1.25/2.5/5/10G-T SFP+ to RJ45 Transceiver, Copper Ethernet Module
Quick take
This SFP+ to RJ45 copper module is designed to turn an SFP+ port into a multi-speed 10GbE-compatible RJ45 connection, with support for 10G, 5G, 2.5G, and 1.25G over copper. Buyers commonly use it in home labs and Unifi or similar setups, but the main tradeoff is that it can run warm in normal operation, so airflow matters in enclosed racks.
Pros and cons
Pros
- Supports multiple copper Ethernet speeds (10G, 5G, 2.5G, 1.25G) from the same module.
- Works as a hot-pluggable SFP+ copper solution, making it practical for switching setups.
- Reported to deliver reliable higher-speed connectivity in home lab and Unifi-style environments.
Cons
- Runs warm during use, and heat management (airflow or extra cooling) may be important in tight cabinets.
- Compatibility is not universal, and it is not intended for all Cisco lines (and you should confirm exact switch support).
- Available evidence is mixed on long-term reliability, with at least some buyers reporting early failure.
What buyers think
Buyer-review evidence points to two consistent themes. First, the module is often described as performing the intended role, with users seeing stable 10GbE (or the negotiated speed) in Unifi and home-lab style deployments. Second, multiple buyers note that the transceiver tends to run warm, even when overall networking performance remains fine. Beyond that, evidence on long-term durability is mixed, including reports of at least one early failure, so it is worth considering cooling and doing compatibility checks for your specific switch.
Who this transceiver is for
This is a good match if you want an RJ45 copper port but your switch or appliance only has SFP+ slots. It is particularly relevant for builders of 10GbE home networks who need a flexible speed range (10G down to 2.5G and 1.25G) and plan to run copper using Cat. 6a or Cat. 7 cabling for up to 30m.
Key specs that matter for buying
- Connector types: SFP+ on the switch side, RJ45 on the network side.
- Supported link speeds: 10G, 5G, 2.5G, and 1.25G.
- Copper reach: up to 30m using Cat. 6a/7.
- Operating temperature: 0–70°C, with heat generation described as normal due to the internal chip.
Compatibility notes to check before you buy
This module targets 10G SFP+ copper use and is listed as compatible with specific 10GbE gear such as Cisco SFP-10G-T-S (with an important limitation), MikroTik S+RJ10, Ubiquiti UF-RJ45-10G, Netgear AXM765, D-Link DEM-440XT, Supermicro, Mikrotik, and Fortinet. It also includes a notable caution: it is not intended to work with Cisco Nexus Series or Cisco Meraki Series.
Because SFP+ transceiver compatibility can be picky by platform and firmware, it is smart to verify that your exact switch model supports this type of copper RJ45 SFP+ module (especially if you are using a less common brand or a managed enterprise platform).
Heat and cooling considerations
Warm operation is one of the most practical day-to-day factors with copper SFP+ modules. The product guidance acknowledges that heat generation can occur and recommends placing the module in a cooler environment or adding airflow if significant heat is produced. In practice, buyers describe the module as running warm while still maintaining connectivity. If you are installing it in a stacked switch, a closed cabinet, or a densely populated rack, plan for airflow or consider supplemental cooling to reduce heat buildup.
Pros and cons (real-world fit)
When it’s a smart pick
- You need an SFP+ to RJ45 copper conversion without switching to fiber.
- You have Cat. 6a/7 runs and want 10G-class speeds over short distances (up to the stated 30m).
- You value a module that can negotiate down to 5G, 2.5G, or 1.25G for flexibility.
When you should think twice
- Your installation has poor airflow or tight spacing, and you cannot add cooling.
- You cannot confirm exact switch compatibility (especially if you are using Cisco Nexus/Meraki lines).
- You’re looking for the most proven long-term track record, since evidence includes at least one report of early failure.
Verdict
The 1.25/2.5/5/10G-T SFP+ to RJ45 copper module is a practical way to add RJ45 connectivity to an SFP+ network port, with speeds that scale from 10G down to 1.25G and a stated copper reach of up to 30m on Cat. 6a/7. If your switch is compatible and you can manage heat with adequate airflow, it can work well for home labs and similar setups. Just be sure to validate compatibility and plan for warming in enclosed rack environments.
FAQs
What speeds does this SFP+ to RJ45 module support?
