AMS 2 pro Switching Adapter 24V Power Adapter for Bambu Lab AMS 2 Pro
Quick take
This 24V switching power adapter is made for the Bambu Lab AMS 2 Pro filament drying setup, using an input of AC 100-240V and delivering 24V output (up to 4A). Buyers report it runs reliably for drying while printing, with a notable “doesn’t get hot” experience and no noticeable adapter noise. The main thing to double-check is compatibility with your exact AMS 2 Pro power requirements and cord model.
Pros and cons
Pros
- Made for AMS 2 Pro use (24V output, 4A stated output current) for drying while printing workflows.
- Includes multiple protection features (voltage, current, temperature, and overload protection) and a fireproof PC shell.
- Reviewed as a dependable replacement that avoids excess heat and adapter noise.
- Buyer feedback highlights value as a lower-cost alternative to branded options.
Cons
- Compatibility is model-specific, so you need to confirm your AMS 2 Pro and cord/power supply match the listed requirements.
- Not a portable adapter setup, since it is corded electric and includes a power cord rather than a compact travel design.
What buyers think
Buyer-review evidence is limited to a small set of recent ratings, but the recurring themes are consistent. Multiple buyers describe the adapter as working as intended, with reliable recognition by the AMS 2 Pro and stable performance for filament drying while printing. Several comments specifically mention that the adapter stays relatively cool compared with other options and that there is no noticeable noise from the adapter itself. Buyers also frame it as a value replacement, stating it behaves similarly to an official unit while costing less. One practical takeaway from the reviews is that independent power for AMS units is helpful for multi-AMS setups or when you want consistent drying during active printing.
Key specs and what they mean for your setup
Power output for AMS drying
The adapter is designed around 24V output with a stated up to 4A output current. For AMS 2 Pro users running drying cycles, the goal is to supply steady power for heating while your printer is actively in use.
Universal AC input, wired use
It accepts AC 100-240V input, which is convenient if you are in the US but also travel between compatible outlets. It is corded electric and includes a power cord, so it is not meant to be a compact, portable solution.
Connector and plug type
The adapter uses a 2-pin connector and is listed with a Type A (North American) power plug for typical US wall outlets.
Safety and build details that matter
This model emphasizes protection and durability. It uses a fireproof PC shell and a pure copper core construction, and it is described as having multiple safeguards including voltage protection, current protection, temperature protection, and overload protection. In real-world buyer feedback, the “stays cooler” experience lines up with the safety and temperature-protection claims, though exact temperature performance can vary by environment and load.
Who this adapter is best for
- Bambu Lab AMS 2 Pro owners who want a dedicated 24V power adapter to support drying while printing.
- Budget-focused buyers looking for a value replacement power supply for the AMS 2 Pro experience.
- Multi-AMS users who prefer powering each AMS unit independently to avoid power constraints during active printing.
Who should avoid it
- Buyers with the wrong AMS model or cord requirements. Since the design is intended for a specific AMS 2 Pro configuration, confirm compatibility before ordering.
- People wanting a portable charging solution. This is a fixed, corded adapter, not a travel-ready power brick.
Pros and cons recap
If your goal is to power AMS 2 Pro for drying while printing, this adapter checks the boxes on the fundamentals, 24V output, US plug type, and an AMS-focused compatibility listing. The strongest buyer-supported benefits are practical reliability, limited/no noise, and cooler operation compared with some alternatives. The main tradeoff is that you must match the adapter to your exact AMS 2 Pro power needs, so take a moment to verify your model and cord/power-supply expectations first.
Price and availability
Price fluctuates with retailer listings. Check the current cost and shipping details before buying, especially if you are comparing it directly to a branded alternative.
FAQ
What AMS models is this 24V adapter compatible with?
It is intended for the Bambu Lab AMS 2 Pro Automatic Material System and is listed with compatibility for the Honor ADS-96HLA-19-1 / 24096E power supply cord configuration. Confirm your AMS 2 Pro power/cord model matches before ordering.
What are the adapter’s input and output ratings?
It accepts AC 100-240V input and provides 24V output with a stated output current of 4A.
