Toojcc Webcam Cover Slide, 6-Pack Ultra-Thin Privacy Covers
Quick take
The Toojcc Webcam Cover Slide set uses an ultra-thin ABS cover that slides to block the front camera, designed to stay out of the way on laptops and other devices. It is generally praised for easy installation and a low-profile look, but adhesion and behavior can be inconsistent on phones/tablets that get moved frequently. If you plan to use it on an iPhone or anything where a sensor might be nearby, placement matters.
Pros and cons
Pros
- Ultra-thin design (about 0.022 inches) aimed at not interfering with closing laptop lids
- Slide-to-close mechanism for quick privacy without covering the camera with a flap
- Simple install process, align with the camera, then press firmly for about 10 seconds
- Comes as a 6-pack black set, useful when you have multiple devices
Cons
- Adhesive performance may be less reliable on mobile devices that move a lot
- Placement can affect how nearby sensors behave on certain Apple phones, so you may need to experiment
- Designed for front cameras, so double-check camera location and shape before sticking
What buyers think
Buyer-review evidence is mostly consistent on three themes: installation is typically easy once the camera alignment is right, the ultra-thin profile feels unobtrusive, and devices that stay put (especially laptops) tend to see better “stays on” results. At the same time, review evidence suggests the adhesive can be less dependable on phones used in motion, and some users report needing to reposition the cover on Apple devices after experiencing unusual behavior during calls. Overall, buyers treat this as a practical, low-bulk privacy add-on, with the main caveat being fit and placement on mobile devices and camera-adjacent sensors.
How the Toojcc slide cover works
This is a physical webcam privacy cover that blocks the front camera when the slider is closed. Instead of a removable cap or a thick flap, the cover is made to be extremely thin (about 0.022 inches) and designed to sit flush, so it is less likely to look bulky or interfere with everyday device use.
Installation and setup, what to expect
Setup is straightforward: clean the surface, peel the adhesive backing, align the cover with your camera, then press firmly for roughly 10 seconds to help the adhesive bond. Because the cover is so small and thin, alignment matters. If you are putting it on a phone or an Apple device where the front camera area may be close to other hardware, plan to place it carefully and be ready to adjust if behavior seems off.
Pros and cons for real-world use
Best for steady devices, especially laptops
Reviewers who use the cover on laptops tend to report that it closes cleanly and stays in place well. The low-profile build is also a common positive because it feels less distracting than thicker privacy covers.
Use caution on phones and anything you move around
Some buyers report that adhesive does not last as well on phones, particularly when the device is constantly in motion. If your phone is frequently moved in and out of cases, rotated, or handled throughout the day, you may need to check the bond occasionally, and you may end up with better results by choosing a more stable mounting spot.
Placement can matter on certain Apple devices
A recurring consideration is proximity to other front-facing hardware. This does not automatically mean it will happen to everyone, but it is a useful reminder: if your device has sensors clustered near the front camera, take extra care with placement.
Compatibility and device fit tips
- Front camera coverage: The cover is intended for front camera areas on devices like laptops and select Apple and other devices with a front-facing camera layout.
- Check lid clearance on laptops: The ultra-thin thickness is meant to avoid affecting how devices close, but camera positioning still matters.
- Test placement on phones: If the cover is near sensors (for example, during call proximity behavior), start with conservative placement and adjust if you notice unexpected behavior.
- Confirm your camera alignment: Because these are tiny slides, a slightly off-center mount can leave part of the lens area less fully blocked.
Value: the 6-pack angle
With a 6-pack, this option can make sense if you have multiple devices that share the same general camera privacy need, such as a laptop plus a phone or multiple family devices. Even if you end up using fewer covers initially, the bundle can reduce the hassle of buying replacements later.
Price and availability
This product is commonly listed on major marketplaces, and pricing can vary by seller and timing. Before you buy, check the latest price and quantity details for the exact 6-pack you want.
Verdict: should you buy this webcam cover slide?
Choose the Toojcc Webcam Cover Slide if you want a compact, slide-to-close privacy cover that is designed to be unobtrusive and easy to install, especially for laptops and devices that stay in roughly the same position. Consider a different approach if you need something extremely reliable for heavily mobile phone use, or if you are unsure about sensor proximity near your camera and would rather avoid experimenting with placement.
FAQ
Will this affect how a laptop closes?
The cover is designed to be ultra-thin (about 0.022 inches), and buyers generally mention it does not feel bulky on laptops, but camera positioning still matters, so align carefully.
