D-Line 6ft Floor Cord Cover, Cable Protector, Hide Extension Cords
Quick take
The D-Line 6ft Floor Cord Cover is a flexible PVC cable protector that lays flat on floors to help reduce trip hazards from trailing extension cords. It’s a good fit for offices, classrooms, retail, and other walk-heavy areas where you want cords contained and out of sight, but it is designed to be freestanding (not adhesive), so it may shift depending on your floor and placement.
Pros and cons
Pros
- Flexible PVC cable cover that uncoils to lay flat and can be cut to match your run length
- Low-profile, ribbed non-slip base to help keep it in place on the floor
- Easy, tool-free setup with a pre-split rear opening to place cords inside
- Designed to protect cords up to about 2 cables within the stated inner channel size
Cons
- Freestanding design, it does not adhere to the floor (plan on relying on the base and your fit)
- Only indoor use is specified
- Cord fit depends on the inner channel dimensions, larger plugs or thicker cables may not work as easily
What buyers think
Buyer-review evidence is strongly positive for day-to-day usefulness. Many shoppers describe the cover as easy to install (open, place cable, press closed), durable-feeling, and effective at creating a cleaner, more organized look while keeping cords low to the floor. Users also frequently mention that it stays flatter over time and helps reduce trip risk in busy walkways. The most consistent limitation is that it is not an adhesive floor mount, so behavior can vary when the cover is shipped tightly rolled or placed on different floor types.
What this floor cord cover is for
This is a floor cable hider intended for scenarios where cords cross areas people walk, wheel chairs, or move around. Common use cases include extension cords in offices and warehouses, classroom or event setups, retail or hospitality spaces, and gaming or desk locations where cables need to stay contained and visually tidy.
Design and fit: will your cords fit inside?
The cover’s inner channel is sized to accommodate cables up to about 0.63 in (W) x 0.31 in (H). That means it’s primarily meant for typical extension cords and similar cable profiles, and the product is described as usable for protecting up to two cables (based on the channel size).
If your cable bundle is thicker, has unusually bulky connectors, or you plan to run multiple cables together, measure both the cable diameter and the way the connector transitions into the cover. The pre-split rear makes feeding easier, but the channel still limits what will slide in comfortably.
Installation experience, cut-to-length flexibility, and staying put
Installation is designed to be straightforward: the cover is made from flexible PVC, supplied coiled, and expected to uncoil and lie flat without requiring special treatment. If your cord run is shorter than 6 ft, you can cut the cover to size with a sharp utility knife or heavy-duty scissors.
For placement, it uses a ribbed non-slip base and a pre-split rear for easier closing without adhesive tape. However, the cover is described as freestanding, and some buyers note it does not adhere to the floor. If your area gets a lot of foot traffic or if the floor surface is smooth, plan to check alignment after installation and ensure the cover fully closes on the cable.
Pros and cons recap (who it’s best for)
Best for
- Anyone trying to reduce cord trip risk in walk-heavy indoor areas
- Workspaces and events where you want cords hidden with a low-profile cover
- Buyers who need a cut-to-length solution for a 6 ft run
- People who prefer tool-free setup rather than adhesive mounting
Who should avoid it
- If you specifically need an adhesive, wall-like mount that stays put on its own
- If your cords are much thicker than the stated inner channel opening or you need to route bulky connectors through the cover
- If you need outdoor-rated use (only indoor use is specified)
Price and availability
This 6 ft floor cord cover is positioned as a budget-friendly cord management accessory, and it’s typically easier to justify when you have a clear cord path to protect (for example, a single cross-traffic run). If you only need to cover a very short distance, the cut-to-length feature helps avoid wasting the full 6 ft length.
Verdict
The D-Line 6ft Floor Cord Cover is a practical, low-profile way to protect and hide extension cords across indoor walkways. It scores well for ease of installation, cut-to-size flexibility, and a design intended to stay flatter and safer in daily use, but it is not an adhesive solution. If you can rely on the ribbed base and get the fit right, it can be a clean, effective fix for cord clutter and trip hazards.
