Extended Carplay Mount, 360° Flexible Windshield Dashboard Suction Cup Bracket
Quick take
This extended CarPlay suction mount from Epronic is built to replace a screen bracket and help you position a compatible display precisely, thanks to a 17 mm swivel ball connection and 360° aiming. It’s a good fit if you want windshield or dashboard mounting and you value a strong suction hold. The main caveat is that the suction cup may not adhere well to leather, vinyl, or soft dashboard surfaces, so windshield placement is often the safer bet.
Pros and cons
Pros
- Strong suction hold, with multiple buyers noting it grips firmly to the windshield and stays put over bumpy roads.
- Flexible viewing, with telescopic arm length (about 3.94 in to 6.49 in) and up to 360° rotation for angle adjustment.
- Designed as a bracket replacement for compatible CarPlay screen units, GPS monitors, and similar setups that use a 17 mm swivel ball socket.
Cons
- Compatibility is specific: it won’t work with 22 mm or 25 mm ball sockets, so you need to confirm your device’s mounting pattern.
- Surface matters for suction: not recommended for leather, vinyl, or soft-style surfaces, which may reduce adhesion.
- Limited buyer evidence on long-term extremes: review detail focuses on normal driving and setup, so results may vary with very rugged conditions.
What buyers think
Buyer-review evidence is limited but consistent on a few decision-critical points. Reviews repeatedly highlight firm suction and stable holding, including cases where the mount was used to replace a broken CarPlay bracket. Setup is commonly described as straightforward, and the 360° swivel is mentioned as useful for angling the display for maps, music, and general visibility. There is also a recurring practical caveat tied to the mounting surface, where windshield mounting is preferred when dashboards are leather or similar materials.
What this mount is, and what it’s for
This is an extended CarPlay screen mount that uses a windshield or dashboard suction cup base plus a telescopic arm. The arm connects to a standard 17 mm swivel ball mount pattern, making it intended for compatible CarPlay screen units and other monitors that share that ball socket size.
Key compatibility check (so you don’t waste time)
Before buying, confirm your device uses a 17 mm car mount ball connection. This mount is meant for screens and accessories that use a 17 mm swivel ball mounting pattern, and it is not compatible with 22 mm or 25 mm ball sockets.
Adjustability and viewing angles
The telescopic arm length adjusts from about 3.94 in to 6.49 in, which can help bring your screen closer or farther away based on your dashboard and windshield shape. The mount also supports wide aiming, with rotation up to 360° so you can fine-tune the display angle for less glare and better readability.
Suction cup performance, and the surface limitation
The base is an industrial-strength suction cup with sticky gel, designed to stay attached during driving, including bumpy roads. That said, the suction cup may not be compatible with leather, vinyl, and soft-style surfaces. If your interior includes these materials, you’ll likely get a stronger hold by mounting it on the windshield rather than the dashboard.
Installation and day-to-day usability
Setup is geared toward quick mounting, with buyers describing it as simple to attach and position. If the suction cup loses adhesion over time, it can be restored by rinsing under running water and air drying.
Pros and cons at a glance
Choose it if: you need a replacement suction mount for a compatible CarPlay or monitor setup that uses a 17 mm ball socket, and you want an extended arm plus a wide swivel for better screen placement.
Avoid it or consider windshield-first if: your dashboard is leather, vinyl, or soft, or if your device uses a 22 mm or 25 mm ball socket connection.
Verdict
The Extended Carplay Mount is a practical, replacement-style windshield/dashboard suction bracket with strong adjustability and a 17 mm connection that should fit many compatible CarPlay screen setups. If you match the mounting socket size and plan to mount on glass when your dashboard surface is leather or vinyl, it looks like a solid value option for getting your screen securely positioned.
FAQ
- What size ball connection does this mount use? It is designed for a 17 mm swivel ball mounting pattern, and it is not compatible with 22 mm or 25 mm ball sockets.
