UGREEN 2.5Gb Switch, 6-Port Ethernet Switch, 5 x 2.5Gb + 1 x 10Gb SFP+
Quick take
This UGREEN 6-port switch is an unmanaged, Layer 2 option for networks that want 2.5Gb Ethernet to cut down file-transfer bottlenecks, while keeping a faster uplink through a 10Gb SFP+ port. It also offers three modes (standard, link aggregation, and VLAN), and buyers often highlight stable transfers and easy setup, especially in NAS/Unraid-style builds. The main catch is that the SFP+ module is not included, and link aggregation support is limited to static operation.
Pros and cons
Pros
- 5 x 2.5Gb Ethernet ports plus a 10Gb SFP+ uplink for faster backbone connectivity.
- Three operating modes (standard, link aggregation, VLAN) to match different small-network needs.
- Plug-and-play setup with port speed indicator lights and a metal, heat-dissipating design.
- Jumbo frame support up to 12K for more efficient large transfers.
Cons
- SFP+ optics are not included, so you may need to buy an optical module (or a compatible copper module) separately.
- Link aggregation works in static mode rather than dynamic negotiation.
- It is unmanaged, so you will not get advanced features you might expect from managed switches (fine-grain control, monitoring, or deeper VLAN configuration).
What buyers think
Buyer-review evidence for this switch points to a few consistent themes: stability and throughput after moving to 2.5Gb Ethernet, straightforward setup, and good value for the features included. Multiple buyers describe replacing an older switch that was dropping packets or limiting real-world speeds, then seeing more stable and faster transfers. Others specifically mention that the device performs as expected for NAS workloads, and at least a few highlight link aggregation capability as a reason for choosing it. One limitation that shows up in feedback is that link aggregation is not fully flexible, since it is described as static mode, but those buyers still reported success using it with their router setup.
Key features that matter for everyday buying
Port layout: 2.5Gb for your devices, 10Gb for your uplink
The switch gives you five 2.5Gb RJ45 Ethernet ports and one 10Gb SFP+ port. That makes it a practical fit when you want most of your devices to run at 2.5Gb, while pushing traffic upstream to a router, NAS, or server over a faster uplink.
Three modes: standard, link aggregation, and VLAN
One-touch mode switching is built into the unit through three options:
- Standard mode for typical “everything can talk to everything” behavior.
- Link aggregation mode aggregates ports 4 and 5 into an increased bandwidth group (useful for multi-port devices like some NAS setups).
- VLAN mode isolates ports 1-4 from each other, while allowing communication with ports 5-6, which can help reduce unintended cross-device activity in small networks.
If you want segmentation or bandwidth grouping but do not want a managed-switch learning curve, these modes are the main reason to consider this model.
Jumbo frames (up to 12K) for large file transfers
With jumbo frames support up to 12K, the switch is aimed at efficient handling of bigger payloads, which is commonly relevant to NAS backups, media libraries, and sustained transfers.
Connectivity flexibility with SFP+ (module not included)
The 10Gb SFP+ port is designed to work with 1G/2.5G/10G optical modules and RJ45 copper modules. However, the module itself is not included, so factor in that extra purchase if your current gear does not already have compatible optics or a suitable copper SFP+ adapter.
Setup and usability
As an unmanaged switch, setup is typically a matter of plugging in your devices and letting it negotiate link speeds. Indicator lights help show speed status (green for 2.5Gb and yellow for other speeds), which can be useful while troubleshooting whether a device is actually linking at 2.5Gb.
The unit is also designed for both desktop use and wall mounting, which matters in tight home-office or rack-adjacent locations.
Pros and cons for the right buyer
Best for
- Home or small-office networks that want to move up to 2.5Gb Ethernet without going managed.
- NAS and server-adjacent setups where stable throughput matters for routine transfers.
- Builders who want a dedicated 10Gb SFP+ uplink while keeping device connections at 2.5Gb.
- Users who benefit from simple mode-based VLAN or static link aggregation without deeper configuration.
Who should avoid it
- Buyers who need a fully managed switch with advanced monitoring and granular VLAN control.
- Anyone who does not want to purchase an SFP+ module separately (because the uplink optics/adapter are not included).
- Users expecting link aggregation behaviors beyond static operation.
