Legrand Wiremold C110S Cordmate 108 Inch 17 Piece Cord Cover Kit, White
Quick take
The Legrand Wiremold C110S Cordmate is a self-adhesive wall and baseboard cord cover kit that helps conceal and organize a single cord or cable run. It includes multiple straight sections and corner pieces, plus a channel that can be cut for a custom fit. The main buying caveat is installation placement, because the adhesive is described as very strong and can pull paint if you reposition after sticking.
Pros and cons
Pros
- Self-adhesive installation, designed to be quick once positioned correctly.
- Comes as a kit with straight channel sections and multiple fittings (couplings plus inside and outside elbows).
- Channel can be cut to length for custom routing along walls or baseboards.
- Many buyers used it to hide common home entertainment and office cable runs.
Cons
- Strong adhesive means you need accurate placement, since repositioning can damage paint.
- Thicker or stiff cables may require more effort to “zipper” into the channel, and routing may be less flexible.
- Adhesive performance may vary on certain surfaces, and some setups benefited from extra anchoring or tape.
What buyers think
Buyer review evidence points to a consistent theme: the system is effective at making messy cords look neat, and it stays hidden once installed. Several reviewers specifically highlight how well the adhesive works when the channel is pressed down in the right spot, and they report good overall results in real home cable management jobs such as hiding fixture cords and securing TV or speaker-type wiring along baseboards.
At the same time, the same adhesive strength is also the biggest practical drawback. Reviewers warn that if you need to lift and reposition, it can pull paint off the wall or surface. There is also mention that the channel’s opening is stiff, so inserting thicker cables can be tricky and may require planning how the cord exits the outlet (for example, avoiding tight bends right at the faceplate). Finally, a small number of reports suggest that on some surfaces, additional hardware or tape helped keep the track secure.
Who this cord cover kit is for
- Home entertainment and office cable tidying: A good fit for hiding TV/video cabling, speaker cables, and general home office wiring along walls or baseboards.
- People who want a custom-shaped run: The channel can be cut with a utility knife or fine-tooth saw, so you can match your length.
- Buyers comfortable with careful placement: If you can measure and align before pressing, the strong adhesive approach tends to work well.
Key features that matter during shopping
Kit size and included fittings
This kit is intended for longer, multi-piece runs. It includes over 9 feet of wire channel in 7 sections (each about 16 inches long), plus couplings (to connect sections) and corner pieces including one inside elbow and one outside elbow, which helps when you need a turn without building everything from scratch.
Installation style
The CordMate uses pre-attached adhesive backing for installation. That makes it straightforward on suitable surfaces, but it also means your alignment needs to be right the first time. If you’re working with fresh paint or delicate finishes, plan your layout carefully before pressing the channel in place.
Cable capacity and fit
The system is designed to hold a single cord or cable and is commonly described as suitable for typical home wiring runs. That said, reviews indicate the channel’s opening can feel stiff, so inserting larger, thicker, or less flexible cables may require extra patience. If your cord is close to the upper end of what fits, consider routing it into the channel before fully mounting the track when possible.
Pros and cons in real-world use
Pros
- Tidy, hidden cord runs: Multiple buyers used the kit to make cords disappear along baseboards and walls.
- Strong adhesive when placed correctly: Reviewers frequently describe it as very sticky and effective.
- Customizable length: Cutting the channel to match your space helps avoid awkward gaps.
- Fittings reduce DIY complexity: Inside and outside elbow pieces support typical room layouts.
Cons
- Repositioning can be a problem: If you press it down and realize it’s off, you risk pulling paint or damaging the surface.
- Cable routing can be harder with thicker cords: Stiff channels and less flexible cables can make insertion and exit-bend planning more challenging.
- Some installs may need reinforcement: If the surface isn’t ideal for adhesive, extra tape or clamps can help keep it secure.
How to choose the right cable raceway for your setup
- Measure the run length and plan turns. This kit provides multiple channel sections and elbows, but you still want to confirm the total distance and where corners are needed.
- Check your cable size and flexibility. If your cable is bulky, plan how it will slide into the channel and how it will exit near outlets.