- Can I mount it on my dashboard? Yes, it supports windshield or dashboard mounting, but the suction cup may not adhere well to leather, vinyl, or soft-style dashboard surfaces. Windshield mounting is recommended for stronger hold in those cases.
- Does it allow the screen to be angled? Yes. The mount supports wide rotation (up to 360°) so you can set a comfortable viewing angle.
- How long is the arm? The telescopic arm adjusts from about 3.94 in to 6.49 in, for flexibility in screen placement.
- How do I restore suction if it weakens? Rinse the suction cup under running water and let it air dry to restore condition.
Specifications
| Product Title | Extended Carplay Mount, 360° Flexible Windshield Dashboard Suction Cup Bracket Replacemect for 7" 9" 10.26" Inch Carplay Screen Android Auto Mount Car Baby Camera Monitor Phone Holder |
|---|---|
| Category | Electronics > GPS, Finders & Accessories > GPS System Accessories > Vehicle Mounts |
| Brand | Epronic |
| Manufacturer | Epronic |
| Model Name | 1026-EU0912 |
| Model Number | PSCB-1026-EU0912 |
| Color | Black |
| Item Weight | 85 Grams |
| Compatible Devices | for carplay screen mount/ GPS/ Backup camera/phone holders/ Monitors, ★Note: The suction cup may not compatible with the leather, vinyl and soft style surface. Recommend that to mount it on the windshield for stronger hold if your car's dashboard surface is leather or vinyl or soft |
| Compatible Phone Models | ALL |
| Mounting Type | Dashboard |
| Additional Features | Adjustable / Adhesion |
| Weight Capacity Maximum | 5 Kilograms |
| Compatible with Vehicle Type | Automobile |
| Item Dimensions | 3.9 x 3.5 x 2.6 inches |
| Arm Length | 6.49 Inches |
| Enclosure Material | Acrylonitrile Butadiene Styrene |
| Mfr Part Number | PDB-1026-EP0912 |
| Warranty Description | 2 years labor and parts |
| Built-In Media | 1* Car play mount |
| Item Type Name | Bracket |
Available variants
Size
- Holes Bracket
- Screws Bracket
Recommended next
Garmin 010-10908-02 Portable Friction Mount
The Garmin 010-10908-02 is a portable dash friction mount designed to hold compatible Garmin nüvi and StreetPilot devices securely on stable surfaces. It focuses on quick in-and-out mounting, adjustable viewing angles, and a grip-on-dash approach that avoids common windshield suction issues.
95mm Adhesive Dashboard Pad Mounting Disk with Adhesive for Suction (2-Pack)
This 95mm adhesive dashboard mounting pad lets you turn a suction-cup phone or Garmin mount into a more stable dashboard setup. It’s designed to work with textured or less-flat dash surfaces by creating a smooth, even landing area for suction, but the adhesive disks are intended for one-time use once removed.
![1Zero GPS Suction Cup Mount for Garmin [Quick Extension Arm]](/product-images/019ed146-f5f5-7de5-ad16-6b0f3bccdcc1-0-103950937647.webp)
1Zero GPS Suction Cup Mount for Garmin [Quick Extension Arm]
The 1Zero GPS suction cup mount with a quick-extension arm is designed to replace a Garmin dashboard or windshield ball-style mount using a 17 mm swivel ball pattern. It focuses on one-hand length adjustment, a 240-degree pivot, and a gel-based adhesive suction for steadier positioning, with the main catch being compatibility limits (it is not for several specific Garmin models) and the fact that it’s mount-only (no cradle or socket parts).
SoeKoa Garmin Accessories GPS Bracket Cradle Mount (2 Pack)
A lightweight 2-pack cradle mount replacement for select Garmin Nuvi models, designed to snap onto the GPS and work with a cup-holder style holder. Best for buyers who want an OEM-like fit for a compatible Nuvi and a backup mount for daily switching, with the main caveat that compatibility is model-specific.