ZTR for iPad Air 4 4th Gen (2020) 10.9” Screen Replacement LCD Display for A2324 A2316 A2325 A2072
Quick take
This ZTR replacement kit is designed for the 10.9-inch iPad Air 4 (2020) models A2072, A2316, A2324, and A2325, and includes a full LCD plus touch digitizer assembly and repair tools. It is a good fit for DIYers who are comfortable with careful glass work and connector alignment. The main buying caveat is installation risk, because damaged screens or missteps during fitting can prevent the part from functioning normally.
Pros and cons
Pros
- Made for iPad Air 4 (2020) 10.9-inch models A2072, A2316, A2324, and A2325, so you do not have to guess compatibility.
- Full assembly approach (LCD display plus touch digitizer) for screen and touch replacement in one kit.
- Includes practical install tools like suction cup, pry tools, scraper, and opening tools, plus screw handle and bits.
- Buyers report good fit and that it worked on first install when handled carefully.
Cons
- Not recommended for inexperienced users, installation requires careful handling and proper connector seating.
- Quality depends heavily on installation, since at least some negative outcomes appear tied to damage during fitting.
- Because it is a glass-based screen assembly, there is always a break risk during removal and installation.
What buyers think
Buyer-review evidence is limited but consistent in a few decision-relevant areas. Positive feedback focuses on compatibility and fit, with some buyers stating the screen fit properly and worked quickly after installation. Buyers also mention superior or excellent quality in brief terms. On the downside, there are reports of failure soon after installation, and one concern suggests the issue may be related to how the screen sat in the chassis or how the install process went. Overall, the available feedback points more to install experience and careful handling than to an obvious product-wide defect pattern.
What this replacement kit includes
Instead of selling only a bare panel, this is a full LCD and touch digitizer assembly designed to replace the screen portion of the iPad Air 4. The kit includes common repair tools to help you get the job done, including a suction cup, pry bar, metal scraper, triangle opening tools, and card pin. It also includes a screw handle and screwdriver bits for disassembly and reassembly.
Compatibility: which iPad Air 4 models it fits
This LCD and touch digitizer kit is built for iPad Air 4 (4th generation, 2020) with a 10.9-inch screen. It lists compatibility with model numbers A2072, A2316, A2324, and A2325. Before ordering, confirm your iPad’s model so you do not buy the wrong 10.9-inch variant.
Installation reality check (DIYers need to be prepared)
If you have not repaired tablets before, this is one of those parts where “close enough” can lead to trouble. The kit emphasizes watching installation videos and having experience, and it also warns that damaging the screen during installation may fall outside what can be resolved after the fact. It also includes a practical reminder to disconnect power by removing the battery before installing and to test after the screen is properly connected. Because adhesives and glass are involved, plan for slow, careful work, and avoid rushing connector alignment.
Pros and cons in plain terms
Best for
- Owners of an iPad Air 4 (2020) 10.9-inch who need both display and touch replacement, not just a cosmetic swap.
- DIY repairers who are comfortable with careful disassembly, glass handling, and taking their time with connector placement.
- People who prefer a kit format that bundles an assembly plus common tools.
Who should consider a repair shop instead
- Anyone without tablet repair experience, especially if you are concerned about damaging connectors or glass during removal.
- Buyers looking for an easy upgrade rather than a replacement repair, because screen swaps are sensitive to technique.
Value considerations: does it make sense to buy this?
At the headline level, this is a full-screen replacement for a specific device generation, and buyers seem to reward that specificity with confident fit and quick operation after install when the process goes well. Where the value can slip is when install issues arise. If you already have the experience and tools to work carefully, a bundled kit can reduce friction. If you do not, a professional install may be the safer way to protect your time and avoid compounding damage.
Price and availability
It is currently listed as in stock, with a displayed price of $139.99. For the latest price changes and delivery details in your region, check the product listing.
FAQ
Is this compatible with iPad Air 4 10.9-inch (2020) models?
It is designed for the iPad Air 4 (4th generation, 2020) 10.9-inch, specifically model numbers A2072, A2316, A2324, and A2325. Verify your model number before purchasing.
