky or you want a power strip to sit neatly with clearance for cables, tray size selection matters.
Installation: no-drill tape, or screw-in mounting
The biggest decision with this product is how you attach it. You can install it using the included 3M VHB tape (no drilling), or you can use the included screws for a more classic mount.
Why this matters for real use: adhesive mounting is convenient, and the tape is rated for holding up to 11 lbs. However, adhesive setups can be sensitive to prep and timing, because bonding strength develops as the adhesive cures. Review themes reflect that adhesives can perform well, but that a premature load, imperfect surface prep, or heavier-than-planned gear can cause one side to fail.
If you want the most dependable hold for a heavier power strip or adapters, consider choosing the screw option from the start, especially if you are mounting to a surface that is harder to prep (or you are unsure you can get the bonding conditions right).
Cable organization: the included accessories help you finish the job
Trays are only part of the solution, the rest is routing and bundling. This set includes cable clips and cable ties, which are meant to help you secure cable runs and prevent tangles immediately below the desk.
This is especially useful if you routinely plug in multiple devices, because the tray gives you a stable “home base” under the desk, and the clips and ties help you keep everything consistent when cables are added or moved.
Weight capacity and what to plan for
The listing states a supported load of up to 11 lbs, and it applies to both the tape and screw mounting approach. In practice, you will want to think beyond total weight alone, since adapter shapes, how cables hang, and how much leverage they create when you plug in devices can affect stability.
If your setup includes a thicker cluster of power adapters and you expect to frequently connect and disconnect cables, choosing the screw mount can reduce risk compared with relying only on adhesive.
Pros and cons recap
- Best for: people who want under-desk cable raceway-style organization, especially those using power strips and laptop chargers, and shoppers who value a mostly no-drill installation option.
- Choose this if you want: a steel under-desk tray with bundled organization accessories and a tray size option intended for MacBook charger setups.
- Buyer-fit caveat: adhesive mounting is convenient, but to get reliable results you need correct surface prep and you should avoid immediately loading the tray before the adhesive has fully bonded.
- Less ideal if: you need a solution where drilling is not allowed at all, and you cannot ensure proper adhesive bonding conditions (or your desk surface is questionable for tape attachment).
Is it worth it?
The overall case for the No-Drill Under Desk Cable Management Tray (2-Pack) is straightforward: it is a simple steel tray system that helps hide and organize the typical under-desk chaos of power strips, charging adapters, and cables. The package is also positioned to work for MacBook charger setups through the large tray option, and it includes the accessories you need to route cords cleanly.
Where buyers need to be careful is the mount method. If you are planning to load it with heavier adapters or you want the most consistent hold, screw mounting is the safer decision. If your setup is lighter and you can prep surfaces well and allow time for bonding, the no-drill tape option can still be a big convenience.
FAQ
What is the weight capacity of this under desk cable tray?
The tray is rated to hold up to 11 lbs, and that rating applies whether you mount using the included VHB tape or the included screws.
Is this really no-drill to install?
Yes. You can attach the trays using the included 3M VHB tape for a no-drill setup. The product also includes screws if you prefer a more traditional mounted hold.
Will it fit a MacBook charger?
The listing highlights a large tray configuration that is specially designed for MacBook charger setups. If you need more height for your specific charger brick and adapters, selecting the large tray is the key step.
What comes in the 2-pack?
You get 2 trays plus mounting and cable management items, including VHB tapes, cable clips, cable ties, a manual, and assembly hardware.
What should I watch for if I mount with adhesive tape?
Adhesive results depend on surface prep and bonding time. To help the tape perform reliably, make sure the mounting surface is clean and follow the bonding approach suggested for tape installations, then avoid adding full load immediately.
Specifications
| Product Title | No-Drill Under Desk Cable Management Tray - 2-Pack Wire & Cord Organizer - Standing Desk Cable Management - Power Strip Holder - M |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Cable Raceways |
| Brand | COREMINDED |
| Manufacturer | COREMINDED |
| Color | Matte Black |
| Material | Carbon Steel |
| Product Dimensions | 16.54"L x 4.72"W |
| Indoor Outdoor Usage | Indoor |
| Number of Pieces | 2 |
| UPC | 850054661173 |
| Unit Count | 2.0 Count |
| Warranty Description | 1 year manufacturer |
| Enclosure Material | Carbon Steel |
| Item Dimensions L x W | 16.54"L x 4.72"W |
| Installation Type | Self-Adhesive |
| Style Name | Cable Management Tray |
| Style | Cable Management Tray |
Available variants
Size
- Large
- Medium
Recommended next
Under Desk Cable Management Tray No Drill, Metal Mesh Cable review
This no-drill under-desk cable management tray from Litwaro uses a clamp mount and a 2-hole mesh design to keep power strips, adapters, and cable runs off the floor. It’s best for flat-edge desks in the 0.4 to 2 inch thickness range, and the main tradeoff is fit: awkward or non-flat desk edges may limit how securely it clamps.
Yecaye Cord Hider, 113in One-Cord Cable Concealer, Cord Covers for Wires on Wall
The Yecaye Cord Hider is a self-adhesive wall cord cover kit designed to hide a single low-voltage cable (about 113 inches long) for a cleaner, more finished look in home offices and living spaces. Reviewers like the quick peel-and-press install and the tidy result, with the main caveats being up-front layout planning, best adhesion on smooth painted surfaces, and limited fit if you need lots of corners or transitions.
Yecaye Large Cord Hider (47in)
The Yecaye 47-inch Large Cord Hider is a paintable, self-adhesive PVC cable raceway kit designed to clean up wall-mounted TV, studio, and desk setups. It offers wide capacity for multiple cables and a route-friendly approach (splice as needed), but the adhesive install means you should plan your path carefully before committing.
Legrand Wiremold C110S Cordmate 108 Inch 17 Piece Cord Cover Kit, White
The Legrand Wiremold C110S Cordmate kit is a self-adhesive cable raceway system designed to tidy and protect one cord or cable along walls and baseboards. Reviewers consistently describe the adhesive as strong and effective, with a key caveat: you need to place it carefully, because repositioning can damage paint. It’s also easy to custom-fit with cutting, but thicker or less flexible cables may require extra effort during routing.