24 Port Gigabit PoE Switch with 2 Uplink Gigabit Ports, VIMIN 26 Port Unmanaged PoE Ethernet Switch with 320W Power
Quick take
This unmanaged gigabit PoE switch gives you 24 PoE+ RJ45 ports plus two gigabit uplinks, with a 320W total power budget for powering compatible devices like IP cameras and access points. The included one-key VLAN mode can isolate ports 1–24 from each other (while still allowing communication through the uplink), which can be helpful for basic segmentation. The main buying caveat is that it does not support passive PoE, and there is some limited review evidence of defective PoE ports or reliability issues on specific units.
Pros and cons
Pros
- 24 gigabit PoE+ ports with two gigabit uplinks for cameras, APs, and network uplink connections.
- IEEE 802.3af/at support with up to 30W per port and 320W total power budget.
- One-key VLAN mode isolates ports 1–24 to help reduce cross-device traffic.
- Metal housing, 4KV lightning protection, and plug-and-play style installation.
Cons
- Unmanaged switching means fewer configuration options than managed PoE switches.
- Not compatible with passive PoE setups (it supports 802.3af/at only).
- Review evidence includes at least one report of multiple PoE ports not working, suggesting quality-control risk on some units.
What buyers think
Buyer-review evidence is mixed, but the recurring themes are clear. Many buyers describe straightforward plug-and-play setup and dependable PoE power delivery for their cameras or office devices, with comments pointing to good day-to-day performance and value for the feature set. At the same time, there is limited but notable evidence of hardware problems on some units, including reports of PoE ports failing or reconnecting issues. Because the negative reports appear to be unit-specific rather than clearly widespread across all users, buyer-review evidence is best summarized as generally positive for installation and PoE usefulness, with some quality-control uncertainty.
Who this PoE switch is best for
This switch is a strong fit when you want a relatively simple, unmanaged gigabit PoE setup with enough power headroom for a small-to-medium camera or Wi-Fi deployment.
- Home or small business camera systems: 24 PoE+ ports are intended for powering multiple IP cameras from the same switch.
- Small access point and device clusters: If your APs and endpoints use IEEE 802.3af/at, you get gigabit links and a high total power budget (320W).
- Buyers who want less configuration: Unmanaged design suits plug-in growth without needing advanced VLAN controls (beyond the one-key isolation behavior).
- Rack or desk installations: Metal housing plus rack-mount capability makes it suitable for structured setups.
Key features that matter in daily use
PoE power and compatibility
The switch supports IEEE 802.3af/at and is rated for up to 30W per PoE port, with a 320W total power budget. It is also explicitly not passive PoE compatible, so you will want to double-check that every powered device is an 802.3af/at powered device (PD), not an older passive PoE model.
Port layout and uplinks
You get 24 PoE RJ45 ports and two additional gigabit uplink ports for connecting to your router, NVR, or other upstream networking gear. This is a common arrangement for camera-focused networks, where the uplinks carry traffic back to your recorder or main network.
One-key VLAN mode for simpler isolation
The one-key VLAN mode isolates ports 1 through 24 from each other while still communicating with the uplink ports. For many practical scenarios, that means connected devices are less likely to talk directly across the switch fabric, which can help reduce unnecessary peer-to-peer chatter.
Build and protection
The chassis is metal, it is described as having 4KV lightning protection, and it is presented as plug-and-play for simpler installation. If you are mounting this in a rack or a workspace with power variability, these elements are generally the kinds of protections you look for in a PoE switch.
Pros and cons, translated into buying decisions
Why it’s a good value
- If you need a lot of PoE capacity in one box (24 PoE+ ports) plus gigabit uplinks, this gives you that combination without pushing you into a managed-switch learning curve.
- Power budget flexibility (320W total) can help when your devices vary in power draw within the af/at range.
- Port isolation via one-key VLAN can be useful for basic segmentation without deeper configuration work.
What could be a mismatch
- If you require advanced VLAN settings, per-port monitoring, or more granular control, you may prefer a managed PoE switch.
- If any of your devices rely on passive PoE, this switch will not be the right pairing.
- If your deployment cannot tolerate the possibility of a defective port out of the box, it is worth planning for testing immediately after installation.
Price and availability
Pricing can vary by marketplace and time. When shopping, compare the cost against other gigabit PoE switches by looking at three things: number of PoE ports, total power budget, and whether your devices match IEEE 802.3af/at (not passive PoE).
How it compares (by feature priorities)
Because unmanaged PoE switches are usually chosen for simplicity, comparisons should focus on whether you need more control or different power behavior.
- Versus managed PoE switches: This is simpler, but you give up advanced configuration and monitoring. If you manage VLANs or need detailed troubleshooting, a managed model may be worth it.
