46PCS NVME M.2 SSD Mounting Screws M.2 SSD Screw Kit for Asus Gigabyte ASRock Msi Motherboards
Quick take
This 46-piece M.2 NVMe mounting hardware kit is designed to help you install, reinstall, or replace the tiny screws and standoffs used to secure an M.2 SSD. It is a good fit for DIY builders and laptop upgraders who want spare mounting parts, especially when washers are needed to stop a little drive wiggle. The main caveat is that you still need to match the correct standoff height and screw type to your specific SSD and slot.
Pros and cons
Pros
- 46 pieces with multiple screw and standoff sizes, helpful for “missing screw” situations
- Includes a magnetic screwdriver to make handling tiny screws easier
- Includes screw washers, which can help reduce SSD movement in some laptop setups
- Made from alloy steel hardware intended to resist rust and corrosion
Cons
- Not every motherboard or drive uses the same height, so you must choose the right standoff and screw
- Best results require careful fit-checking before fully tightening small screws
What buyers think
Buyer-review evidence focuses on convenience and completeness. Multiple reviewers describe it as an inexpensive, practical kit for securing NVMe M.2 drives, and for handling situations where the needed screws or standoffs are missing. Several shoppers also highlight that it includes a magnetic screwdriver and a variety of sizes that fit their motherboards and SSDs without thread or wobble issues. A recurring theme is that having spare hardware on hand is more time-saving than hunting for individual screws. Review evidence also mentions the usefulness of washers for stabilizing an SSD in certain laptop configurations.
What’s included in this M.2 screw kit
This kit is intended to cover common M.2 NVMe mounting needs. It includes a mix of screws, standoffs, and washers, plus a small magnetic screwdriver for the tiny fasteners. The assortment is built around different hex jack screw configurations and flat head screw options, along with corresponding washers, so you can select hardware that matches your slot and drive form factor requirements.
Pros and cons for real-world use
Why people buy it
- Spare hardware for upgrades and repairs: If you are swapping an NVMe SSD or fixing an installation where the original screws are missing, having a kit like this can prevent downtime.
- Less fiddling with tiny screws: The included magnetic screwdriver is specifically meant to help you manage small fasteners during installation.
- More chances of the correct fit: With multiple standoff heights and screw sizes included, you are more likely to find the right combination for your specific motherboard or laptop slot.
Where buyers should be careful
- Standoff height matching matters: Even with a multi-size kit, you still need to choose the correct standoff height for your SSD and slot so the drive sits properly.
- Tightening small screws needs patience: The hardware is small, so proceed carefully to avoid stripping or cross-threading while aligning the SSD.
Compatibility: what it is designed to work with
The kit is positioned for M.2 NVMe SSD mounting on compatible PC and laptop motherboards, and it is also described as applicable to NGFF-style mounting. It is intended for use with many widely used NVMe SSD families and is commonly used for DIY builds, personal computer maintenance, and SSD installation where replacement screws and standoffs are required.
Best practice before buying: Confirm your motherboard or laptop M.2 slot mounting requirements (standoff height, screw type, and whether washers are used) so you can select the right parts from the kit during installation.
Is it worth it? (who should buy)
This kit is most worth it if you:
- Often upgrade PCs or laptops and want a small hardware stash for future SSD installs
- Have run into missing, damaged, or mismatched M.2 screws and standoffs
- Prefer an all-in-one kit (screws, standoffs, washers, and a magnetic screwdriver) instead of buying single screws
It is less ideal if you:
- Only need a single screw size with no backup plans, since a kit can include more hardware than you immediately require
- Are not comfortable matching standoff heights and screw types to your exact hardware configuration
Alternatives to consider
If you want a different approach than a multi-size screw-and-standoff kit, consider these options based on your situation:
- OEM or device-specific replacement hardware: Best when you want guaranteed exact match for a particular laptop model or motherboard, but it can be slower or more expensive to source.
- Single-size screw replacement packs: Good for one-off repairs when you already know the exact screw and standoff height you need.
- Third-party M.2 mounting kits with fewer pieces: These can work if your target hardware is within a narrow size range, but they may be less forgiving if you discover you need a different standoff height.
Price and availability
Pricing can vary, so check the current listing for the most up-to-date cost and stock status. Since this is a low-cost accessory, the value usually comes from having the right parts on hand for future SSD work, not from headline features.
