Double Din Radio Dash Installation Mount Trim Kit Compatible with Honda CR-V CRV 2007-2011
Quick take
This double-DIN dash installation mount trim kit is designed to help fit an aftermarket radio into a 2007 to 2011 Honda CR-V, specifically the manual A/C version. The plastic trim is reported to feel sturdy and looks good, but fit can depend on confirming your CR-V’s configuration (especially A/C style) and your radio’s dimensions.
Pros and cons
Pros
- Designed for 2007-2011 Honda CR-V models
- Includes a dash kit plus an A/C cover for manual A/C only
- Built from ABS plastic, with buyers describing it as hard/sturdy
- Works with either 7 inch or 6.2 inch double-DIN radio sizes
Cons
- Manual A/C cover included, so it may not suit automatic A/C setups
- Fit issues can happen if your measurements or trim variant differ from what you expect
- Limited review volume means buyer evidence is not fully conclusive
What buyers think
Buyer-review evidence is limited (13 ratings), but the recurring themes are practical and useful. Several buyers report positive experiences with build feel and fit, describing the plastic as hard/sturdy and the installation fit as good. Others emphasize the importance of double-checking measurements and installation requirements, including one mismatch complaint even when the vehicle year matched. There is also limited evidence of occasional damage on arrival, so it is smart to inspect the kit immediately when it arrives.
What this kit is for
This is a vehicle-specific dash trim and installation mount kit meant to support a double-DIN stereo in a 2007 to 2011 Honda CR-V. It pairs the main dash bezel/trim piece with an A/C cover that is meant for manual A/C dashboards. If you are swapping the factory head unit for an aftermarket double-DIN model, this kit helps you recreate a clean, finished look around the radio opening.
Compatibility details to verify before you buy
- Vehicle fitment: 2007, 2008, 2009, 2010, or 2011 Honda CR-V.
- A/C configuration: manual A/C only (the kit includes 1 A/C cover for manual A/C).
- Radio size flexibility: claims compatibility for both 7 inch and 6.2 inch double-DIN radios.
Important: even when the vehicle year matches, differences in dash trim and installation requirements can affect how well a kit aligns. Before committing to the install, compare your aftermarket radio’s dimensions and plan the installation route, including how the bezel and A/C cover will sit in your specific CR-V dashboard.
Build quality and materials
The kit is made from ABS plastic. Buyers who were happy with the kit specifically mention the plastic’s hardness and a solid feel, which matters for dash trim pieces that need to hold shape during installation. The overall impression from the available comments is that it looks appropriate and feels substantial, rather than flimsy.
Installation fit and real-world expectations
Because this is a trim kit, “fit” is the main story. Positive feedback centers on the kit fitting correctly and looking good, but there is also at least one report indicating a mismatch. That mismatch kind of issue is usually avoidable with pre-install checks, such as measuring the radio opening you are working with and verifying you have the correct A/C variant.
Pros and cons, in plain language
Best for
- Owners of a 2007-2011 Honda CR-V with manual A/C who want a double-DIN radio fitment
- Shoppers matching an aftermarket head unit that is intended for 7 inch or 6.2 inch double-DIN setups
- Buyers who prefer an ABS plastic bezel that feels firm and looks finished
Who should avoid it
- CR-V drivers with automatic A/C (this kit is listed for manual A/C, and it includes only the manual A/C cover)
- Anyone who is not able to verify measurements and dash variant details before installation
Is it worth it?
If you have the correct CR-V year and you are running an aftermarket double-DIN radio that matches the listed size range, this kit can be a straightforward way to get the dash bezel and manual A/C cover to look intentional. The main reason it might be frustrating is compatibility nuance: confirming manual A/C and confirming measurements upfront are the two highest-impact steps to reduce the chance of a mismatch.
Alternatives to consider
No specific competing product is named here, so the best “alternative” depends on your priority:
- If A/C configuration is your concern: search specifically for a dash kit variant that matches your CR-V’s A/C type (manual vs automatic) to avoid cover misalignment.
- If your radio size is unusual: confirm whether your head unit is closer to 6.2 inch or 7 inch in the double-DIN category, then choose a kit built for that size.
- If you want the cleanest install outcome: consider having a local installer handle alignment and trim fit checks, especially if your dashboard has any aftermarket modifications already.
FAQ
What Honda CR-V years does this dash kit fit?
It is listed to fit Honda CR-V models from 2007 to 2011.
Is this kit for manual A/C or automatic A/C?
This kit is for the manual A/C version and includes an A/C cover meant for manual controls.
Will it work with both 7 inch and 6.2 inch double-DIN radios?
It is listed as compatible with both 7 inch and 6.2 inch radio sizes.
How can I avoid a fitment problem?
Double-check your CR-V’s A/C configuration (manual vs automatic), verify your aftermarket radio’s dimensions for the double-DIN opening, and plan the install so the bezel and A/C cover can align properly with your dash trim variant.
What do buyers usually like or dislike?
Buyers with positive experiences tend to mention sturdier-feeling ABS plastic and a good fit. The main negative theme is limited evidence around mismatches when measurements or requirements do not align, so pre-install checking is important.
Specifications
| Product Title | Double Din Radio Dash Installation Mount Trim Kit Compatible with Honda CR-V CRV 2007-2011 Stereo Bezel with Manual Version A/C Air Conditioning Replacement Panel |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Vehicle Electronics Accessories > Installation Services |
| Manufacturer | DKM International |
| Item Weight | 4.8 ounces |
| Product Dimensions | 9.84 x 5.91 x 1.57 inches |
| Item model number | HO 019 |
| Other display features | Wireless |
| Whats in the box | ABS plastic |
Recommended next
Sky High Car Audio (10) 1/0 Gauge Copper Ring Terminals
A 10-pack of 1/0 gauge copper ring terminals with heat shrink for clean, secure high-current wiring. Best for car audio and Big 3 style upgrades that use 3/8” mounting holes, with the main caveat that they may be oversized for some 0 gauge or welding cable setups.
Dash Installation Trim Kit for BMW 3 Series M3 E46 One Din Radio Stereo Panel with Wiring Harness Antenna Adapter
This single-DIN dash trim kit is designed for a BMW 3 Series M3 E46 (1998-2006) radio swap and includes a wiring harness and antenna adapter. Reviews suggest it can install cleanly and secure the radio, but antenna fit and overall compatibility with certain aftermarket head units can be hit-or-miss.
Radio Stereo Bezel for Dodge Avenger 2008-2014 Dash Installation Mount Trim Kit Fits 9" and Double Din
This dash bezel trim kit is designed to replace the factory look on a 2008 to 2014 Dodge Avenger, with support for 9-inch and double-DIN radio setups. It uses ABS plastic and a dash-mount frame, but fitment can vary by trim (some owners report it does not work for certain Avenger SE models), and the plastic may feel thin.
(10) 4 Gauge Copper Ring Terminals 3/8" Red/Black Heat Shrink Tubing Lugs
A compact 10-pack of 4 gauge copper ring terminals with 3/8-inch stud size and heat shrink insulation, designed for cleaner, more secure wire terminations in car audio and vehicle installs. Strong buyer feedback centers on quality and how well they complete connections, with the main caveat being sizing.