EYSOFT Privacy Cover Compatible for 13 Pro/iPhone 13 Pro Max with Front Camera Cover (2 Pack)
Quick take
This slider-style camera privacy cover kit is made for iPhone 13 Pro and iPhone 13 Pro Max, aiming to block the front and rear camera lenses while still allowing Face ID to work. Buyers generally find the front cover easier to use and more likely to stay put, while the back cover is the part that more often causes durability or adhesion complaints.
Pros and cons
Pros
- Includes both a front camera cover and a back camera cover for iPhone 13 Pro / 13 Pro Max.
- Designed to not affect normal photography and video, and not block facial recognition.
- Front cover uses a simple slide design that’s reported as easy to open and close.
- Can help reduce lens exposure and add scratch protection for the covered areas.
Cons
- Adhesive/tabs on the back camera cover appear less reliable for some users, with covers reported as falling off over time.
- The plastic is described as thin, so careful handling matters if you remove phone cases often.
- It is not water resistant, so it is best kept dry and cleaned gently.
What buyers think
Buyer-review evidence is mixed, but there is a clear theme: the front camera cover tends to perform better than the back camera cover. Many reports describe the front cover as slim, not obstructive to carrying, and staying attached more consistently. Several reviews also say the slide action works smoothly and is simple to install.
Where the experience diverges is durability. Some reviews mention that the back cover can be more delicate, with failures tied to tabs breaking or adhesive letting go. One review notes the front cover kept coming off eventually, but overall the most recurring reliability complaints are associated with the back cover holding power. Overall, the feedback suggests this is a decent concept for iPhone 13 Pro privacy, with the biggest variable being how securely the rear piece bonds in real use.
What this privacy cover kit does well
If your goal is basic camera privacy for everyday situations, this set is built around two practical ideas. First, it uses a mechanical cover on the lenses, so you are not relying on software settings to prevent casual observation. Second, it is designed to avoid interfering with Face ID, which is a common concern with privacy blockers.
In terms of day-to-day usability, the front cover design is the highlight. Buyers describe it as straightforward to slide open and closed, and not meaningfully disruptive when the phone is in a case or being carried. The set also aims to protect against scratches and wear on the covered camera areas.
Where buyers may run into problems
The biggest potential drawback is long-term staying power on the back camera cover. Multiple reviews point to the rear piece becoming loose, falling off, or breaking components tied to attachment. This doesn’t mean every unit will fail, but it is enough of a pattern that you should plan for careful installation and lower stress during use.
Also consider material tradeoffs. The covers are made from ABS and have a slim profile, which helps with portability and fit, but some buyers also characterize the plastic as thin, making it easier to damage if you are rough with the phone or frequently remove the case.
Finally, since the product is not water resistant, treat it like a delicate accessory. Avoid letting it sit in wet environments or getting it soaked during cleaning.
Compatibility and fit notes (important before you buy)
- Phone models covered: iPhone 13 Pro and iPhone 13 Pro Max (the set includes the correct pieces for this series).
- Face ID: designed so normal facial recognition should still work when installed.
- Camera coverage: the covers are intended to protect the covered lens areas without preventing normal photography and video.
If you have a different iPhone model than the 13 Pro / 13 Pro Max series, this may not fit correctly. Take a minute to verify model compatibility before ordering.
Who it’s best for
- People who want quick, physical camera privacy: especially for the front lens, where reviews most often describe reliable performance.
- iPhone 13 Pro and 13 Pro Max owners who keep the phone in a case: reviews suggest case use can help reduce handling stress.
- Buyers who want “Face ID not blocked” behavior: this kit is designed around that use case.
Who should skip it
- If you need the rear cover to stay on no matter what: the most common issues reported involve the back cover not holding as well.
- If you frequently remove and reinstall your case: thinner plastic and adhesive attachment can be more vulnerable when the phone is handled repeatedly.
- If you want water-ready protection: it is not water resistant.
Prospective alternatives to consider
If you mainly care about durability and want fewer attachment variables, consider privacy solutions that do not rely on adhesive alone, or those that integrate with a phone case (case-mounted camera blockers). If you prioritize low-profile coverage and minimal risk to lens functionality, look for covers specifically designed for your iPhone 13 Pro / 13 Pro Max model so the opening alignment is correct.
Because no specific competing products were provided here, use these comparison points when shopping: rear-cover staying power, Face ID compatibility, and whether the design is adhesive-based vs. case-mounted vs. clip-on.
