10Pack 10GBase-SR SFP+ Module, Multi-Mode LC Ethernet Transceiver (850nm, up to 400m)
Quick take
This 10-pack of 10GBase-SR SFP+ transceivers is meant for short-reach 10GbE fiber networking over multi-mode LC connectors, targeting up to 400m at 850nm. It aims at wide compatibility with common network equipment and supports hot-plug plus Digital Diagnostic Monitoring (DDM). The main buying caveat is fit, which depends on your switch/NIC support and the multi-mode fiber type in your existing link.
Pros and cons
Pros
- 10Gbps 850nm multi-mode operation for short fiber runs (rated up to 400m).
- LC/UPC duplex fiber interface, intended to work with common OM1 through OM4 multi-mode cabling.
- Hot-pluggable SFP+ use with DDM for real-time link monitoring.
- Backed by a 3-year warranty and lifetime technical support.
Cons
- Compatibility can vary across SFP+ ports and certain network cards, so it is smart to verify your specific device support.
- It is for multi-mode (not long-reach single-mode), so distance and performance depend on the fiber plant and link loss.
What buyers think
Buyer-review evidence points mainly to dependable basic operation and ease of use. Multiple buyers mention quick recognition in switches and working as intended for 10GbE connectivity, describing setup as effectively plug-and-play in their use cases. Some feedback also highlights that these modules tend to work broadly across different switches and network gear. A small amount of evidence suggests that a minority of pairings, such as certain network cards or OS combinations, may not recognize the module, but overall the recurring theme is compatibility that is good for typical SFP+ 10GbE deployments.
Who this is for
This is a strong option if you are building or upgrading a 10GbE network that uses fiber for short to medium distances, such as connecting:
- 10GbE switches to each other (or to other fiber-enabled switches)
- 10GbE NICs to a fiber switch in a data-heavy workstation or server setup
- NAS or SAN environments that want faster storage networking than 1GbE
- Home labs where copper length is becoming a bottleneck
Key specs that matter in real-world buying
Reach and fiber type
This module is designed for 10GBase-SR at 850nm over multi-mode fiber, with a stated maximum reach of up to 400m using appropriate multi-mode cabling. It supports common multi-mode fiber types including OM1, OM2, OM3, and OM4, which can help when you are standardizing across a mixed cabling environment. If your links are longer than your multi-mode run can support, you will need a different transceiver class.
Connector and form factor
It uses an LC/UPC duplex connection and the standard SFP+ form factor. That makes it a fit for equipment with SFP+ cage ports that expect LC multi-mode transceivers.
DDM and hot-plug behavior
Support for Digital Diagnostic Monitoring (DDM) can be useful if you want visibility into link health and diagnostics through your switch or management interface. The module is hot-pluggable, which generally makes replacement or upgrades simpler without needing to power down the entire switch.
Power and design considerations
Power draw is listed under 1.05W, and it is described as low EMI with ESD protection. In practice, those details matter for stable operation in dense racks and for minimizing interference risk, especially when you are installing multiple modules together.
Compatibility notes (how to avoid a mismatch)
Compatibility is a top concern with third-party or open-ecosystem optics. This SFP+ transceiver is intended to be MSA-compliant (including SFF-8432 and SFF-8431 electrical/mechanical expectations) and is commonly used in mixed-vendor network gear. That said, buyer feedback suggests that some less common combinations, such as certain NICs paired with certain operating systems, may fail to recognize a module.
To reduce the chance of a mismatch, confirm:
- Your switch and/or NIC explicitly supports 10GBase-SR SFP+ with multi-mode LC optics.
- Your installed cabling is multi-mode (and the actual OM rating fits your link requirements).
- Your SFP+ port is not limited to a narrower set of optic types than you expect.
Pros and cons summary
Buy it if you need a multi-mode 10GBase-SR SFP+ transceiver for LC fiber runs up to the stated limit, and you want a multi-pack quantity to populate multiple ports. Skip it (or look for a different optic type) if your infrastructure is single-mode or your distances exceed what multi-mode 850nm optics can support, or if your specific NIC model is known to be picky about third-party transceivers.
