CXRCY Cable Ramp 3 Pack 2 Channel 11000lbs Axle Capacity Floor Cord Cover
Quick take
The CXRCY Cable Ramp 3 Pack is a dual-channel rubber cable protector designed to route hoses and cords across walkways, driveways, and event spaces while adding a speed-bump style barrier. It is a strong fit for outdoor hose runs, light equipment traffic, and temporary cable management where visibility matters. The main caveat from buyer feedback is that some units can have a very noticeable rubber odor, and there is at least one report of the yellow top covers cracking over time.
Pros and cons
Pros
- Dual-channel design helps keep cables and hoses separated in the same crossing.
- Rubber construction with a ribbed, non-slip base intended to reduce sliding on smoother floors.
- Bright yellow and black, highly visible for day and night approaches.
- High stated load capacity (11,000 lbs per axle) for demanding traffic conditions.
Cons
- Buyer reports mention a strong rubber odor that can linger for weeks.
- The yellow cover portion may be less durable than the base for some setups, especially if the ramp is driven over or not secured.
- Self-contained floor covers can still require correct placement for reliable, stable coverage of the crossing.
What buyers think
Buyer-review evidence for this cable ramp is fairly consistent on a few decision factors: the ramps tend to be perceived as sturdy and effective for their intended purpose (protecting hoses and cables across a walkway or entry). Many users also highlight the ramp’s weight and overall “stays put” feel, which matters when people or equipment pass over the crossing. Visibility is another recurring positive theme, with the bright yellow strip making the protected area easier to notice.
At the same time, the clearest negative pattern in the reviews is odor. Multiple buyers describe a strong rubber smell that is noticeable during use, and at least one report says the odor persisted long after installation. Durability feedback is mixed: one longer-term review says the rubber base held up, but the yellow top covers cracked and popped open after vehicle traffic, suggesting that the top hinge/cover section may be the first weak point under repeated driving loads.
What this cable ramp is for
This is a floor cord and hose protector built to cover cables and hoses where they cross areas with foot traffic or vehicle traffic. The dual-channel layout is intended for routing two lines at once (for example, a hose plus a cord, or two cords), while the raised ramp surface helps vehicles and people cross without crushing cabling.
It can also be used in outdoor and event-style environments where you need temporary or semi-permanent protection across walkways, exhibition spaces, and similar high-visibility routes.
Key features that affect real-world use
Dual channels for separating two lines
Instead of a single wide trough, this design uses two channels. That can reduce pinching and tangling when you are running two items side by side (such as a water hose and an extension cord).
Non-slip base and push-in cable routing
The base uses non-slip texture, and the system is designed for easy setup by pushing cords into the cable cavity. For cable management, this matters because quick installation reduces the “temporary setup” friction that often leads people to route cords less safely.
Visibility for safer crossings
The bright yellow and black profile is meant to stand out during the day and at night. In practice, this helps people notice the protected crossing area, which can lower trip risk and reduce the chance someone drives over an unprotected section of hose or cable.
Temperature and load rating considerations
The ramp is rated for an operating temperature range of -40°F to 131°F and lists a load capacity of 11,000 lbs per axle (approx). If your use case includes harsh outdoor seasons or you expect heavier traffic patterns, these specs are the reason shoppers choose this style of ramp rather than a smaller, lighter cord cover.
Pros and cons breakdown
Best for
- Outdoor hose runs and driveway-adjacent crossings where you want a durable barrier that stands out.
- Event setups and temporary cable management with moderate to heavier foot and light equipment traffic.
- Buyers needing two-channel protection to keep multiple cords or a cord plus hose organized in one crossing.
Who should buy
- You want a floor cord cover that feels substantial and is designed for vehicle-crossing style protection.
- You prioritize visibility (bright yellow strip) and non-slip contact with the ground.
- You are comfortable selecting a ramp based on stated load and temperature range for your environment.
Who should avoid or double-check fit
- Sensitive indoor spaces where odor could be an issue. Reviews indicate the rubber smell can be strong and persist.
- Repeated heavy driving over the top cover if you need the hinged/yellow portion to remain pristine. One longer-term report suggests the top covers may crack or pop open under vehicle loads.
- Short crossings that do not match the ramp length, where the edges could become a snag point if lines are not positioned well.
Installation and placement tips
- Use correct alignment so the cables and hoses sit centered in the channels, not near the ramp edge.
- Consider securing for heavy traffic .
- Plan for odor if you are installing near living or working areas. If the ramp is for a garage interior or a small indoor space, it may be worth thinking about ventilation or choosing a different setup.
Price and availability
The CXRCY Cable Ramp 3 Pack is offered as a bundle, and pricing can vary by retailer and timing. If you are comparing options, focus less on the sticker price and more on whether the channel count (2-channel), the ramp footprint (40 in length), and the stated load rating match your traffic needs.