Does it get hot or make noise?
Some buyers specifically report that the adapter does not get as hot as other options and that there is no noticeable noise from the adapter itself. Heat and sound can still vary by load and room conditions.
Is this suitable for drying filament while printing?
Buyers describe using it for AMS drying during active printing, and it is positioned as an AMS 2 Pro power supply for that workflow. If drying-while-printing is your goal, this adapter’s 24V AMS-focused power spec is aligned with that use.
Is it a portable adapter?
No. It is corded electric and includes a power cord for typical wall outlet use.
Specifications
| Product Title | AMS 2 pro Switching Adapter 24V Power Adapter for Bambu Lab AMS 2 Pro Automatic Material System Compatible with Bambu Lab AMS ADS-96HLA-19-1 24096E Power Supply Cord Charger |
|---|---|
| Category | Electronics > Power Accessories > AC Adapters |
| Brand | ZJCRLH |
| Manufacturer | ZJCRLH |
| Connector Type | 2-Pin |
| Compatible Devices | for Bambu Lab AMS 2 Pro Automatic Material System Honor ADS-96HLA-19-1 24096E |
| Compatible Phone Models | for Bambu Lab AMS 2 Pro Automatic Material System Honor ADS-96HLA-19-1 24096E |
| Additional Features | charger |
| Input Voltage | 12 Volts |
| Output Current | 4 Amps |
| Output Voltage | 24 |
| Power Source | Corded Electric |
| Portable | No |
| Power Plug | Type A - 2 pin (North American) |
| Current | AC |
| Compatible Power Plug Type | Type A - 2 pin (North American) |
| Built-In Media | power cord |
| Mfr Part Number | FJ-A25B-IBPQ |
| Warranty Description | 1 |
| Number of Items | 1 |
| Unit Count | 1.0 Count |
| Included Components | power cord |
| Special Feature | charger |
Recommended next
![[UL Listed] Maxson 15V 2A Power Supply Charger (Input AC 100V-240V, Output DC 15 Volt 2 Amp 30 Watt) Adapter](/product-images/019ed146-e4f7-7dde-a228-b506d9e966f1-0-a7abe2856059.webp)
[UL Listed] Maxson 15V 2A Power Supply Charger (Input AC 100V-240V, Output DC 15 Volt 2 Amp 30 Watt) Adapter
The MAXSON 15V 2A switching power supply charger is a universal AC adapter meant for devices that need 15V DC up to 2A (30W). It supports both common barrel plug sizes (5.5mm x 2.1mm and 5.5mm x 2.5mm), includes a long 6ft US power cord, and adds protections like overload cut-off and short-circuit protection.
24V 2A DC Power Supply Adapter 24W AC/DC Adapter 100-240V AC to DC 24Volt 2Amp1A Power Adapter converter Transformers with 5.5mm x 2.5mm US Plug
This MTYTOT 24V 2A AC-to-DC adapter is designed for projects and devices that need a steady 24V DC input, such as 24V LED strip lights, some CCTV accessories, routers, and 3D printer-related setups. The main buying caveat is matching your device’s required voltage, current draw (must be 2A or less), and the 5.5mm x 2.5mm barrel connector polarity (center positive).
ALITOVE 12V Power Supply 2A Universal AC Adapter (100-240V)
The ALITOVE 12V 2A universal AC adapter is designed for 12V devices, with a long 6.2 ft cable and 14 included DC tips to fit many common barrel-style power jacks. It includes multiple protection features and supports worldwide AC input (100-240V). The main buying caveat is making sure your device truly needs 12V and no more than 2A (or the equivalent wattage).
13.3V Replacement Charger for Shark VACMOP & Ultra Cyclone Pet Pro Cordless Vacuum, Compatible with Shark VM200 VC200 UM200 UM205 VC205 CH950 CH951 CH955
This 13.3V replacement charger is designed for specific Shark 10.8V Li-ion VACMOP and Ultra Cyclone Pet Pro models, with a 6.5 ft power cord and a blue LED charging indicator. It may work well for the right vacuum model, but a mismatch at the charging port or battery type can result in a charger that powers on without charging.