Verdict
The overall buying signal is positive for a straightforward 10GbE fiber upgrade: easy installation, recognition in many common switch environments, and stable connectivity for typical short-reach multi-mode links. The key decision factor is not the transceiver alone, it is the match between your equipment’s SFP+ expectations and your fiber type and distance requirements. If those align, this 10-pack format can be an efficient way to stock up for a small network rollout or lab expansion.
FAQ
Is this a single-mode or multi-mode SFP+ transceiver?
It is a multi-mode SFP+ transceiver intended for 10GBase-SR operation using 850nm over multi-mode LC cabling (rated up to 400m with appropriate fiber).
What fiber connector does it use?
It uses an LC/UPC duplex connector.
How far can it run at 10GbE?
The stated maximum reach is up to 400m over multi-mode fiber when using appropriate cabling and link conditions.
Does it support DDM?
Yes, it includes Digital Diagnostic Monitoring (DDM) support for link diagnostics.
Will it work with Cisco, Meraki, Ubiquiti, and other network gear?
It is designed for broad compatibility with many SFP+ 10GbE environments and MSA expectations, and it is commonly considered for cross-brand setups. Still, your specific switch or NIC model may have recognition differences, so it is wise to verify device support for 10GBase-SR multi-mode optics.
Specifications
| Product Title | 10Pack 10GBase-SR SFP+ Module, Multi-Mode LC Ethernet Transceiver, 10G 850nm MMF up to 400m, Compatible with Cisco SFP-10G-SR, Meraki, Ubiquiti UF-MM-10G, Mikrotik, Netgear, TP-Link, Aruba and More |
|---|---|
| Category | Electronics > Computers & Accessories > Networking Products > Network Transceivers |
| Manufacturer | FTTPVIPS |
| Item Weight | 8.4 ounces |
| Package Dimensions | 7.48 x 5.12 x 1.3 inches |
Available variants
Color
- 4PCS 10G SFP to LC MultiMode
- 10PCS 10G SFP to LC MultiMode
- 2PCS 10G SFP to LC MultiMode
- 1PCS 10G SFP to LC MultiMode
Recommended next
10Gtek 10GBase-T SFP+ to RJ-45 Transceiver (CAT.6a/CAT7, up to 30m)
10Gtek’s 10GBase-T SFP+ to RJ-45 transceiver is a plug-and-play option for running 10GbE over copper using CAT.6a or better, up to about 30 meters. It’s commonly chosen for home labs and small business setups when you need flexibility with SFP+ switch ports, with strong compatibility across many mainstream networking brands (and clear exceptions).
1.25/2.5/5/10G-T SFP+ to RJ45 Transceiver, Copper Ethernet Module Compatible for review
A copper 10G SFP+ transceiver that converts an SFP+ slot to an RJ45 port, supporting speeds down to 1.25G and reaching up to 30m on Cat. 6a/7. It’s a good fit for Unifi, Mikrotik, and certain 10GbE switches, but it can run warm, so consider cooling if you’re installing it in a tight cabinet.
ELECROW Meshtastic LoRa Transceiver with GPS and nRF52840 (ThinkNode M1)
The ELECROW ThinkNode M1 is a compact Meshtastic LoRa transceiver with a built-in GPS (GPS, GLONASS, BeiDou, QZSS) and a sun-readable 1.54-inch E-ink display. Buyers highlight easy Bluetooth setup, strong day visibility, and battery life around 48 hours, with a few caveats around firmware quirks and antenna connection when upgrading.
A Pair of 1.25G/s Bidi Gigabit Multi-Mode Fiber Ethernet Media Converter with 2PCS Bidi SFP LC Dual Transceiver Module Included
A compact, plug-and-play pair of gigabit fiber media converters designed to bridge RJ45 copper to a multi-mode SFP fiber link (up to 550 m with the included transceivers). Buyers typically like the easy setup and day-to-day reliability, with the main caveat being that DOA units have been reported, so it is smart to test on arrival.