Price and availability
This model is positioned as an affordable 2.5Gb switch option for the feature set, including five 2.5Gb ports and a 10Gb SFP+ uplink. If you are comparing overall value, include the cost of an SFP+ module or adapter in your decision if you do not already own one.
Verdict
UGREEN’s 6-port 2.5Gb switch is a strong match for small networks that need 2.5Gb Ethernet to improve day-to-day transfers, plus a 10Gb SFP+ uplink for faster upstream connectivity. Buyers largely report stable performance after upgrading and appreciate the plug-and-play simplicity. Just confirm you have (or plan to buy) a compatible SFP+ module, and verify that static link aggregation and the switch’s mode approach align with how you want to segment or group devices.
FAQ
- Is this switch managed or unmanaged? It is an unmanaged, Layer 2 switch.
- How many ports does it have, and what speeds are they? It has 6 total ports, with 5 x 2.5Gb Ethernet RJ45 ports and 1 x 10Gb SFP+ port.
- Does it include the SFP+ module? No, the module is not included.
- What are the three modes? Standard mode, link aggregation mode, and VLAN mode.
- Does link aggregation work dynamically? It operates in static mode.
- Can it be mounted on a wall? Yes, it is designed for both desktop and wall mounting.
Specifications
| Product Title | UGREEN 2.5Gb Switch, 6-Port Ethernet Switch, 5 x 2.5Gb + 1 x 10Gb SFP+, Standard/Link Aggregation to 5Gbps/VLAN 3 Modes, Plug & Play Metal Unmanaged Ethernet Splitter, Desktop/Wall Mount, for NAS, PC |
|---|---|
| Category | Electronics > Computers & Accessories > Networking Products > Switches |
| Brand | UGREEN |
| Manufacturer | Ugreen Group Limited |
| Color | Grey |
| Number of Ports | 6 |
| Compatible Devices | Desktop, Gaming Console, Laptop, NAS, Router |
| Interface | RJ45, SFP+ |
| Data Transfer Rate | 2.5 Gigabits Per Second |
| Switch Type | unmanaged, fixed, non-PoE, layer 2 |
| Platform | Not Machine Specific |
| Case Material Type | Metal |
| Item Dimensions L x W x H | 6.3"L x 4.1"W x 1.1"H |
| Built-In Media | 2.5Gb Ethernet Switch, Power Adapter DC 12V, User Guide |
| Warranty Description | 24 Months Warranty Service by UGREEN |
| Unit Count | 1.0 Count |
| Included Components | 2.5Gb Ethernet Switch, Power Adapter DC 12V, User Guide |
Recommended next
TP-Link TL-SG105S-M2 5-Port 2.5G Multi-Gigabit Unmanaged Switch
The TP-Link TL-SG105S-M2 is a 5-port unmanaged 2.5GbE (Multi-Gig) switch built for plug-and-play expansion, ideal when you want more 2.5G Ethernet connections for a small home office or media setup. It’s fanless and uses a metal case, but you’ll want to confirm it fits your mounting approach and that unmanaged behavior matches your networking needs.
NETGEAR 5-Port Gigabit Ethernet Unmanaged Essentials Switch (GS305)
The NETGEAR GS305 is a simple 5-port gigabit, unmanaged Ethernet switch built for quick wired upgrades in homes and small offices. It’s plug-and-play, designed for silent operation, and supports both desktop and wall mounting, with an energy-efficient mode. The main caveat is it’s unmanaged, so it’s not the choice if you need advanced controls or VLAN features.
UGREEN Ethernet Switch, 5 Port Gigabit Ethernet Splitter, Plug & Play (Unmanaged, Fanless)
UGREEN’s 5-port gigabit unmanaged switch is a compact, silent way to add more wired connections for a home office or small LAN. Setup is genuinely plug-and-play, and it’s designed for 10/100/1000 Mbps auto speed with automatic MDI/MDIX, but it is not PoE and the port layout has a small usability tradeoff when wall-mounted.
TP-Link TL-SX105 | 5 Port 10G/Multi-Gig Unmanaged Ethernet Switch
The TP-Link TL-SX105 is a compact, fanless 5-port 10G/multi-gig unmanaged switch designed for simple plug-and-play upgrades to faster Ethernet (including 2.5G/5G/10G devices). It’s easy to deploy and quiet, but buyer feedback is mixed on heat under sustained heavy traffic, so it is best for moderate loads rather than constant maximum throughput.