Legrand - Wiremold Cord Cover, Ivory Hider for Wall Mount TV, 5 Ft Floor or Wall Cord Cover, CDI-5
Quick take
The Legrand Wiremold CDI-5 is a low-profile, self-adhesive floor cord cover for hiding and protecting a small number of cords across indoor floor surfaces. It’s commonly used to tame TV and power cables in walkthrough areas, and buyers like how it helps reduce trip hazards and stays in place when properly taped. The main caveat is fit, it is meant for slimmer cords and can shift on smoother floors if the installation or end taping isn’t solid.
Pros and cons
Pros
- Helps conceal cords and create a smoother, low-profile surface over the floor.
- Designed for straightforward customization, cut-to-length with scissors or a utility knife.
- Uses pressure-sensitive tape (included) and self-adhesive backing for installation on indoor flooring surfaces.
- Buyers report it can lay flat and is usable on carpet and hard flooring when secured properly.
Cons
- Channel size is limited, so it’s better for one thicker cord or a small bundle of slimmer cables.
- Some users mention it may feel lightweight or can shift on smooth floors unless ends are well taped.
- Because it is packaged tightly, there is a possibility of a section arriving bent and not returning fully to flat, limiting usable length.
What buyers think
Buyer-review evidence points to a consistent use-case: making cords less noticeable and reducing underfoot risk where cables cross walkways. Many comments emphasize the cover’s practical build quality for the category, ease of cutting, and the way it can look cleaner than leaving cords exposed. Installation and stability themes also show up, several shoppers report it stays down well, while others note that it may need extra attention at the ends on smooth surfaces. Color matching is also mentioned, ivory tends to blend better on lighter floors, though some buyers still expect a “plastic” look in any setting. Overall, review patterns suggest this is a helpful, simple cord-management solution, with performance most reliable when your cord diameter and number of cables match the channel.
What it is and what it’s for
This 5-foot Wiremold CDI-5 cord cover (ivory) is meant to protect and conceal cabling that runs along or across indoor floors. It’s commonly considered for wall-mounted TVs where the power cord, and possibly other low-voltage cables, need a safer path to a nearby outlet. With a low-profile, beveled design intended to sit flatter than an uncovered cord, it aims to reduce tripping risk while tidying the look of a cable run.
Key features that matter in real rooms
Low-profile floor protection
The cover is designed to be thin enough to help create a smoother surface over the cable. Buyers frequently describe it as “low” and “trip-proof” compared with leaving cords exposed, especially when cords cross a walkway.
Cut-to-length installation
You can cut it to the length you need using scissors or a utility knife. That makes the 5-foot length practical for small setups, like covering a short run from a TV area to a power source.
Self-adhesive tape for indoor floors
The product includes pressure-sensitive tape for mounting to indoor flooring surfaces. Reviews generally support that it can adhere well, but stability depends on clean, proper application, and securing the ends.
Cable capacity is limited
The slot dimensions are listed as 2 1/2" L x 7/16" H x 1/2" W, which signals a narrow channel. In practice, buyers describe it as best for one thicker cord or a small number of standard cords, rather than bulky power bricks or heavy multi-cable bundles.
Installation tips to avoid common friction
- Plan the route and measure first: Since it comes as a 5-foot strip, cutting accurately helps you avoid waste.
- Prep the floor surface: Adhesion will be better on a clean, dry surface, and tape is more likely to hold when the floor is not dusty or oily.
- Secure the ends: Some buyers note the cover can shift on smooth floors if the ends are not taped down effectively.
- Use the right cable profile: If your setup includes a bulky plug, consider routing so only the cord runs through the channel (not the plug body).
Pros and cons (expanded)
Pros
- Better safety and tidiness than exposed cords: The main value is underfoot protection with a cleaner cable line.
- Simple tools, simple method: Cut-to-size and self-adhesive tape make setup approachable for DIY installs.
- Works across common indoor surfaces: Reviews mention carpet and hard floors as workable when installed properly.
- Good value perception for short runs: Shoppers often frame it as an inexpensive way to make a cable crossing look intentional.
Cons
- Not built for every cord type: Capacity limitations mean it’s not ideal for thick plugs or wide cable bundles.
- Stability depends on surface and installation: Some buyers report shifting on smooth floors unless end sections are secured.
- Packaging can affect usable length: There is at least some review evidence that a portion can arrive bent and may not flatten fully, potentially reducing usable coverage.
Who should buy this cord cover
- You want to hide a short, indoor cord run where cables cross a walkway.
- You’re setting up a wall-mounted TV and need a tidy path for power cables, possibly along the floor.
- Your cord(s) fit the channel size, for example one thicker cord or a few thinner standard cords.
- You prefer a DIY, cut-to-length solution with included tape.
Who should avoid it
- You need to cover a large number of thick cables or a bulky adapter footprint, the channel is narrow.
- You expect the cover to remain perfectly stable on very smooth floors without careful end taping, since some shoppers report shifting.
