for Crosley/Victrola Record Player Power Cord, DC 5V 1A Power Adapter (TOLPOWDP)
Quick take
This DC power adapter is a replacement cord for select Crosley, Victrola, and WOCKODER record players that require 5V DC at 1A or less. It uses a US standard wall barrel plug and is designed with multiple protection features plus flame-retardant materials. The biggest buying caveat is compatibility, it is only appropriate for devices that match the 5V, 1A requirement.
Pros and cons
Pros
- Targeted compatibility with specific models (Crosley CR8005F/CR8005D, Victrola VSC-550BT, WOCKODER R608)
- Correct output specs for supported devices: DC 5V, 1A
- Includes protection features (short-circuit, over-temperature, and more)
- Designed with engineering PC and flame-retardant materials for heat resistance
Cons
- Not a universal turntable charger, it only fits 5V devices with input current not exceeding 1A
- Some buyers report it does not work for their device, so double-check your turntable’s power rating and connector style
What buyers think
Buyer-review evidence is mixed, with several reports stating the cord works as intended for powering a compatible device. Other feedback includes instances where the cord did not work or was described as not fitting, which reinforces the importance of matching both the power requirements (5V DC, up to 1A) and the connector/power-input type. Overall, the review patterns point to a product that performs well for the right specifications, but buyer satisfaction likely depends heavily on getting the compatibility details correct.
What this power cord is for
This is a DC barrel-style power cord replacement intended for certain record players and related compatible devices that operate on a 5V DC input and draw no more than 1A. It is built as a straightforward substitute for a missing, worn, or damaged power cord, especially if your original adapter is no longer available.
Key specs that determine compatibility
- Output: DC 5V, 1A (5 watts)
- Input (wall): 100 to 240V, 50/60Hz (it is not limited to one regional AC voltage)
- Connector type: DC barrel
- Plug: US standard style wall barrel plug
Compatibility rule to follow: It is intended for devices that are 5V and whose input current does not exceed 1A. If your device requires a different voltage or a higher amperage than stated, this cord will not be the right match.
Pros and cons in real-world use
Why it can be a good fit
- Better odds of correct matching: The cord is explicitly listed for a small set of turntables, which can reduce guesswork when you are replacing a known-power adapter.
- Protection-oriented design: Multiple safety protections are listed (including over-temperature and short-circuit protection), which is useful for everyday use where cords can be bumped or used in typical household conditions.
- Durability materials: Engineering PC and flame-retardant materials are intended to help resist heat and reduce deformation over time.
Where buyers may run into problems
- Voltage and current mismatch: If your turntable’s power rating is not 5V DC at 1A or lower, you should not buy this as a substitute.
- Fit depends on the exact power input: Mixed review outcomes suggest that connector style and device power requirements matter. If you are unsure, verify the output specs printed on your original adapter or on the turntable’s power label.
Who should buy it
This power cord is best for you if:
- You need a replacement charger for a supported model like Crosley CR8005F/CR8005D, Victrola VSC-550BT (including VSC-550BT-BK), or WOCKODER R608.
- Your device requires DC 5V and draws 1A or less.
- You want a cord replacement with protection features and heat-resistant materials, rather than a generic adapter with uncertain specs.
Who should avoid it
You should skip this cord if:
- Your record player requires a different voltage (for example, 9V, 12V, or anything other than 5V).
- Your device’s required current exceeds 1A.
- You are not able to confirm the power-input rating and connector compatibility before purchase.
Alternatives to consider
If this is not the right voltage or connector match, the safer alternative is to find an adapter that matches your device label exactly (same voltage and equal or higher current rating when appropriate, plus the correct connector type). In general AC adapters that are truly “universal” still require you to select the correct voltage and connector, so you will want to prioritize exact electrical matching over flexibility.
Price and availability
The item is listed as in stock for the US market, but pricing can change. If you want the current cost, check the live listing here.
Verdict
For Crosley/Victrola and the listed WOCKODER model, this DC 5V 1A power cord can be a solid replacement choice when your device’s power requirements match its specs. The protection features and flame-retardant construction are good signs for everyday durability, but buyer outcomes hinge on compatibility. If you confirm your turntable needs exactly 5V DC and 1A (or less), this is the kind of replacement cord that can get your record player back in use quickly.
FAQ
Is this power adapter compatible with all record players?
