ZOVEEK AC/DC Adapter Original Charger for Segway Ninebot (42V 1.7A)
Quick take
The ZOVEEK 42V 1.7A AC/DC adapter is a replacement-style charger intended for a range of Segway-Ninebot E, ES, F, and MAX models that use a 1-pin connector. It brings standard safety protections and is expected to run warm during charging, but getting the right model and connector matters a lot, since some buyers report it will not charge certain E3 Pro setups.
Pros and cons
Pros
- Designed for specific Segway-Ninebot models (check the provided compatibility list).
- 42V output (1.7A), with up to 71W max, plus multiple safety protections.
- Built-in EMI suppression module to help reduce electromagnetic interference.
- Includes a charging indicator feature.
Cons
- Compatibility can be strict, with limited review evidence for broad fit across all variants.
- May feel warm during extended charging, which is normal but can be concerning if you are used to cooler chargers.
What buyers think
Buyer-review evidence is mixed, with most snippets describing normal charging behavior (for compatible models) and a smaller number of reports where the charger did not charge a specific unit. Overall, the reviews support a practical expectation: if your scooter matches the required connector type and 42V charging spec, it is more likely to work as intended. If your scooter variant uses a different charger interface or voltage requirement, you may run into no-charge issues.
Compatibility and key specs that matter
This charger is built around a 1-pin connector and an output of 42V at 1.7A (rated for 71W max). It accepts 100–240V AC at 50/60Hz, so it is suited to common household power ranges in the US as well as elsewhere.
Use the compatibility list as your primary check, especially for how close your scooter model and battery setup are to the listed references. The product also notes it is not compatible with certain related series and variants (including the E2, E2 Plus kids version, E2 Plus II, DLX2 Plus, ZING series, and S series), which is a useful signal that this is not a “universal” charger.
Safety features and charging design
For day-to-day replacement charger confidence, it includes multiple protective circuits: short-circuit, over-voltage, over-temperature, overload, and over-current protections. There is also a note that the adapter may become warm during use, especially after extended charging, and the recommended approach is to place it on a well-ventilated, heat-resistant surface.
The charger also includes a built-in EMI suppression module, which aims to reduce electromagnetic interference, and a charging indicator so you have an at-a-glance signal that charging is in progress.
Pros and cons for different buyers
Best for
- Owners of Segway-Ninebot scooters on the compatibility list who need a direct replacement charger with a 1-pin connector.
- Buyers who want a charger with multiple standard protection features (temperature, voltage, current, and overload).
- Shoppers looking for a charger with an EMI suppression approach and a basic charging indicator.
Who should avoid it
- If your scooter is one of the specifically noted non-compatible lines or uses a different connector style, this may not work.
- If you need a cooler-running charger for peace of mind, be aware that warmth during charging is described as normal for high-power charging.
Verdict: is it worth buying?
The ZOVEEK 42V 1.7A adapter is a sensible replacement option when your Segway-Ninebot model and connector type line up with what the charger is designed for. It pairs the right electrical output with a safety-focused feature set and a charging indicator. The main buying caveat is fit, the review evidence suggests most successes happen with compatible units, while incompatible variants can lead to no charging.
Ready to check the latest availability and price? Buy on Amazon
FAQs
What voltage and current is this Segway Ninebot charger?
It provides 42V output at 1.7A (up to 71W max).
Does it use a 1-pin connector?
Yes, the charger uses a 1-pin connector, so matching your scooter’s charging port is important.
Is this charger compatible with all Segway-Ninebot models?
No. The charger is intended for a specific set of E, ES, F, and MAX models, and it is noted as incompatible with certain related series and variants.
Will the adapter get warm while charging?
It may become warm during use, especially after extended charging, which is described as normal. Use a well-ventilated, heat-resistant surface.
What safety protections are included?
It includes short-circuit, over-voltage, over-temperature, overload, and over-current protection.
Specifications
| Product Title | ZOVEEK AC/DC Adapter Original Charger for Segway Ninebot - 42V 1.7A Power Supply Compatible with E3&E2 Pro G30LP ES2 ES4 ES1L F20 F30 F40 E22 E25 DLX2 Pro, 70W Replacement for 36/42V Lithium Battery |
|---|---|
| Category | Electronics > Power Accessories > AC Adapters |
| Brand | ZOVEEK |
| Manufacturer | Zoveek |
| Connector Type | 1-Pin |
| Compatible Devices | Ninebot |
| Compatible Phone Models | segway E2Pro, E3Pro, DLX2 Pro, ES1, ES2, ES3, ES4, ES1LD, E22, E25, E45, E2Pro, F2, F2Plus, F2Pro, F20A, F25, F30, F30S, F35, F40, F40A, MAX G30L, G30LP, G30P, MAX G2, D18, D28, D38, D40, and Air T15 |
| Additional Features | Charging Indicator |
| Input Voltage | 110 Volts |
| Amperage | 1.7 Amps |
| Wattage | 70 watts |
| Output Current | 1.7 Amps |
| Output Voltage | 24 Volts |
| Power Source | Corded Electric |
| Current Rating | 1.7 Amps |
| Portable | Yes |
| Power Plug | Type A - 2 pin (North American) |
| Current | AC |
| Connectivity Technology | AC Power Cord |
| Built-In Media | 1 adapter, 1 AC power cord |
| Mfr Part Number | GC-5NON-W79G |
| Warranty Description | 1 |
| Number of Items | 1 |
| Unit Count | 1.0 Count |
| EU Spare Part Availability Duration | 1 Years |
| Included Components | 1 adapter, 1 AC power cord |
| Special Feature | Charging Indicator |
Recommended next
![[UL Listed] Maxson 15V 2A Power Supply Charger (Input AC 100V-240V, Output DC 15 Volt 2 Amp 30 Watt) Adapter](/product-images/019ed146-e4f7-7dde-a228-b506d9e966f1-0-a7abe2856059.webp)
[UL Listed] Maxson 15V 2A Power Supply Charger (Input AC 100V-240V, Output DC 15 Volt 2 Amp 30 Watt) Adapter
The MAXSON 15V 2A switching power supply charger is a universal AC adapter meant for devices that need 15V DC up to 2A (30W). It supports both common barrel plug sizes (5.5mm x 2.1mm and 5.5mm x 2.5mm), includes a long 6ft US power cord, and adds protections like overload cut-off and short-circuit protection.
AMS 2 pro Switching Adapter 24V Power Adapter for Bambu
The AMS 2 Pro switching adapter is a 24V, 4A power supply designed for the Bambu Lab AMS 2 Pro, intended to run filament drying while printing. It is built with multiple protection features and reviewed by buyers as a reliable, low-noise replacement at a value-focused price point, with the key caveat being compatibility with the exact AMS/adapter model you have.
for Samsung SoundBar Power Cord 24V 2.5A Power Supply for review
This 24V DC, 2.5A (60W max) power adapter is designed to replace power for a range of Samsung soundbars and related wireless audio models that use a compatible barrel plug. It can also be used for other 24V devices that draw up to 2.5A, but it will not work for soundbars that require different voltage or charging specs, and connector shape matters (straight vs 90-degree).
ALITOVE 5V 2A Power Adapter 10W AC Adapter 100-240V 50-60Hz review
The ALITOVE 5V 2A 10W AC adapter is a fixed-voltage power supply for 5V devices, with a long 6.2 ft cable and 14 interchangeable DC tips to match common barrel and USB-style connectors. It is a practical pick for powering LED strips, CCTV cameras, baby monitors, small routers, and other 5V electronics, with the main caveat being correct voltage and connector size.