- You’re dealing with a setup where you cannot spare any usable length if a section arrives bent, because a bent-arrival issue can reduce what you can use.
Alternatives to consider (by what you’re optimizing)
If the CDI-5 doesn’t match your needs, consider alternatives based on these priorities:
- More cable capacity: Look for floor cord covers with a wider channel if you need to route multiple thicker cables.
- Better matching to your decor: If ivory doesn’t fit your floors, explore different color options within the same cord-cover style.
- Hard-to-adhere surfaces: If your flooring is challenging for tape, you may want a solution designed for stronger mechanical retention (though that depends on the alternative model’s installation method).
Verdict
The Legrand Wiremold CDI-5 is a practical, low-profile floor cord cover for indoor walkthrough areas where you want to reduce tripping risk and clean up TV and power cables. It’s easiest to recommend when your cable or small cord bundle fits the narrow channel and you’re willing to install carefully with attention to end taping. If you need to route bulky plugs or multiple thick cables, you may be better served by a wider-capacity floor cord cover.
FAQ
- What cords does the Wiremold CDI-5 hold?It’s designed for a limited channel size, making it best for one thicker cord or a few thinner standard cords. Bulky plug adapters are likely to be a poor fit.
- Is the CDI-5 easy to cut to length?Yes. It can be cut to the desired length using scissors or a utility knife.
- How does installation work?The cover uses included pressure-sensitive tape and a self-adhesive backing to mount to indoor floor surfaces. Clean, dry surfaces and well-secured ends help stability.
- Will it work on carpet?Buyers report it can work on carpet, especially when installed and secured properly.
- Does it help reduce tripping hazards?The low-profile, beveled design is intended to create a smoother surface over the cord, and many buyers describe it as reducing underfoot risk compared with exposed cabling.
Specifications
| Product Title | Legrand - Wiremold Cord Cover, Ivory Hider for Wall Mount TV, 5 Ft Floor or Wall Cord Cover, CDI-5 |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Floor Cord Covers |
| Brand | Wiremold |
| Manufacturer | Legrand Wiremold |
| Model Number | CDI-5 |
| Color | Ivory |
| Material | Plastic |
| Item Weight | 927 Grams |
| Product Dimensions | 60"L x 2.5"W |
| Indoor Outdoor Usage | Indoor |
| Number of Pieces | 1 |
| UPC | 086698870118 |
| Unit Count | 5.0 Feet |
| Global Trade Identification Number | 00086698870118 |
| Mfr Part Number | CDI-5 |
| Warranty Description | 1 year |
| Built-In Media | 5ft Wiremold Corduct Overfloor Cord Protector - Ivory |
| Item Type Name | Legrand Wiremold CDI-5 Corduct 5 Foot Cord Cover for Floors, Holds 1 Cord or Cable, Ivory (1 Pack) |
| Enclosure Material | Plastic |
| Item Dimensions L x W | 60"L x 2.5"W |
| Installation Type | Freestanding,Self Adhesive |
| Style Name | 5 Feet |
| Style | 5 Feet |
Available variants
Color
- Brown
- Gray
- Ivory
- Black
Size
- 15 Feet
- 5 Feet
- 50 Feet
Recommended next
D-Line 6ft Floor Cord Cover, Cable Protector, Hide Extension Cords, Prevent Cable Trips - Black
The D-Line 6ft Floor Cord Cover is a flexible PVC channel designed to route and conceal extension cords in busy areas. It uncoils to lay flat, has a ribbed non-slip base with a pre-split back for easier setup, and can be cut to fit. The main tradeoff is it is not floor-adhered, so some floors may need positioning care to keep the cover straight.
D-Line 6ft Floor Cord Cover, Cable Protector, Hide Extension Cords
The D-Line 6ft Floor Cord Cover is a low-profile floor cable hider designed to reduce trip risk for extension cords and other cables in busy spaces. It’s flexible PVC, uncoils to lay flat, cuts to length, and uses a ribbed non-slip base with a pre-split rear for tool-free setup, though it’s not an adhesive floor mount.
Happybuy 3 Pack of 2 Channel 11000lbs per Axle Capacity Protective Wire Cord Ramp Driveway Rubber Traffic Speed Bumps Cable Protector
The Happybuy 3 pack of 2-channel rubber cord ramps is built to protect extension cords, hoses, and network cables in high-traffic areas. With a modular, interlocking design and a flip-open top, it’s a practical choice for driveways, garages, and job sites where cables need both visibility and road-safe coverage, with the main tradeoff being a higher, noticeable ramp profile.
Eapele 10 ft Floor Cable Cover Protector, Heavy Duty PVC Duct
The Eapele 10 ft floor cable cover is a heavy-duty PVC channel designed to route cords safely and reduce trip hazards in garages, patios, workshops, and home offices. Reviews commonly highlight that it lays flat once installed, gives a tidy, secure look, and handles regular foot or vehicle traffic, with the main caveat being that the strip may need time to fully relax/curl out at the ends after unrolling.