No. It is meant for devices that use DC 5V and where the input current does not exceed 1A. If your turntable requires a different voltage or higher amperage, you need a different adapter.
What output voltage and current does it provide?
It outputs 5V DC with a maximum current of 1A (5 watts).
What connector type does it use?
It uses a DC barrel connector. Make sure your device’s power input matches the connector style.
Does it work with Crosley CR8005F and CR8005D?
It is listed as compatible with Crosley CR8005F and CR8005D, assuming those devices require DC 5V at 1A or less and use a matching DC barrel input.
Is it safe to use for everyday charging?
The cord is described as UL certified and includes multiple protection features such as short-circuit and over-temperature protection. Still, you should only use it for devices that match the 5V, 1A requirement.
Specifications
| Product Title | for Crosley/Victrola Record Player Power Cord, DC 5V 1A Power Adapter for Crosley CR8005F CR8005D, for Victrola VSC-550BT for WOCKODER R608 Portable Turntable Record Player Power Supply Charger Cord |
|---|---|
| Category | Electronics > Power Accessories > AC Adapters |
| Brand | TOLPOWDP |
| Manufacturer | tianze |
| Connector Type | DC |
| Compatible Devices | Compatible with Crosley CR8005F CR8005D, Compatible with Victrola VSC-550BT VSC-550BT-BK, Compatible with WOCKODER R608 Portable Turntable Record Player Power Supply Charger Cord |
| Compatible Phone Models | Compatible with Crosley CR8005F CR8005D, Compatible with Victrola VSC-550BT VSC-550BT-BK, Compatible with WOCKODER R608 Portable Turntable Record Player Power Supply Charger Cord |
| Additional Features | Short Circuit Protection |
| Input Voltage | 110 Volts |
| Amperage | 1 Amps |
| Wattage | 5 watts |
| Output Current | 1 Amps |
| Output Voltage | 5 Volts |
| Power Source | Corded Electric |
| Current Rating | 1 Amps |
| Portable | No |
| Power Plug | Type A - 2 pin (North American) |
| Current | DC |
| Compatible Power Plug Type | Type B - 3 pin (North American) |
| Wired Charging Connector Type | USB Type A |
| Plug Type | Type A - US style |
| Connectivity Technology | DC Barrel |
| Warranty Description | 18 months |
| Number of Items | 1 |
| Unit Count | 1.0 Count |
| Special Feature | Short Circuit Protection |
Recommended next
![[UL Listed] Maxson 15V 2A Power Supply Charger (Input AC 100V-240V, Output DC 15 Volt 2 Amp 30 Watt) Adapter](/product-images/019ed146-e4f7-7dde-a228-b506d9e966f1-0-a7abe2856059.webp)
[UL Listed] Maxson 15V 2A Power Supply Charger (Input AC 100V-240V, Output DC 15 Volt 2 Amp 30 Watt) Adapter
The MAXSON 15V 2A switching power supply charger is a universal AC adapter meant for devices that need 15V DC up to 2A (30W). It supports both common barrel plug sizes (5.5mm x 2.1mm and 5.5mm x 2.5mm), includes a long 6ft US power cord, and adds protections like overload cut-off and short-circuit protection.
ZOVEEK AC/DC Adapter Original Charger for Segway Ninebot (42V 1.7A)
This 42V, 1.7A (up to 71W max) AC/DC adapter is made for specific Segway-Ninebot E, ES, F, and MAX models that use a 1-pin connector. It includes multiple safety protections and is designed to run warm during charging, but it will not fit every variant, and there are a few reports of zero charging on incompatible units.
AMS 2 pro Switching Adapter 24V Power Adapter for Bambu
The AMS 2 Pro switching adapter is a 24V, 4A power supply designed for the Bambu Lab AMS 2 Pro, intended to run filament drying while printing. It is built with multiple protection features and reviewed by buyers as a reliable, low-noise replacement at a value-focused price point, with the key caveat being compatibility with the exact AMS/adapter model you have.
ALITOVE 12V Power Supply 2A Universal AC Adapter (100-240V)
The ALITOVE 12V 2A universal AC adapter is designed for 12V devices, with a long 6.2 ft cable and 14 included DC tips to fit many common barrel-style power jacks. It includes multiple protection features and supports worldwide AC input (100-240V). The main buying caveat is making sure your device truly needs 12V and no more than 2A (or the equivalent wattage).