Delamu TV Cord Hider, Cord Covers for 3-4 Wires on Wall
Quick take
The Delamu TV Cord Hider is a white, 6-piece cord cover kit meant to clean up wall-mounted TV and media setups by hiding multiple cables in one neat channel. It uses self-adhesive mounting with a snap-on cover, and the channel is cuttable and paintable for a more seamless look. The main thing to consider is adhesive installation, so planning your route and preparing the wall surface matters for best long-term hold.
Pros and cons
Pros
- Designed for 3 to 4 cables, including common TV and network types like HDMI, Cat6 Ethernet, optical, and USB.
- Snap-on, attach-and-snap style makes it easier to open the cover and adjust/add wires later.
- No-tools setup with self-adhesive mounting (clean wall surface first).
- Cuttable to length and paintable so you can match the raceway to your wall or trim.
- Marketed as higher flame-retardant (UL94 V-0 rating).
Cons
- It’s adhesive-first, so repositioning later can be difficult, and removal planning is important.
- The kit does not include extra accessories beyond the cable hider pieces.
- Best results depend on whether your cables fit comfortably without bulging the channel.
What buyers think
Buyer feedback is largely focused on how well these cord covers clean up visible clutter, with many comments highlighting a neater, more “finished” look compared to exposed or drooping cables. Install impressions center on the adhesive being effective when the wall is wiped/cleaned beforehand, and setup being straightforward and quick. Multiple reviewers also mention that cutting the raceway to size works well if you measure first and go carefully. Overall, the recurring themes point to solid everyday functionality for cable organization, with the biggest practical variable being surface prep and correct layout planning.
What this cord hider is for
This kit is aimed at wall-mounted entertainment and work areas where cords are hard to route neatly. It’s intended to conceal several cable types in one channel, including media and connectivity cables, plus power and speaker-style cords in the same general run. At a high level, it’s the kind of solution you use when you want cleaner visuals without going through drywall or using full in-wall cabling.
Capacity and cable fit (3 to 4 wires)
The core selling point here is capacity for about 3 to 4 cables in the raceway. That can be a good match for setups that combine, for example, a thicker power or surge-protector lead with one or two data/media cables. The channel dimensions and flexible interior help it stay relatively slim on the wall while still holding more than the smallest 2-wire covers.
Installation style and how to get a strong bond
Installation is self-adhesive, and the cover is designed to snap into place. In practice, the adhesive method means success depends on surface prep and layout planning:
- Clean the wall where the tape will bond, and let it dry fully.
- Map your route before you commit, since adhesive tape removal and reapplication can be tricky.
- Trim the raceway carefully to the length you need so the cover closes cleanly.
- Once mounted, place the wires inside, then snap the cover on.
Cuttable and paintable for a less noticeable look
Because the raceway is cuttable, you can adapt it to your TV stand height, outlet placement, and device layout. The paintable surface feature is useful if you want the cover to visually blend into wall color or trim instead of standing out as white plastic.
Snap-and-slide access for future changes
One practical reason cord covers get used long-term is cable updates. This design is made so you can open the cover and make adjustments, instead of removing everything from the wall each time you swap a cable or reposition a component.
Safety angle: flame-retardant material
The kit is marketed with a UL94 V-0 flame-retardant rating, aimed at better fire-resistance compared with ordinary materials. If you prioritize that kind of safety consideration for entertainment areas, it’s a relevant differentiator versus basic plastic cord covers that do not make the same claim.
Pros and cons recap
- Best for: buyers who want a cleaner-looking wall-mounted setup, with enough capacity for multiple cables (around 3 to 4) and an easy adhesive install.
- Who should buy: people organizing TV, speaker, power, and network cabling along a straight-ish wall run, and anyone who wants cut-to-length flexibility plus paintable matching.
- Who should avoid (or think twice): shoppers who need screw-based permanence or who frequently re-route cables after installation, since adhesive placement depends heavily on initial planning.
- Main tradeoff: the tape holds well when applied correctly, but adhesive-first mounting makes later repositioning less forgiving.
Alternatives to consider
If you’re comparing cord covers for your specific setup, here are the main decision points to use when looking at alternatives in the cable raceways category:
- Choose a larger channel if your bundle includes thicker leads (for example, a surge protector plus one or more media/data cables).