Want to double-check today’s pricing and color options? Buy on Amazon
FAQ
How many cables can this floor cord cover hold?
It’s designed around an inner channel size of about 0.63 in (W) x 0.31 in (H), and is described as usable for protecting up to two cables based on that opening.
Does it stick to the floor with adhesive?
No, it’s a freestanding design that uses a ribbed non-slip base. Some buyers find it may not adhere, so placement stability depends on your floor type and how well it closes on the cable.
Can you cut it to shorter lengths?
Yes. It can be cut to size with a sharp utility knife or heavy-duty scissors if your cord run is shorter than 6 ft.
Is it safe to use on different indoor flooring types?
It’s specified for indoor use and is intended to grip via the ribbed non-slip base. If your floor is very smooth, take a moment after installation to confirm it stays aligned and closed.
What are the key dimensions to check before buying?
Focus on the inner channel dimensions (0.63 in x 0.31 in) and the outer dimensions (about 2.4 in wide x 0.44 in high, with a 6 ft length). Make sure your cable and connectors can fit into the channel.
Specifications
| Product Title | D-Line 6ft Floor Cord Cover, Cable Protector, Hide Extension Cords, Protect Cords, Prevent Cable Trips, Heavy Duty Cord Hider - Cable Cavity = 0.63" (W) x 0.31" (H) - Beige |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Floor Cord Covers |
| Brand | D-Line |
| Manufacturer | D-Line |
| Model Number | CC-3 |
| Color | Beige |
| Material | Polyvinyl Chloride |
| Product Dimensions | 72"L x 2.4"W |
| Indoor Outdoor Usage | Indoor |
| Number of Pieces | 1 |
| UPC | 818165013823 |
| Unit Count | 6 Feet |
| Mfr Part Number | CC-3 |
| Warranty Description | 1 Year |
| Enclosure Material | Polyvinyl Chloride |
| Item Dimensions L x W | 72"L x 2.4"W |
| Installation Type | Freestanding |
| Style Name | Heavy Duty |
| Style | Heavy Duty |
Available variants
Size
- 6 Feet
- 30 Feet
Color
- Brown
- Gray
- Beige
- Black
- Yellow
Recommended next
D-Line 6ft Floor Cord Cover, Cable Protector, Hide Extension Cords, Prevent Cable Trips - Black
The D-Line 6ft Floor Cord Cover is a flexible PVC channel designed to route and conceal extension cords in busy areas. It uncoils to lay flat, has a ribbed non-slip base with a pre-split back for easier setup, and can be cut to fit. The main tradeoff is it is not floor-adhered, so some floors may need positioning care to keep the cover straight.
Legrand - Wiremold Cord Cover, Ivory Hider for Wall Mount TV, 5 Ft Floor or Wall Cord Cover, CDI-5
The Legrand Wiremold CDI-5 is a 5-foot ivory floor cord cover designed to conceal TV and power cords, reduce tripping risk, and create a cleaner look in high-traffic areas. It’s easy to cut and install with included pressure-sensitive tape, but it’s sized for slimmer cable runs and can be less forgiving on very smooth floors if the ends are not well secured.
Cordinate 6ft Floor Cord Cover, Cable Protector, Hide Extension Cords, Protect Cords, Prevent Cable Trips, Heavy Duty Cord Hider - Cable Cavity = 0.75" (W) x 0.43" (H) - Tan
The Cordinate 6ft floor cord cover is a low-profile PVC channel designed to route HDMI, power, and other cables safely across open floors without creating a trip hazard. It uses a split-channel design for easier cutting and includes double-sided tape for installation, but some buyers report the ends and tape may not hold as well in certain conditions (especially until the cover lays fully flat).
Cable Organizer Box Set of Three, Power Cover Cord Holder Surge Protector for Desk (Black)
The Naeety cable organizer box set includes three cord-cover boxes in different sizes plus 28 cable-management accessories, designed to hide power strips and reduce visible clutter around desks or living spaces. Buyers highlight easier setup, a tidy look, and added usefulness for safety-focused cord routing, with the main tradeoff being that it is made from plastic rather than the most rugged material.