10Gtek 10GBase-T SFP+ to RJ-45 Transceiver (CAT.6a/CAT7, up to 30m)
Quick take
This 10Gtek SFP+ module converts an SFP+ port into an RJ-45 10GbE connection over copper. It is designed for short runs, up to about 30 meters, using CAT.6a or CAT7 cabling, and it targets users who want plug-and-play flexibility in home labs and small office networks.
The main thing to double-check is compatibility with your specific switch or device model, since some major platforms are explicitly not supported.
Pros and cons
Pros
- Supports 10GbE over RJ-45 (CAT.6a/CAT7), with reach up to about 30 meters.
- Broad compatibility across many mainstream networking brands, including Cisco and Meraki (with listed exceptions).
- Metal housing for heat dissipation, plus features like a shielded RJ45 port.
- Hot-swappable support and thick, plated connector contacts for stability.
Cons
- Not compatible with several well-known platforms, so device matching matters.
- Works best when your cabling is genuinely CAT.6a or better for the intended distance.
- One recurring caution in user feedback is that it can run hot, so plan ventilation around your switch.
What buyers think
Buyer-review evidence points to a consistent theme: the module generally performs as expected for 10GbE when paired with appropriate 10GbE-capable hardware and proper multimode link setups in the broader family of network modules. In this specific RJ-45 copper use case, users frequently describe it as plug-and-play with their SFP+ switch ports, with no speed problems when installed correctly.
There is also positive feedback around physical build (metal casing) and usability (easy insertion, straightforward operation). The clearest downside theme is heat, with some users noting it runs hot, which can be a consideration in tightly packed switch environments.
Overall, buyer-review evidence is strongest for reliability in everyday operation and straightforward setup, with compatibility remaining the biggest practical variable depending on the exact switch or NIC model.
Key features and what they mean for your network
10GbE over copper using an SFP+ port
This transceiver turns an SFP+ interface into an RJ-45 10GbE connection. That’s useful when you have a switch (or NIC) with SFP+ slots but you want to use copper instead of fiber for short to mid-distance runs.
Reach: up to about 30 meters
The stated cable reach is up to 30 meters when using CAT.6a or CAT7 (or better). In practice, this kind of distance depends on cable quality, termination, and how consistently the run meets CAT.6a/CAT7 spec.
Compatibility coverage (and notable exclusions)
It is marketed for wide compatibility with many popular networking ecosystems (including Cisco, Fortinet, Meraki, and several other switch and security vendors). At the same time, it is explicitly not compatible with certain platforms (a list is provided by the manufacturer) and you should also confirm your exact device model before purchasing.
If you are integrating Ubiquiti hardware, the manufacturer recommends a specific related transceiver for those devices. That is a good sign to treat brand-family matching as a real buying step, not an afterthought.
Pros and cons in real-world terms
When this transceiver is a good fit
- You want 10GbE copper links from an SFP+ switch port, for short runs where fiber is unnecessary.
- Your environment has CAT.6a or CAT7 cabling ready, and you are targeting up to roughly 30 meters.
- You prefer plug-and-play behavior and want a third-party module option for common networking brands.
- You care about sturdy physical design, including metal shielding for heat dissipation and reduced interference.
When you should look elsewhere
- Your switch or NIC model is on the explicit “not compatible” list, or you cannot verify support for your exact hardware.
- You need longer copper reach than what is supported here, or you plan to run beyond typical CAT.6a performance expectations.
- Your switch is in a cramped rack with limited airflow, and you are sensitive to modules that may run hot. If so, check ventilation and port spacing.
Buying guide: how to choose the right 10GbE transceiver
1) Match the connector type to your port
Make sure you are using the correct SFP+ copper module type for an RJ-45 10GbE connection. If your goal is fiber, you will want an SFP+ fiber transceiver instead.
2) Validate cable category and install quality
For up to about 30 meters, CAT.6a or CAT7 is the key spec. If there are any doubts about the cable rating, re-termination quality, or cable management, that is a risk area.
3) Confirm hardware compatibility before ordering
Transceivers often work broadly, but compatibility is not universal across vendor lines. Use the manufacturer’s supported and unsupported platform lists as your primary checklist.
4) Consider thermal conditions
Because some users note it runs hot, think about airflow around your switch and how densely your rack is populated. A little planning here can prevent long-term nuisance problems like throttling or thermal stress.
Verdict
The 10Gtek 10GBase-T SFP+ to RJ-45 transceiver is a practical option for building or expanding a 10GbE copper network over short runs, especially when you want RJ-45 convenience but still need to use SFP+ ports. It earns its place for its metal build, plug-and-play behavior reported by buyers, and support for many mainstream networking ecosystems, as long as you verify compatibility and you have CAT.6a/CAT7 cabling that can reliably reach the stated distance.