Is the adhesive strong enough for phones?
Review evidence suggests adhesion may be more consistent on laptops than on phones that get moved around frequently. If you use it on a phone, expect you may need to check the bond and confirm placement.
Can it cause issues during phone calls on iPhones?
If sensors are near your front camera area, placement can be important.
How do I install it correctly?
Clean the surface, peel the adhesive tape, align the cover with the camera, and press firmly for about 10 seconds to help it bond.
Does it block the front camera when closed?
Yes, it is designed to slide and physically cover/block the front camera lens area when closed, but proper alignment is key for full coverage.
What devices is it compatible with?
It is marketed for front cameras on a range of laptop and Apple devices, including models such as MacBook Pro, MacBook Air, iMac, Mac mini, iPad, and iPhone (plus other devices with a suitable front camera location). Always verify camera placement on your specific model.
Specifications
| Product Title | Webcam Cover Slide, [6 - Pack]Ultra-Thin Web Camera Cover for Laptops, PC,Computer and Apple Devices like MacBook,iMac, iPad and iPhone 6/7/8 Plus.0.022in Thick Web Blocker for Privacy and Security |
|---|---|
| Category | Electronics > Computers & Accessories > Laptop Accessories > Camera Privacy Covers |
| Brand | Toojcc |
| Manufacturer | hhY |
| Model Name | Webcam Cover Slide |
| Model Number | ysg-model-6b |
| Screen Size | 16 Inches |
| Item Weight | 0.35 Ounces |
| Image stabilization | false |
| Zoom | Optical |
| Video Capture Resolution | 720p |
| Color | 6 Pack Black |
| Sensor Type | CMOS |
| Connectivity Technology | USB |
| Features | Easy Installation, Privacy Protection, Strong Adhesive, Ultra-Thin Design, Wide Compatibility Range |
| Water Resistance Level | Not Water Resistant |
| Has Image Stabilization | No |
| Form Factor | notebook |
| Style Name | Minimalist |
| Item Dimensions D x W x H | 0.02"D x 0.02"W x 0.02"H |
| Lens Type | Prime |
| Focus Type | Manual Focus |
| Video Resolution | 720p |
| Video Capture Format | MP4 |
| Shooting Modes | Easy |
| Image Aspect Ratio | 16:9 |
| Supported Image Format | JPEG |
Available variants
Color
- 4 Pack Black 4 Pack White
- 8 Pack black
- 6 Pack Black
- 3Pack White 3Pack Black
Recommended next
![CloudValley Webcam Cover Slide[2-Pack], 0.023 Inch Ultra-Thin Metal Web Camera cover](/product-images/019ed146-f382-7453-a0b1-e3fda202c51d-0-ecf7fa18f2b4.webp)
CloudValley Webcam Cover Slide[2-Pack], 0.023 Inch Ultra-Thin Metal Web Camera cover
The CloudValley slide webcam privacy cover is a minimalist, ultra-thin metal option designed to physically block laptop and mobile front cameras when you want privacy. Buyers like how discreet it is, how securely it sticks, and that it avoids blocking the device’s indicator light. The main tradeoff is careful handling, since the cover can feel delicate during installation and when opening or closing the shutter.
CloudValley Webcam Cover for Logitech C920/ C920x/ C922x/ C930e/ C922/ C920 HD Pro Stream Webcam, Black
The CloudValley webcam cover is a simple flip-style privacy shutter designed specifically for compatible Logitech models like the C920 series. Buyers report a snug fit, easy open and close, and a blank view when closed, with limited setup. The main consideration is compatibility, since it is made for specific Logitech webcam shapes.
Eyebloc Webcam Covers - Residue-Free Camera Blocker Sticker (Pack of 7, Camo)
Eyebloc Webcam Covers are reusable camera privacy covers designed to block your laptop or phone camera when you are not using it. The residue-free, removable design and “nano suction cup” style attachment can make them easier to swap on and off than tape-style options, but they can be easier to lose in pockets and may need cleaning to stay grippy.
BLOCKED Original Vinyl Webcam Cover Stickers
BLOCKED Original Vinyl Webcam Cover Stickers are thin, solid-color vinyl privacy covers designed to block webcams and selfie cameras on a wide range of devices. They come in 3 sizes (57 total) and are positioned as restickable with low-tack adhesion, plus water-resistant protection for everyday use.