Webcam Cover Slide, 0.027-Inch Ultra-Thin Metal Camera Cover for MacBook Pro, iMac, Laptop, PC, iPad, iPhone (3-Pack)

What buyers think

Buyer feedback is mixed, but it clusters around two themes. First, many people report that the cover is easy to slide, stays in place initially, and does the job of blocking the camera when closed. Second, there are also reports that the adhesive and overall hold can be inconsistent, including cases where the cover falls off after continued use and may lift nearby screen protectors in the camera area. There is also enough mention of grip difficulty to be worth considering if you prefer a textured slider you can easily pinch.

Design and fit, what this is built to do

This is a minimalist sliding camera cover made from metal, designed to sit over your device’s webcam or front camera area and slide open when you want to use it. A key selling point is thickness, listed at about 0.027 inches, which is intended to reduce interference when closing and opening laptop lids and to keep the cover from adding noticeable bulk.

How it feels in daily use

For many buyers, the main convenience is straightforward operation: move a finger to slide the cover and open or close the camera on demand. Compared with cheaper plastic covers, metal rigidity is frequently mentioned as a reason the slider is less likely to break off. On the other hand, there are reports that the slider can be very smooth, which may make it slightly tougher to grasp, especially if you do not use a fingernail or you have thicker nail growth.

Adhesive reliability is the biggest decision factor

The cover attaches using adhesive tape. Buyers who had good results describe it as sticking well and staying usable for weeks. However, there is enough negative feedback about covers lifting or falling off that adhesive performance should be treated as a variable, not a guarantee. If you plan to apply it on devices with tight camera cutouts, glossy surfaces, or devices that you frequently open and close, consider taking time to prep the surface for best adhesion and avoid repositioning repeatedly.

Also consider the camera area on your device. One recurring buyer pain point is that the placement can lift a screen protector exactly where the cover sits, which could create extra hassle if you already have a protector installed.

Compatibility, where it tends to fit

It’s marketed for a broad range of devices, including MacBook Pro, MacBook Air, iMac, laptops, Microsoft Surface, iPad, and various smartphones. In practice, compatibility comes down to alignment: the cover needs to sit over the camera module without shifting.

Since the thickness is designed to be low profile, it’s generally a good match for laptops where thick covers can interfere with lid closure. For tablets and phones, you still need a clean, stable camera area and adhesive contact that holds under everyday handling.

Pros and cons, the tradeoff summary

• Best for: People who want a low-profile metal sliding privacy cover, especially if you’ve had issues with thicker covers or plastic sliders breaking.
• Who should buy: Anyone using laptops and mobile devices in shared environments, remote meetings, or situations where you prefer physical control over the camera.
• Who should avoid: Buyers who strongly depend on long-term adhesive stability without any risk of lifting, or those who cannot tolerate any chance of interacting with a screen protector near the camera.
• Main tradeoff: Convenience and rigidity versus adhesive hold consistency and slider grip comfort.

Is it worth it?

It’s worth considering if you want an ultra-thin, metal sliding webcam cover and your priority is ease of opening and closing with a sturdier feel than basic plastic designs. If you’ve had adhesive covers fail before, treat this as a “try with good surface prep” product, and be mindful of device-specific camera placement and any screen protector alignment issues. If you need absolute adhesive confidence for a screen-protector-heavy setup, you may want to compare other webcam cover styles with different attachment methods.

FAQ

Will this interfere with laptop lid closure?

Because it is designed to be extremely thin (around 0.027 inches), it’s intended to avoid interfering with closing and opening laptop lids. Real-world fit still depends on your specific laptop camera area and how flush the cover sits.

How easy is the sliding cover to operate?

Many buyers find it easy to move and quick to open or close when you need camera access. Some users note the slider surface can be very smooth, so it may take a fingernail or extra care to grip comfortably.

Does the adhesive tape hold reliably?

Buyer reports are mixed. Some users describe strong sticking and longer-term use, while others report the cover lifting or falling off after extended use. Surface cleanliness and placement accuracy can affect results.

Will it work on iPad, iPhone, or smartphones?

It is marketed for a wide range of devices, including iPad and compatible smartphones. The practical requirement is that the camera location matches the cover’s placement so it can sit over the camera without shifting.

What’s included in the 3-pack?

You get three metal covers in different colors (black, silver, and pink), plus an installation guide card.

If you want to check current pricing and availability, use the link below.

Buy on Amazon

Recommended next

Camera Privacy Covers $6.99

★★★★★ 4.6/5 54,229 ratings

CloudValley Webcam Cover Slide[2-Pack], 0.023 Inch Ultra-Thin Metal Web Camera cover

The CloudValley slide webcam privacy cover is a minimalist, ultra-thin metal option designed to physically block laptop and mobile front cameras when you want privacy. Buyers like how discreet it is, how securely it sticks, and that it avoids blocking the device’s indicator light. The main tradeoff is careful handling, since the cover can feel delicate during installation and when opening or closing the shutter.

Camera Privacy Covers $4.99

★★★★★ 4.1/5 4,749 ratings

ZUCUCUC Laptop Camera Cover Slide, Phone Camera Cover Slide, 6 Pack Ultra Thin Webcam Cover Slide (Black)

The ZUCUCUC sliding webcam cover set is an ultra-thin way to block laptop and phone cameras when they are not in use. Buyers like how discreet it looks and how easy it is to install, but many mention that the adhesive can lose stickiness over time and that the slide can occasionally pop out on heavily used devices.

Camera Privacy Covers $5.98

★★★★★ 4.3/5 15,313 ratings

Yilador Webcam Cover (3 Pack), 0.03 inch Ultra Thin Laptop Camera Cover Slide for iPhone iPad MacBook Pro Computer iMac Cell Phone PC Accessories Camera Blocker Slider, Great for Privacy - Black

The Yilador webcam cover is a thin, slide-on privacy cover designed to block laptop, phone, and tablet cameras when not in use. It’s popular for quick installation and a low-visibility look, with the main tradeoff being adhesive longevity depending on device use and surface prep.

Camera Privacy Covers $5.99

★★★★★ 4.3/5 18,993 ratings

EYSOFT webcam cover slide compatible for laptop, desktop, PC, MacBook Pro, iMac, Mac mini, iPad Pro, smartphone

A slim, slider-style webcam privacy cover from EYSOFT that sticks to your device and closes over the camera when you are not using it. It is designed to be thin enough to not interfere with closing laptop lids, with a movable cover you can open for video calls. The main tradeoff is that placement and adhesive handling matter, since repositioning can be difficult.