Double Din Dash Radio Trim Kit for Dodge Ram 1500 2500 5500 2013-2019 Installation Bezel 9 Inches (Ram 1500/2500)
Quick take
This double-DIN dash radio trim kit from DKMUS is built for Dodge Ram 1500/2500 models from 2013 to 2019 and is made to blend in with the original dash look using ABS plastic. It supports setups for both 7-inch and 9-inch radios by using a smaller frame for 7-inch installations, or fitting 9-inch radios directly when you do not use the smaller frame.
The main catch is usability fitment. Some buyers report areas that feel very tight, which can make certain knobs harder to turn, and a few mention limitations around dash vent control behavior after installation.
Pros and cons
Pros
- Designed for 2013 to 2019 Dodge Ram 1500 and 2500 fitment.
- ABS plastic construction aimed at replacing the factory-style bezel look.
- Supports both 7-inch and 9-inch radio installs (smaller frame used for 7-inch setups).
- Multiple buyers report it “did the job” and fits correctly for their truck.
Cons
- Can feel tight around controls, with some buyers saying knobs do not move as easily.
- Dash function compatibility may be imperfect for certain radios or setups, including vent behavior concerns.
- Limited buyer-review sample size, so matching outcomes can vary by install approach and radio model.
What buyers think
Buyer-review evidence for this trim kit is mixed, but the recurring themes are practical fit and day-to-day usability.
On the downside, some buyers report a very tight fit around the radio and bezel area, which can interfere with knob movement. There are also mentions of dash control limitations after installation, including vent adjustment issues. Because the review evidence is limited in volume, it is best to treat these as “watch-outs” for your specific radio and installation layout rather than guaranteed outcomes.
How the 7-inch vs 9-inch radio setup works
This kit is meant for aftermarket radios in two sizes. The smaller frame can be used when installing a 7-inch double-DIN radio, while the kit can fit a 9-inch radio directly when you do not use the smaller frame. If you are swapping radios, pay attention to your radio face size and layout so you choose the correct framing approach.
Fitment and materials
The trim kit is intended for Dodge Ram 1500 and 2500 models from 2013 to 2019. It is made of ABS plastic, which is commonly chosen for dash bezel parts because it can hold shape, resist typical wear, and provide a replacement appearance that matches the factory look.
Pros for which this kit is a solid choice
- You have a 2013 to 2019 Ram 1500 or 2500 and need a bezel solution for a double-DIN radio installation.
- You’re installing an aftermarket radio in either 7-inch or 9-inch format and want one trim kit approach that can adapt between those sizes.
- You want an ABS plastic bezel-style replacement for a cleaner dash finish rather than leaving the radio frame exposed.
Where buyers should be cautious
- If your radio uses physical knobs/buttons near the bezel edges, plan to verify clearance after installation. Some buyers report tightness that makes knob operation less smooth.
- If you depend on dash vent behavior after the swap, be aware that some installs can affect how vents function or how controls feel once everything is assembled.
- If your setup includes additional camera or vehicle integration, compatibility can come down to how your chosen radio and vehicle connections are designed. A mismatched integration can turn a cosmetically correct bezel into a frustrating overall install.
Installation and compatibility tips (so it fits the way you expect)
- Confirm the radio size first (7-inch vs 9-inch) and choose whether to use the smaller frame accordingly.
- Before fully locking everything in place, test that knobs move freely and that buttons and display edges do not sit under pressure.
- Check dash control clearance around vents and surrounding trim once the radio is seated, especially if your radio’s mounting depth is different from the factory unit.
- Test all connected features after final assembly (camera inputs, steering wheel controls, and other vehicle integrations tied to your radio model).
Price and availability
Pricing for this trim kit can be budget-friendly compared with many larger installation kits, and current availability may be limited at times. If you see low stock, consider ordering promptly if you have already confirmed your radio size and vehicle fitment needs.
Verdict
The Double Din Dash Radio Trim Kit for Dodge Ram 1500/2500 (2013-2019) is a practical bezel solution for shoppers installing an aftermarket double-DIN radio, with the added benefit of supporting both 7-inch and 9-inch formats. If you are prepared to double-check clearance for knobs and ensure your radio integration behaves correctly in your specific build, it can be a straightforward way to restore a factory-like dash finish.
FAQs
Will this trim kit fit a 2014 Dodge Ram 1500 or 2500?
It is intended for Dodge Ram 1500 and 2500 models from 2013 to 2019, so it should align with 2014 fitment. Still, confirm your exact radio size and mounting layout before ordering.
Does it support both 7-inch and 9-inch double-DIN radios?
Yes. The kit is designed to work with both sizes. A smaller frame can be used for 7-inch radio installations, while 9-inch radios can be installed directly without using that smaller frame.
Is it easy to install?
Some buyers describe it as a straightforward fix that “did the job” and fit well. As with any dash bezel, actual ease depends on your radio model, mounting depth, and how everything clears around knobs and nearby controls.
Why do some buyers mention tight knob clearance?
A tight fit can happen when the radio sits very close to the bezel area, leaving less space for physical controls. If your radio relies on knobs that move a lot, verify clearance during installation.
Can this kit affect vent control behavior?
There are buyer mentions of vent adjustment behavior feeling limited after installation. If vent control or climate airflow routing is a priority, double-check how the assembled bezel and radio seating interact with dash components.
Does it work with backup cameras?
Camera functionality can depend heavily on the specific radio and vehicle wiring integration, so it is worth confirming compatibility for your exact radio model.
Specifications
| Product Title | Double Din Dash Radio Trim Kit for Dodge Ram 1500 2500 5500 2013-2019 Installation Bezel 9 Inches (Ram 1500/2500) |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Vehicle Electronics Accessories > Installation Services |
| Brand | DKMUS |
| Manufacturer | DKMUS |
| Item Weight | 5.3 ounces |
| Model | for Dodge Ram 1500 Dash Kit |
| Item model number | Ram 1500/2500 |
| Manufacturer Part Number | DO 021N |
Available variants
Model
- Ram 1500/2500
- Ram 5500
Recommended next
Sky High Car Audio (10) 1/0 Gauge Copper Ring Terminals
A 10-pack of 1/0 gauge copper ring terminals with heat shrink for clean, secure high-current wiring. Best for car audio and Big 3 style upgrades that use 3/8” mounting holes, with the main caveat that they may be oversized for some 0 gauge or welding cable setups.
(10) 4 or 8 Gauge Green 3/8" x 2" Heat Shrink Tube 4 Ring Terminals GA Tubing
This (10) pack of Sky High Car Audio heat shrink tubing is designed for 4 and 8 gauge wiring, shrinking to form a tight seal over ring terminals and other connections in 12V car audio installs. It’s a simple upgrade for cleaner-looking, abrasion- and moisture-protective wiring, with the main caveat that you need compatible wire size and the right shrink fit.
Audiopipe 0 Gauge Wire Reducers (PBWR0)
Audiopipe 0 gauge wire reducers (PBWR0) are designed to help clean up a car audio power install, letting you step down big cable to amp-ready lug size. Buyers like the sturdy build and that the reducers clamp securely, but fit can require light material removal depending on the specific amp lugs.
Equalizer Rearview Mirror Installer RMI309
The Equalizer Rearview Mirror Installer RMI309 is a universal fit windshield-mount tool designed specifically for reinstalling spring-loaded rearview mirrors. It is a straightforward, manual option for drivers who prefer to handle mirror reinstallation themselves, with the main caveat being compatibility with the spring-loaded mirror style you have.