- Choose a screw-mount model if you want reposition-friendly installs or stronger long-term mechanical holding on challenging surfaces.
- Choose paintable/routable options if blending the raceway matters for your room aesthetics.
Final verdict
The Delamu TV Cord Hider is a practical, visually tidy option for wall-mounted TV and home-office cable runs, especially when you need a cover that can manage about 3 to 4 cables. It’s easy to cut, paintable to blend in, and built for snap-on access so you can adjust cables later. The main caveat is adhesive installation, so spend a few minutes planning the exact path and prepping the wall for the best results.
FAQ
Will this cord hider work for thick cables?
It’s designed for 3 to 4 cables and is intended to handle common TV and network cords, including options that may be thicker than a single standard HDMI lead. Fit depends on how your specific cables sit together in the channel.
Is it easy to install, or does it require tools?
It’s designed for self-adhesive installation with no tools required for mounting. You may still want measuring and careful trimming tools to cut it to the right length.
Can I cut it to match my wall layout?
Yes, the raceway is cuttable so you can trim it to the length needed for your TV and outlet placement.
Can it be painted to match the wall?
Yes, the cord hider is marketed as paintable, which can help it blend into your wall color or décor.
Does the kit include accessories?
The kit includes the cord hider pieces, but it does not include additional accessories beyond what’s listed in the kit.
How do I add or change cables after installation?
The snap-on cover design is made so you can open it and adjust the cables without removing the entire raceway from the wall.
Specifications
| Product Title | Delamu TV Cord Hider, Cord Covers for 3-4 Wires on Wall, Large Cable Hider Cable Management, Easy Set up Wire Hiders Wire Covers for Cords on Wall, TV Cables Cover Raceway, 6X W1.18 H0.67in, White |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Cable Raceways |
| Brand | Delamu |
| Manufacturer | Delamu |
| Model Number | CC02 |
| Color | White |
| Material | Polyvinyl Chloride |
| Product Dimensions | 85"L x 1.18"W |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Number of Pieces | 6 |
| UPC | 747100203930 |
| Unit Count | 7.875 Feet |
| Mfr Part Number | CC02 |
| Warranty Description | no |
| Item Type Name | Cord Cover |
| Enclosure Material | Polyvinyl Chloride |
| Item Dimensions L x W | 85"L x 1.18"W |
| Installation Type | Self-Adhesive |
| Style Name | Cord Hider |
| Style | Cord Hider |
Available variants
Size
- 1.18in W x 0.67in H x 85in L
- 1.18in W x 0.67in H x 236in L
- 1.18in W x 0.67in H x 254in L
- 1.0in W x 0.53in H x 85in L
Color
- Grey
- White
- Black
- Beige
- DarkWood
- CherryWood
Recommended next
630in Cord Hider Kit, Paintable Cable Raceway, Cord Covers for Wires on Wall (YesBes)
A long, connector-rich cord hider kit designed to make wall-mounted TV setups look cleaner fast. It uses self-adhesive installation (no drilling), snaps shut to conceal 2 to 4 cords, and can be cut and painted to match your wall.
EVEO Cable Hider Wall - 153" Wall Cord Hider (White)
The EVEO Cable Hider Wall is a self-adhesive cable raceway designed to conceal messy cords along baseboards, desks, or behind a wall-mounted TV. It’s cuttable, paintable, and uses a snap-on cover, making it a practical way to improve both the look and day-to-day safety of exposed cables, with the main tradeoff being how strongly the adhesive bonds to the wall.
Under Desk Cable Management Tray No Drill, Metal Mesh Cable review
This no-drill under-desk cable management tray from Litwaro uses a clamp mount and a 2-hole mesh design to keep power strips, adapters, and cable runs off the floor. It’s best for flat-edge desks in the 0.4 to 2 inch thickness range, and the main tradeoff is fit: awkward or non-flat desk edges may limit how securely it clamps.
Delamu Cord Hider, 157in Wire Covers for Cords on Wall
The Delamu Cord Hider (157-inch wall-mounted cable raceway) is designed to conceal 2 to 3 cords in a clean, paintable channel. It installs with an attach-and-snap design and can use adhesive tape or screws, but the adhesive tape is strong enough to risk paint damage if you remove it later.