- Consider wall surface type. The adhesive approach works best on surfaces that can tolerate strong sticking without paint damage. If you have textured walls or uneven surfaces, you may need additional anchoring.
- Dry-fit your layout. Align the track, confirm direction and outlet clearance, then press down firmly once you are sure.
Verdict
The Legrand Wiremold C110S Cordmate kit is a practical choice for shoppers who want a clean, concealed single-cable run along walls or baseboards, especially for entertainment and office setups. It earns praise for how well it hides cables and how strong the adhesive can be. Just be prepared for careful placement and know that thicker, stiffer cables or challenging surfaces may take extra effort, sometimes beyond adhesive alone.
FAQ
- How long is the Legrand Wiremold C110S Cordmate kit? It includes over 9 feet of wire channel made up of 7 sections, with each section about 16 inches long.
- Is this cord cover kit self-adhesive? Yes, it has pre-attached adhesive backing intended to simplify installation.
- Can I cut the cord cover to fit? Yes. The channel can be cut to length with a utility knife or a fine-tooth saw.
- Will it fit thicker cables? It’s designed to hold one cord or cable, but reviewers note that thicker, less flexible cables may require extra effort to insert into the channel and may need careful routing near the outlet.
- What’s the main downside buyers mention? The adhesive is described as very strong, so you should place the channel exactly where you want it, since repositioning can pull paint off.
Specifications
| Product Title | Legrand Wiremold C110S Cordmate 108 Inch 17 Piece Cord Cover Kit, Organizer for Wall, Holds 1 Cord or Cable, Sustainable Packaging, White (1 Pack) |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Cable Raceways |
| Brand | Wiremold |
| Manufacturer | Legrand Wiremold |
| Color | White |
| Material | Polyvinyl Chloride |
| Product Dimensions | 16"L x 0.52"W |
| Indoor Outdoor Usage | Indoor |
| Number of Pieces | 17 |
| UPC | 086698002960 |
| Unit Count | 1.0 Count |
| Warranty Description | 1 year manufacturer |
| Enclosure Material | Polyvinyl Chloride |
| Item Dimensions L x W | 16"L x 0.52"W |
| Installation Type | Self-Adhesive |
| Style Name | C110 Sortable - 108 Inches |
| Style | C110 Sortable - 108 Inches |
Available variants
Style
- C210 Sortable - 144 Inches
- C110 Sortable - 108 Inches
- C210SBK Sortable - 128 Inches Black
Recommended next
No-Screw Under Desk Cable Management Tray - Self-Adhesive Installation, Cord Management, Cable Tray, Under Desk Wire Organizer - White Set of 2
A self-adhesive under-desk cable tray set designed to reduce visible cord clutter and keep power bricks and adapters organized. Buyers like the screwless installation and sturdy, solid feel, with the main tradeoff being that repositioning after the adhesive sets requires care and desk-surface prep matters.
Delamu Cord Hider, 157in Wire Covers for Cords on Wall
The Delamu Cord Hider (157-inch wall-mounted cable raceway) is designed to conceal 2 to 3 cords in a clean, paintable channel. It installs with an attach-and-snap design and can use adhesive tape or screws, but the adhesive tape is strong enough to risk paint damage if you remove it later.
630in Cord Hider Kit, Paintable Cable Raceway, Cord Covers for Wires on Wall (YesBes)
A long, connector-rich cord hider kit designed to make wall-mounted TV setups look cleaner fast. It uses self-adhesive installation (no drilling), snaps shut to conceal 2 to 4 cords, and can be cut and painted to match your wall.
D-Line Cable Management Box, Power Strip Holder, Floor Outlet Hiders, Desk Cord Organizer, Cover TV Wires, Wire Storage, Extension Hider, Office Concealer for Cords, Baby Proof Cables - Large, Black
The D-Line large cable management box is a freestanding ABS plastic enclosure designed to hide a power strip plus extra cord runs for cleaner TV stands, desks, and other media or office setups. Buyers like the tidy look and cord security, with the main caveat being that it only fits power strips sized appropriately to the box dimensions.