BrosTrend 5 Port 2.5GB Switch, Unmanaged Ethernet Switch for Game Console, PC, NAS, etc.
Quick take
This is a compact, fanless unmanaged 2.5Gb Ethernet switch that adds five RJ45 ports for multi-gig wired devices like gaming consoles, PCs, and NAS. It’s built for plug-and-play setup, and buyers commonly describe stable connectivity and full 2.5Gb performance when paired with 2.5Gb-capable gear. The main limitation is port count, so it may not be enough if you need to wire many rooms or devices.
Pros and cons
Pros
- Unmanaged plug-and-play design (no software setup required)
- Fanless operation for quiet use, including 24/7 setups
- Five RJ45 2.5Gb ports for multi-gig upgrades without extra optical gear
- Buyers report full-speed results and stable throughput for 2 gig fiber setups
Cons
- Only 5 ports, so it may require additional switches for larger networks
- Unmanaged means no VLAN or advanced traffic features for homelabs
- Best performance depends on your devices and cables supporting 2.5Gb
What buyers think
Buyer-review evidence is strongly centered on easy setup and day-to-day reliability. Multiple buyers describe it as truly plug-and-play, with wired devices maintaining the expected multi-gig speeds on 2Gb fiber networks. The fanless design is a recurring positive theme, with reports of staying cool enough for long, always-on use and minimal noise. Review detail on more advanced behaviors (like link stability under unusual network loads or compatibility edge cases) is limited, so the overall pattern mostly supports “simple upgrade for multi-gig port expansion.”
What it is and who it’s for
The BrosTrend 5-port 2.5Gb unmanaged switch is meant for people who want more wired endpoints without dealing with managed-switch complexity. Because it’s unmanaged, it automatically forwards traffic without requiring configuration, which makes it a practical fit for:
- Upgrading a home network to multi-gig speeds (2.5Gb) using a router or gateway LAN port
- Wiring gaming systems, smart TVs, and PCs that support 2.5Gb Ethernet
- Connecting a home server, NAS, or other always-on equipment where silence and simplicity matter
- Small offices and LAN setups that need extra ports but do not want VLANs or advanced settings
Key specs that affect everyday use
2.5Gb speeds across all five RJ45 ports
Each of the five ports is RJ45 and rated for 2.5 Gigabits per second, with a stated switching capacity of up to 25 Gbps. In practice, that matters most when your router and end devices also support 2.5Gb Ethernet, so traffic can move beyond standard gigabit limits.
Unmanaged, two-layer switching, and what that means
As an unmanaged Ethernet switch, it handles basic switching without offering VLAN mode or SLA mode features. If your use case is straightforward port expansion, that simplicity is an advantage. If you require segmentation, prioritization policies, or deeper network control, you would likely need a managed switch instead.
Fanless design for quiet operation
It uses a fanless/refined cooling approach and is specified for normal operating temperatures (32°F to 104°F). Buyers also commonly mention it staying cool during 24/7 operation, making it easier to place on a desk or mount behind equipment.
Placement flexibility
At about 5.6 x 3.5 x 0.9 inches and 180 grams, it’s designed to sit in tight spaces. It supports desktop use and wall mounting, which is useful when you want to keep cables short and reduce clutter.
Setup experience (and what to double-check)
For most shoppers, the experience is straightforward: plug in power, connect the switch to your router using any port as an uplink, then connect your wired devices to the remaining ports. The biggest practical “gotchas” are not about software, but about compatibility:
- Your router LAN port and the devices you connect should support 2.5Gb Ethernet.
- Use Ethernet cables that support the speed level you’re targeting (especially if you’re moving from gigabit to multi-gig).
- Because it’s only five ports, plan your wiring order (router uplink plus the devices that benefit most from 2.5Gb).
Pros and cons at a glance
- Best for: people adding 2.5Gb wired ports for gaming PCs, consoles, a NAS or server, and other nearby devices, without wanting to configure a managed switch.
- Good fit if you value: quiet fanless operation, compact mounting, and simple daily use.
- Not ideal if you need: VLANs/advanced network features, or you need more than five additional wired endpoints from one location.
Should you buy the BrosTrend 5-port 2.5Gb switch?
If you’re upgrading to multi-gig networking and want an easy, quiet way to expand Ethernet ports, this model fits the job well. The most compelling reason is its combination of 2.5Gb RJ45 connectivity on five ports, unmanaged plug-and-play behavior, and fanless operation, with buyer reports aligning around stable performance and straightforward setup. It may fall short only when your network is larger than five usable wired connections, or when you need managed-switch features.
FAQ
Is this switch truly plug-and-play?
Yes, it’s designed as an unmanaged switch. That means there’s no software installation or configuration typically required, just power and Ethernet connections.