Verdict
The front camera cover design is the stronger part of this EYSOFT 2-pack, and it matches the everyday “simple privacy” goal while keeping facial recognition in mind. If you are comfortable with careful installation and treating the rear cover as the more delicate component, it can be a practical add-on for iPhone 13 Pro privacy. If you need the back camera piece to stay put long-term with high confidence, you may want to consider a more durable, non-adhesive or case-integrated alternative.
Ready to check current availability? Buy on Amazon.
FAQ
Does this camera privacy cover work with Face ID?
It is designed so facial recognition should still work after installation.
Which iPhones is this compatible with?
It is built for iPhone 13 Pro and iPhone 13 Pro Max.
Will it affect taking photos or recording video?
The covers are designed not to affect normal photography and video.
Is the back camera cover reliable over time?
Reviews suggest the back cover can be less reliable than the front cover, with some buyers reporting it eventually falls off or breaks at attachment points. The staying power can depend on careful alignment and handling.
How should I install it?
Remove the adhesive backing, align the camera opening carefully, then press firmly. Adhesion is expected to fully set after the manufacturer’s recommended bonding time.
Specifications
| Product Title | Privacy Cover Compatible for 13 Pro/iPhone 13 Pro Max with Front Camera Cover,Protect Privacy and Security But Not Affect Facial Recognition（2Pack） |
|---|---|
| Category | Electronics > Computers & Accessories > Laptop Accessories > Camera Privacy Covers |
| Brand | EYSOFT |
| Manufacturer | EYSOFT |
| Model Number | 1 |
| Screen Size | 6.5 |
| Color | Black |
| Material | ABS |
| Compatible Phone Models | Phone 13 Pro Max/Phone 13 Pro |
| Compatible Devices | Phone 13 Pro, Phone 13 Pro Max |
| Water Resistance Level | Not Water Resistant |
| Embellishment Feature | Logo |
| Additional Features | Compatible for 13 Pro/Phone 13 Pro Max |
| Is Autographed | No |
| Compatible Cellular Phone Models | Apple iPhone 13 Pro |
| Pattern | Solid |
| Theme | Privacy |
| Form Factor | Slider |
| Enclosure Material | ABS |
| Finish | Smooth |
| Customer Package Type | Standard |
| Number of Items | 1 |
| Set Name | 2 Pack |
| Mfr Part Number | 1 |
| Built-In Media | Privacy Cover |
| Unit Count | 2.0 Count |
| Item Dimensions | 1.18 x 1.18 x 0.2 inches |
Recommended next
![CloudValley Webcam Cover Slide[2-Pack], 0.023 Inch Ultra-Thin Metal Web Camera cover](/product-images/019ed146-f382-7453-a0b1-e3fda202c51d-0-ecf7fa18f2b4.webp)
CloudValley Webcam Cover Slide[2-Pack], 0.023 Inch Ultra-Thin Metal Web Camera cover
The CloudValley slide webcam privacy cover is a minimalist, ultra-thin metal option designed to physically block laptop and mobile front cameras when you want privacy. Buyers like how discreet it is, how securely it sticks, and that it avoids blocking the device’s indicator light. The main tradeoff is careful handling, since the cover can feel delicate during installation and when opening or closing the shutter.
Webcam Cover Slide, 0.027-Inch Ultra-Thin Metal Camera Cover for MacBook Pro, iMac, Laptop, PC, iPad, iPhone (3-Pack)
A slim, metal sliding webcam cover designed to block laptop, tablet, and phone cameras on demand. The main tradeoff to watch is adhesive reliability and how easy it is to grip the slide, especially on smaller or smooth surfaces.
BLOCKED Webcam/Camera Vinyl Covers | Low-Tack Restickable Webcam Sticker | Multiple Sizes | Black 57-Pack Tabbed (Muted Matte)
These solid black vinyl webcam and camera covers are designed to block your lens with low-tack, restickable adhesive and no sticky residue. With 57 covers across three sizes, they are a practical fit for phones, tablets, laptops, and other webcam-enabled devices, with the main caveat being careful alignment for the best coverage.
Toojcc Webcam Cover Slide, 6-Pack Ultra-Thin Privacy Covers
The Toojcc Webcam Cover Slide is an ultra-thin, slide-to-close privacy cover set (6 pack) designed to block laptop and device front cameras with minimal bulk. Reviewers generally find installation straightforward and the profile unobtrusive, but adhesion and fit can be less reliable on phones/tablets that move around, and careful placement matters on some Apple devices.