It supports 10G, 5G, 2.5G, and 1.25G Ethernet over copper, depending on your switch negotiation and cabling.
How far can it run on copper?
It is rated for up to 30m using Cat. 6a or Cat. 7 cable.
Will it work with Cisco Nexus or Cisco Meraki switches?
It is not supported for Cisco Nexus Series or Cisco Meraki Series, so you should confirm compatibility with your exact model before purchasing.
Does the module get hot?
Heat generation is described as normal, and buyers commonly report it runs warm. If you install it in a closed cabinet or a high-heat environment, additional airflow or cooling can be important.
Is it plug and play?
It is described as hot-pluggable, so you can insert and remove it with the switch running (as supported by your network equipment).
Is it a good choice for a Unifi setup?
There are buyer reports of successful operation in Unifi environments, including using it to get beyond 1GbE limitations. Still, it’s best to confirm your specific Unifi hardware and port type compatibility.
Specifications
| Product Title | 1.25/2.5/5/10G-T SFP+ to RJ45 Transceiver, Copper Ethernet Module Compatible for Cisco SFP-10G-T-S, MikroTik S+RJ10, Ubiquiti UF-RJ45-10G, Netgear AXM765, Netgear, TP-Link, Fortinet, 30m,1 PCS |
|---|---|
| Category | Electronics > Computers & Accessories > Networking Products > Network Transceivers |
| Manufacturer | QINIYEK |
| Item Weight | 1.44 ounces |
| Product Dimensions | 3.94 x 1.77 x 0.71 inches |
Available variants
Capacity
- 10GBase-LR: 10km x1
- 1.25/2.5/5/10GBase-T: 30m x10
- 10GBase-T: 30m x1
- 1.25/2.5/5/10GBase-T: 30m x4
- 10GBase-T: 30m x4
- 1.25/2.5/5/10GBase-T: 30m x1
- 10GBase-SR: 300m x1
- 10GBase-T: 30m x2
- 10GBase-ER: 10km x1
- 10GBase-T: 30m x10
- 1.25/2.5/5/10GBase-T: 30m x2
Color
- For Arista
- For Cisco
- For Intel
- For Netgear
- For Ubiquiti
- For Juniper
- For HP
Recommended next
10Gtek 10GBase-T SFP+ to RJ-45 Transceiver (CAT.6a/CAT7, up to 30m)
10Gtek’s 10GBase-T SFP+ to RJ-45 transceiver is a plug-and-play option for running 10GbE over copper using CAT.6a or better, up to about 30 meters. It’s commonly chosen for home labs and small business setups when you need flexibility with SFP+ switch ports, with strong compatibility across many mainstream networking brands (and clear exceptions).
ELECROW Meshtastic LoRa Transceiver with GPS and nRF52840 (ThinkNode M1)
The ELECROW ThinkNode M1 is a compact Meshtastic LoRa transceiver with a built-in GPS (GPS, GLONASS, BeiDou, QZSS) and a sun-readable 1.54-inch E-ink display. Buyers highlight easy Bluetooth setup, strong day visibility, and battery life around 48 hours, with a few caveats around firmware quirks and antenna connection when upgrading.
10Gtek 𝟭.𝟮𝟱/𝟮.𝟱/𝟱/𝟭𝟬𝗚-T SFP+ to RJ45 CAT.6a Copper Transceiver
The 10Gtek 10GBase-T SFP+ to RJ45 copper transceiver is built for switches or NICs that accept SFP+ modules and you want multi-rate Ethernet over CAT.6a/CAT7. It supports auto-negotiation across 1.25G, 2.5G, 5G, and 10G, with up to 30 meters over copper, and is aimed at compatibility with many common networking vendors. The main buying caveat is that not every brand’s switch or ecosystem supports every SFP+ copper option the same way, so double-check compatibility before buying.
10GBASE-T SFP+ to RJ45 Transceiver, 1/2.5/5/10G Multi-Rate Copper SFP+ to Ethernet Module (XZSNET)
A copper SFP+ (10GBASE-T) to RJ45 module for switching gear that uses open SFP+ cages. It supports multi-rate auto-negotiation (1G/2.5G/5G/10G) over CAT6a/CAT7 up to 30m, with hot-plug support. Buyer reviews are mixed: many report smooth setup and stable multigig speeds, while a smaller set report early failures, suggesting it may be more sensitive to cooling and power conditions than some users expect.