Will I get 2.5Gb speeds on every port?
The switch is rated for 2.5Gb on its five RJ45 ports. For real 2.5Gb throughput, your router and connected devices also need 2.5Gb Ethernet support, and your cabling should be appropriate for multi-gig use.
How many devices can I connect?
It has five RJ45 ports total. One port is commonly used as the uplink to your router (though any port can serve as an uplink), leaving the remaining ports for your devices.
Does it have a fan?
No, it uses a fanless design aimed at quiet operation. Buyers also describe it as suitable for always-on use.
Is it a managed switch with VLAN support?
No, it’s an unmanaged switch and is not positioned for VLAN mode or similar advanced configuration features.
What should I consider if my network needs more ports?
If you need more than five wired endpoints in that area, you’ll likely want to add another switch or choose a model with more ports.
Specifications
| Product Title | BrosTrend 5 Port 2.5GB Switch, Unmanaged Ethernet Switch for Game Console, PC, NAS, etc. 2.5 Gigabit Network Switch Fanless Plug & Play, Multi-Gigabit Switch, Desktop / Wall Mount, Lifetime Protection |
|---|---|
| Category | Electronics > Computers & Accessories > Networking Products > Switches |
| Brand | BrosTrend |
| Manufacturer | BrosTrend Technology LLC |
| Model Number | 5-Port 2.5G Ethernet Switch |
| Item Weight | 180 Grams |
| Color | White |
| Number of Ports | 5 |
| Compatible Devices | Compatible with Any Devices with an Ethernet port, such as Gaming Computers, PCs, Desktops, Laptops, Game Consoles, TVs, Wireless Access Points (AP), NAS, Servers, Blu-ray Players, Printers, VoIP Phones, Ethernet Switches and MUCH MORE |
| Voltage | 12 Volts (DC) |
| Lower Temperature Rating | 32 Degrees Fahrenheit |
| Maximum Power | 12 Watts |
| Upper Temperature Rating | 104 Degrees Fahrenheit |
| Interface | RJ45 |
| Data Transfer Rate | 2.5 Gigabits Per Second |
| Current Rating | 1 Amps |
| Switch Type | Unmanged Ethernet Switch |
| Platform | Not Machine Specific |
| Number of Layers | 2 |
| Item Dimensions L x W x H | 5.6"L x 3.5"W x 0.9"H |
| Built-In Media | 1 x 5-Port 2.5G Ethernet Switch, 1 x Power Adapter, 1 x Quick Installation Guide |
| Warranty Description | Register for Limited Lifetime Protection |
| Mfr Part Number | 5 Ports 2.5G Ethernet Switch |
| Unit Count | 1.0 Count |
| Case Material Type | Plastic |
| Included Components | 1 x 5-Port 2.5G Ethernet Switch, 1 x Power Adapter, 1 x Quick Installation Guide |
Recommended next
TP-Link TL-SG105S-M2 5-Port 2.5G Multi-Gigabit Unmanaged Switch
The TP-Link TL-SG105S-M2 is a 5-port unmanaged 2.5GbE (Multi-Gig) switch built for plug-and-play expansion, ideal when you want more 2.5G Ethernet connections for a small home office or media setup. It’s fanless and uses a metal case, but you’ll want to confirm it fits your mounting approach and that unmanaged behavior matches your networking needs.
NETGEAR 5-Port Gigabit Ethernet Unmanaged Essentials Switch (GS305)
The NETGEAR GS305 is a simple 5-port gigabit, unmanaged Ethernet switch built for quick wired upgrades in homes and small offices. It’s plug-and-play, designed for silent operation, and supports both desktop and wall mounting, with an energy-efficient mode. The main caveat is it’s unmanaged, so it’s not the choice if you need advanced controls or VLAN features.
24 Port Gigabit PoE Switch with 2 Uplink Gigabit Ports, VIMIN 26 Port Unmanaged PoE Ethernet Switch with 320W Power
This VIMIN 26-port unmanaged gigabit PoE switch is designed to power up to 24 PoE devices and provide fast gigabit uplinks for your network, with a 320W total power budget and one-key VLAN isolation. It is a plug-and-play option if you want PoE for cameras or access points, but it does not support passive PoE, and review evidence is mixed for reliability on some ports.
UGREEN 2.5Gb Switch, 6-Port Ethernet Switch, 5 x 2.5Gb + 1 x 10Gb SFP+
A compact, unmanaged 6-port 2.5Gb Ethernet switch from UGREEN with a dedicated 10Gb SFP+ uplink. It includes three operating modes (standard, link aggregation, and VLAN) for small NAS/PC networks, and buyers generally report stable, faster transfers when they upgrade to 2.5Gb.