Alternatives to consider (by use case)
If the CXRCY ramp is not a perfect match, here are category-based alternatives to compare:
- Light-duty cable covers for indoor use: Look for lower-odor materials and designs aimed at foot traffic only, especially if you need something for garages or offices where rubber smell could bother you.
- Multi-channel cable protectors: If you routinely cross many lines, compare higher channel counts and wider troughs so multiple cords fit without crowding.
- Hard-shell ramps vs.
Verdict
The CXRCY Cable Ramp 3 Pack is a solid choice if you need a visible, dual-channel rubber ramp to protect hoses and cords across busy crossings, especially outdoors. The biggest watch-outs are odor and top-cover durability under repeated vehicle stress. If your use case is compatible and you place it thoughtfully, it can be a practical way to keep cabling safer and reduce trip hazards.
FAQ
How many channels does the CXRCY cable ramp have?
It is a dual-channel design, intended to route and protect two lines (cables and/or hoses) at the same crossing.
What is the load capacity of these cable ramps?
The ramp lists a load capacity of 11,000 lbs per axle (approx).
What are the dimensions of each ramp?
Each ramp measures about 40 in long by 10 in wide by 2 in high.
Is this cable ramp suitable for outdoor use?
Yes, it is designed for indoor and outdoor protection, with an operating temperature range listed from -40°F to 131°F.
Do buyers report any issues with odor?
Yes. Multiple buyers mention a strong rubber smell, with at least one report indicating the odor remained noticeable for a long time after installation.
Does the ramp have a non-slip base?
Yes. The bottom is designed with anti-slip texture to help reduce sliding on smooth floors.
Can it be used for cords in a garage?
It can be used for cable protection, but if you are sensitive to odors or need a low-odor option for enclosed spaces, you may want to consider that buyer feedback indicates the rubber smell can be significant.
Specifications
| Product Title | CXRCY Cable Ramp 3 Pack 2 Channel 11000lbs axle Capacity Floor Cord Cable Protector, Rubber Speed Bumps Hose Protector Ramps for Wire/Hose/Pipe Hider Driveway &Outdoor 40x10x2 inch(L x W x H) |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Floor Cord Covers |
| Brand | CXRCY |
| Manufacturer | YS |
| Model Number | YS-SC3P |
| Color | Black & Yellow |
| Material | Plastic, Rubber |
| Item Weight | 34.8 Pounds |
| Product Dimensions | 40"L x 10"W |
| Unit Count | 3.0 Count |
| Warranty Description | 3 moth |
| Enclosure Material | Plastic, Rubber |
| Item Dimensions L x W | 40"L x 10"W |
| Installation Type | Self-Adhesive |
| Style Name | Industrial |
| Style | Industrial |
Available variants
Size
- 4 Pack 1 Channel
- 5 Pack 2 Channel
- 2 Pack 5 Channel
- 2 Pack 2 Channel
- 1 Pack 5 Channel
- 3 Pack 2 Channel
- 1 Pack 2 Channel
- 2 Pack 3 Channel
- 4 Pack 2 Channel
Recommended next
D-Line 6ft Floor Cord Cover, Cable Protector, Hide Extension Cords, Prevent Cable Trips - Black
The D-Line 6ft Floor Cord Cover is a flexible PVC channel designed to route and conceal extension cords in busy areas. It uncoils to lay flat, has a ribbed non-slip base with a pre-split back for easier setup, and can be cut to fit. The main tradeoff is it is not floor-adhered, so some floors may need positioning care to keep the cover straight.
D-Line 6ft Floor Cord Cover, Cable Protector, Hide Extension Cords
The D-Line 6ft Floor Cord Cover is a low-profile floor cable hider designed to reduce trip risk for extension cords and other cables in busy spaces. It’s flexible PVC, uncoils to lay flat, cuts to length, and uses a ribbed non-slip base with a pre-split rear for tool-free setup, though it’s not an adhesive floor mount.
Legrand - Wiremold Cord Cover, Ivory Hider for Wall Mount TV, 5 Ft Floor or Wall Cord Cover, CDI-5
The Legrand Wiremold CDI-5 is a 5-foot ivory floor cord cover designed to conceal TV and power cords, reduce tripping risk, and create a cleaner look in high-traffic areas. It’s easy to cut and install with included pressure-sensitive tape, but it’s sized for slimmer cable runs and can be less forgiving on very smooth floors if the ends are not well secured.
Floor Cord Cover Self Adhesive Cord Hider,10FT Cable Management, Extension
This 10-foot self-adhesive floor cord cover helps route and conceal low-profile cables on hard floors to reduce trip hazards. It installs quickly with a tape backing, cuts to length, and fits a narrow internal channel for cables up to about 0.27 inch diameter, so the main tradeoff is cable size.