Bottom line
The 46-piece M.2 NVMe screw and standoff kit is a practical “missing hardware” solution for SSD installs, especially when you want spare screws, washers, and standoffs in one place. Its magnetic screwdriver and variety of included parts are the main reasons it works well for builders and upgraders, as long as you take a moment to select the correct standoff height and screw combination for your specific setup.
FAQ
What size M.2 screws and standoffs are included?
The kit includes multiple screw and standoff options designed for M.2 mounting, including different flat head screws and several standoff configurations (with washers included for corresponding screw types).
Does this kit work for NVMe SSDs (PCIe) and not just SATA M.2?
It is intended for M.2 NVMe SSD mounting hardware, and it is commonly used for securing NVMe drives in M.2 slots that support NVMe.
Do I need washers for my M.2 SSD?
Some laptop and mounting setups use washers to help the SSD sit firmly with less wiggle. If your device originally used washers, this kit includes washer options to match common screw types.
Will the standoff height matter for installation?
Yes. Even with a multi-size kit, you should choose the standoff height that matches your motherboard or laptop’s M.2 mounting position so the SSD sits correctly.
What’s the magnetic screwdriver for?
The magnetic screwdriver is included to help hold and position tiny screws during installation, making it easier to thread small fasteners without dropping them.
Is this worth buying if I only need one screw?
If you already know the exact screw and standoff you need, a single-size replacement might be cheaper. But if you want spare parts for future upgrades or repairs, the multi-size kit is usually more convenient.
Specifications
| Product Title | 46PCS NVME M.2 SSD Mounting Screws M.2 SSD Screw Kit for Asus Gigabyte ASRock Msi Motherboards |
|---|---|
| Category | Electronics > Computers & Accessories > Computer Components > Computer Screws |
| Brand | Scartink |
| Manufacturer | Scartink |
| Color | black |
| Item Dimensions | 2.7 x 4 x 0.3 inches |
| Thread Size | 7 millimetre |
| Thread Coverage | Partially Threaded |
| Fastener Size | M2*6, M3*6 |
| Size Name | M2*6, M3*6 |
| Compatible Groove Diameter | 2 Millimeters |
| Number of Pieces | 46 |
| Fastener Type | Screw |
| UPC | 750250590867 |
| Set Name | 46-Piece M.2 SSD Mounting Screw Kit |
| Number Of Items | 46 |
| Part Number | NMWQ4 |
| Unit Count | 46.0 Count |
| Screw Head Style | Flat |
| Screw Point Style | Flat Point |
| Head Type | Flat |
| Thread Type | Metric |
| Set Screw Thread Type | Metric |
| Thread Style | Right Hand |
| Thread Class | 3A |
| Grade Rating | Premium |
| Drive System | Phillips |
Recommended next
M.2 Screws, Motherboard Screw for Asus Gigabyte Asrock MSI Motherboards, Computer Screws for HDD, SSD, Fan, Power Supply, PC Case - PC Screws, M.2 Standoff and Screw
A 75-piece M.2 screw and standoff kit designed to help you mount NVMe/SSD drives and handle common PC screw needs across ASUS, MSI, Gigabyte, and ASRock builds. Buyers like the wide variety, secure fit, and “emergency stash” value, with the main caveat that there are many pieces to sort if you are new to PC building.
m2 2280ssd Screws Kit,PCIe NVMe M.2 SSD Mounting Screws
This M.2 2280 (NGFF/PCIe NVMe) mounting screw kit is a budget-friendly way to replace missing screws or stock up before an SSD install. It includes 16 flat-head screws and a small screwdriver, with reports of a snug, no-wobble fit for common 2280 NVMe SSDs.
Bemaka 360Pcs Laptop Screws Notebook Computer Tiny Screw Kit (12 Sizes M2/M2.5/M3)
Bemaka’s 360-piece laptop screw kit is designed for people who do laptop repairs, upgrades, or DIY builds and want the right tiny fasteners on hand. The set includes 12 sizes (with an emphasis on M2, M2.5, and M3) and comes in a labeled plastic box for easier sorting, with buyer feedback pointing to good fit and helpful variety.
400PCS Computer Screws Motherboard Standoffs Assortment Kit for Universal Motherboard
A 400-piece assortment kit aimed at DIY PC builds and repairs, covering common screws and standoffs for motherboard, SSD/HDD, fans, power supplies, and case work. It’s valued for having the right parts on hand and keeping them organized, with one recurring tradeoff: go easy on torque to help avoid stripping on smaller screws.