- Versus lower-power PoE switches: If you have 802.3af/at devices that collectively approach higher draw, the 320W budget can be a deciding factor versus smaller-budget options.
- Versus 100Mbps PoE models: If you expect gigabit cameras or want uplinks that avoid bottlenecks, the gigabit ports are the more future-friendly choice.
Verdict
The VIMIN 24-port gigabit PoE switch is a practical plug-and-play choice for powering a multi-device 802.3af/at network with gigabit performance and a straightforward isolation option. If you match the PoE standard correctly and you do not need managed-switch features, it should cover the essentials well. Just be mindful of the limited reliability evidence, especially regarding PoE port functionality, and test your setup early after installation.
FAQs
Is this PoE switch compatible with passive PoE devices?
No. It supports IEEE 802.3af/at, and it is noted as not supporting passive PoE.
How many devices can it power?
It has 24 PoE RJ45 ports, so it is designed to power up to 24 compatible PoE devices, assuming your total draw stays within the 320W power budget.
Does it include VLAN support?
Yes, it includes a one-key VLAN mode that isolates ports 1–24 from each other while still allowing communication through the uplink ports.
Is it a managed or unmanaged switch?
It is an unmanaged PoE switch, so it is intended for plug-and-play use rather than advanced configuration.
What devices is it commonly used for?
It is commonly used to power network devices such as IP cameras, access points, and other Ethernet devices that support IEEE 802.3af/at PoE.
Specifications
| Product Title | 24 Port Gigabit PoE Switch with 2 Uplink Gigabit Ports, VIMIN 26 Port Unmanaged PoE Ethernet Switch with 320W Power, Support IEEE802.3af/at, VLAN, Metal Housing, 19 inch Rack-Mount, Plug and Play |
|---|---|
| Category | Electronics > Computers & Accessories > Networking Products > Switches |
| Brand | VIMIN |
| Manufacturer | VIMIN |
| Model Number | 26 Port | 24xPoE+320W | 2xUPLink |
| Color | Black |
| Number of Ports | 14 |
| Compatible Devices | Access Point, Camera, Computer, Printer, Router |
| Interface | RJ45 |
| Data Transfer Rate | 1000 Megabits Per Second |
| Switch Type | unmanaged, fixed, PoE |
| Platform | Not Machine Specific |
| Case Material Type | Metal |
| Built-In Media | 1x User Manual, 1x 26-Port PoE Switch, 1x Power Cable |
| Warranty Description | 1 YEAR MANUFACTURER |
| UPC | 756166576988 |
| Mfr Part Number | VM-GS2420P-EU |
| Unit Count | 1.0 Count |
| Included Components | 1x User Manual, 1x 26-Port PoE Switch, 1x Power Cable |
Available variants
Size
- 18 Port Gigabit PoE Switch
- 26 Port Gigabit PoE Switch
- 50 Port Gigabit PoE Switch
- 5 Port Gigabit PoE Switch
- 28 Port Gigabit PoE Switch
- 10 Port Gigabit PoE Switch
Recommended next
TP-Link TL-SG105S-M2 5-Port 2.5G Multi-Gigabit Unmanaged Switch
The TP-Link TL-SG105S-M2 is a 5-port unmanaged 2.5GbE (Multi-Gig) switch built for plug-and-play expansion, ideal when you want more 2.5G Ethernet connections for a small home office or media setup. It’s fanless and uses a metal case, but you’ll want to confirm it fits your mounting approach and that unmanaged behavior matches your networking needs.
NETGEAR 5-Port Gigabit Ethernet Unmanaged Essentials Switch (GS305)
The NETGEAR GS305 is a simple 5-port gigabit, unmanaged Ethernet switch built for quick wired upgrades in homes and small offices. It’s plug-and-play, designed for silent operation, and supports both desktop and wall mounting, with an energy-efficient mode. The main caveat is it’s unmanaged, so it’s not the choice if you need advanced controls or VLAN features.
Ubiquiti UniFi Switch (USW-Lite-16-PoE, 16 Gigabit Ethernet Ports, 8 PoE+ Ports, Wall Mounted)
The Ubiquiti UniFi Switch USW-Lite-16-PoE is a fully managed, Layer 2 gigabit switch built for UniFi controller setups. It includes eight PoE+ ports for powering devices like access points and cameras, with an overall PoE power cap that matters if you plan to run power-hungry gear.
REOLINK PoE Switch with 8 PoE and 2 Gigabit Uplink Ports (RLA-PS1)
The REOLINK RLA-PS1 is a fanless, metal PoE switch built for REOLINK camera setups that need 8 powered camera ports plus 2 gigabit uplinks. It supports IEEE 802.3af/at, delivers up to 30W per PoE port (120W total), and uses power management to keep higher-priority devices online if you approach the power budget.