Does this include the touch digitizer or only the LCD?
This is a full assembly approach, including the LCD display and the touch screen digitizer, so you can replace the display and touch together.
What tools come with the kit?
The kit includes a suction cup, pry bar, metal scraper, triangle opening tools, card pin, plus a screw handle and screwdriver bits.
Is it recommended for beginners?
Installation guidance discourages inexperienced DIY repairs. Screen replacements involve glass and careful connector work, so if you lack repair experience, a repair shop is a safer option.
What should I watch out for during installation?
Plan for careful disassembly, avoid damaging the glass, ensure connections are properly seated before powering on, and follow guidance related to battery removal and adhesive handling.
Will it work if I glue it into place?
The product notes indicate that if the screen is glued during installation, returns may not be accepted. Follow the recommended installation process instead of improvising with adhesive.
Specifications
| Product Title | ZTR for iPad Air 4 4th Gen (2020) 10.9” Screen Replacement LCD Display for A2324 A2316 A2325 A2072 Touch Screen Digitizer Full Assembly with Tools |
|---|---|
| Category | Electronics > Computers & Accessories > Tablet Replacement Parts > LCD Displays |
| Manufacturer | ZTR |
| Item Weight | 1.08 pounds |
| Product Dimensions | 0.08 x 7 x 9.75 inches |
| Item model number | IPA4B |
Recommended next
Mail-in Repair Service for iPad Pro 11 1st/2nd Gen Original OEM Screen Replacement Display Digitizer LCD Touch Assembly A1934 A1979 A1980 A2013/A2068 A2228 A2230 (Not DIY Kit)
If you cracked or damaged your iPad Pro 11 (1st or 2nd gen), this Lenwell mail-in service replaces the OEM screen assembly and returns your device with tracking. Expect a short turnaround after they receive your iPad, strong communication, and emphasis on keeping your data intact (no factory reset), with a key tradeoff: you cannot DIY this, you must ship your device.
![for iPad 10 (10th Generation) || iPad (A16) A2696 A2757 A3354 A3355 A2777 Screen Replacement Digitizer Touch Glass Kits, fit iPad 10th Gen (2022) 10.9 Inch || iPad A16 (2025) 11 inch, Full Repair Sets, [NO fit PRO/Air, Without LCD]](/product-images/019ed147-101e-7c75-8e2c-c5ce494cbfae-0-479f3a6a16e8.webp)
for iPad 10 (10th Generation) || iPad (A16) A2696 A2757 A3354 A3355 A2777 Screen Replacement Digitizer Touch Glass Kits, fit iPad 10th Gen (2022) 10.9 Inch || iPad A16 (2025) 11 inch, Full Repair Sets, [NO fit PRO/Air, Without LCD]
This GoodFixer digitizer touch glass kit is designed for the iPad 10 (10th gen, 2022) 10.9-inch model and the iPad A16 (2025) 11-inch model, sold as a screen replacement set for front-panel touch. It includes tools and a video-based install guide, but it does not include an LCD, so it is best for buyers whose display module is already intact.
for iPad 9 (2021) 10.2’’ Screen Replacement for iPad 9 LCD Display A2602 A2603 A2604 A2605 with Repair Kits (Black, Not Include Digitizer)
This SRJTEK replacement LCD screen kit is designed specifically for iPad 9 (2021) 10.2-inch models A2602, A2603, A2604, and A2605. It’s made for fixing display hardware issues like black screen, defective pixels, color problems, or backlight failures, and it includes a disassembly/opening kit. The biggest caveat: it does not include the digitizer/touch assembly, so touch-related problems may require a different part.
10.2" LCD Screen Replacement for iPad 9 (9th Gen) A2602 A2603 A2604 A2605 Display LCD Screen Replacement Premium Repair Kit
This iPad 9 (9th Gen) 10.2-inch LCD replacement kit is designed for A2602/A2603/A2604/A2605 models and comes with a tool set to help with a DIY swap. The biggest buying caveat is that it includes the LCD assembly only, not the glass touch digitizer, so display-touch performance depends on having the correct digitizer handling for your repair.