FAQs
Is the 10Gtek 10GBase-T SFP+ to RJ-45 transceiver limited to 30 meters?
It is specified for up to about 30 meters using CAT.6a/CAT7 (or better). Going farther than that is not what it is designed for, and performance will depend on cable quality and installation.
What cable type do I need for this module?
You should use CAT.6a or CAT7 (or better) cabling for the supported 10GbE reach over RJ-45.
Will it work with cisco, meraki, or fortinet?
It is marketed for broad compatibility across several major platforms, including Cisco and Meraki, but it also lists specific exclusions. The safest approach is to confirm your exact device model against the compatibility guidance.
Does it run hot?
Some buyers report that the module runs quite hot. If your switch or rack has limited airflow, give extra attention to ventilation and port spacing.
Is it plug-and-play?
Buyer feedback commonly describes it as working as expected with supported hardware, with a plug-and-play experience. Still, compatibility varies by exact device model, so verification matters.
Specifications
| Product Title | 10Gtek 𝟭𝟬𝗚𝗕𝗮𝘀𝗲-𝗧 𝗦𝗙𝗣+ 𝘁𝗼 𝗥𝗝-𝟰𝟱 𝗧𝗿𝗮𝗻𝘀𝗰𝗲𝗶𝘃𝗲𝗿, 10Gbe SFP+ Copper Ethernet CAT.6a Module, up to 30-Meter, for Cisco SFP-10G-T-S, Meraki, Fortinet, Pack of 4 |
|---|---|
| Category | Electronics > Computers & Accessories > Networking Products > Network Transceivers |
| Manufacturer | 10Gtek |
| Item Weight | 5.6 ounces |
| Package Dimensions | 4.65 x 3.39 x 0.75 inches |
Available variants
Size
- 6) 10G-LR: 10km
- 5) 10G-IR: 2km
- 11) 10G-Bidi: 40km
- 7) Ind. Grade: 10km(-40°C ~ 85°C)
- 1) 10G-T: 30m
- 4) 10G-LRM: 220m
- 3) Ind. Grade: 300m(-40°C ~ 85°C)
- 2) 10G-SR: 300m
- 9) 10G-ZR: 80km
- 10) 10G-Bidi: 20km
- 8) 10G-ER: 40km
Number Of Items
- 8
- 2
- 1
- 4
- 10
Recommended next
4 Pack 1.25G 850nm Multimode SFP LC Transceiver Fiber Module
A 4-pack of OM3 850nm multimode SFP (1.25Gb/s) LC transceivers rated for up to 550 meters on 1000BASE-SX links, with DDM for monitoring and a hot-swappable design. Best for buyers replacing or stocking 1G SFP multimode optics for Cisco, Meraki, Ubiquiti UniFi, Mikrotik, and other SFP cage equipment that supports MSA-compliant optics, with the main caveat being strict compatibility with the switch and the multimode fiber distance budget.
1000BASE-T SFP Transceiver, SFP to RJ45, 1.25G Copper SFP to Ethernet Module
A gigabit copper SFP (1000BASE-T) that turns an SFP slot into an RJ45 Ethernet port. Best for buyers who need a cost-effective fiber-to-copper style uplink using Cat5e/Cat6 (up to 100m), but compatibility with your exact switch matters, and it is not meant for HP/HPE models.
A Pair of Gigabit Single Mode LC Fiber Media Converter, with 2 Pcs SFP LX Modules, 1.25G/s Fiber to Ethernet Converter, 1000Base-LX to 10/100/1000base-TX, SFP to RJ45, SMF, 1310nm, up to 20km
A two-pack gigabit media converter kit that bridges 1000Base-T RJ45 Ethernet to single-mode fiber (1000Base-LX) using LC connectors and 1310nm SFP LX modules. It’s designed for plug-and-play expansion of existing gigabit Ethernet runs, with jumbo frame support and status LEDs for quick link visibility. The main caveat is that fiber distance and link behavior depend on matching fiber type and the single-mode SFP/LX setup you’re using.
4PCS 1000BASE-T Gigabit SFP to RJ45 Copper Ethernet Modular Transceiver
This 4-pack of 1000BASE-T SFP to RJ45 copper transceivers is built to convert an SFP slot into a standard gigabit Ethernet RJ45 port for Cat5e or Cat6 cabling. It’s a practical option for network gear with “open” SFP compatibility, with plug-and-play installation in many setups, but you should verify your switch’s third-party SFP compatibility before buying.