Wooden WiFi Router Storage Box (Deluxe, wall mountable, cable management)
Quick take
This Deluxe wooden router storage box is designed to hide a modem/router setup while keeping cables organized behind a painted pine front. It is a good match for buyers who want a more finished look than bare plastic gear, especially if your router equipment is relatively tall (up to 11 inches). The main tradeoff to consider is that the wood can feel brittle during screw-in assembly, so careful, slow installation matters.
Pros and cons
Pros
- Wall-mount router hider with cable management straps to help reduce messy cable visibility
- Deluxe interior height up to 11 inches, built to fit most consumer routers that are taller than typical enclosures
- Included installation items like a hanging template with level, screwdriver, and screw stickers for setup
- Buyers frequently mention a tidy, attractive wall look once installed
Cons
- Assembly can be tricky if you rush the screws, as some users report splitting or brittleness in the wood
- Not a plug-and-play cable fit guarantee, clearance still depends on your specific router/modem size and power cord thickness
What buyers think
Buyer-review evidence is fairly consistent on the “why it gets bought” reasons. Many people describe the unit as the right size for hiding and organizing router and internet equipment, noting a cleaner appearance and a more organized cable situation behind the cover. Setup is also commonly described as straightforward, with some reviewers calling out that assembly takes less time than expected.
On durability, feedback is positive in terms of the installed look and overall solidity, but there is a recurring assembly caution: the pine can be brittle when screws are driven, so going slowly helps prevent damage like splits. One additional pattern is that the interior height and space can work well for multiple pieces of network gear (for example, router plus modem or mesh equipment), with users appreciating the extra room for cables.
What this is, and why it’s useful
A wooden WiFi router storage box is a wall-mounted enclosure that gives your modem and router a “home” where they are less visually distracting. Instead of seeing a stack of plastic devices, you get a finished wood front and a more intentional look in living spaces. It also helps you keep cables routed in one area, which is especially useful when you want the system off the floor or out of the way.
This Deluxe version focuses on accommodating taller consumer routers, while still offering cable management straps to keep Ethernet and power cords from becoming a visible tangle.
Key features that affect real buying decisions
Fit for taller routers (up to 11 inches tall)
The Deluxe interior height is rated for routers up to about 11 inches tall. That matters if you have hardware that does not fit typical low-profile router covers. It can also be helpful if you need a bit of vertical clearance for space behind the front opening.
Cable management straps for cleaner routing
Hook-and-loop style fasteners are included so you can wrap cables where you want them. This is a practical feature for reducing visible clutter and keeping cords from hanging loose behind or in front of the equipment.
Wall-mount installation with a template
Installation is designed to be manageable, with a bubble level template and included hardware. Screw stickers and a screwdriver are also included, which can reduce the “missing one small thing” frustration during setup.
Material and finish
The enclosure is made from natural pine wood with a painted finish. Multiple finish color options are available, including black.
Pros and cons for the right buyer
Who it’s best for
- People who want a wall-mount router hider that looks more like home decor than exposed tech
- Buyers with routers around 11 inches tall who are tired of enclosures that are too short
- Anyone who values basic cable organization behind a single front panel
Who should avoid it (or double-check fit first)
- Shoppers who tend to assemble quickly without going slow, because users report the pine may split if screws are driven too fast
- Anyone whose specific modem/router setup includes unusually thick cables, bulky power adapters, or unique shapes, since clearance and cable routing can still vary by model
Size and compatibility notes
For the Deluxe model, the product dimensions are listed as 10.38"D x 16"W x 13.25"H externally, with 15" x 11" x 10" interior space. If your equipment is within the height requirement and you have room for cords to route behind the opening, it is more likely to fit well.
If you are unsure, measure the height of your tallest device and check your power adapter dimensions, not just the router footprint.
Installation tips to reduce the most common issue
Assembly feedback points to wood brittleness, so slow, careful installation helps. A few practical ways to minimize problems:
- Position and mark carefully using the template so screws go where they should.
- Drive screws slowly, letting the material seat rather than forcing it.
- Consider pre-starting holes lightly only if your tools and comfort level support it (avoid aggressive drilling that could worsen splitting).
If you want the wall look without troubleshooting assembly stress, plan a few extra minutes and take your time during the screw steps.
Verdict
The Wooden WiFi Router Storage Box (Deluxe) is a strong choice when you want your router and modem setup to look more integrated into your room. The standout reasons to buy are the taller interior height, the cable management straps, and the decor-focused wood finish that buyers often call attractive. Just go into assembly expecting you may need to work carefully with the pine so it does not split when screws are installed.
FAQs
What height of router does the Deluxe model fit?
The Deluxe storage box is designed to fit most consumer routers up to about 11 inches tall.
Does it include cable management for power and Ethernet?
Yes. It includes cable organization straps (hook-and-loop style) that can help secure both thicker power cords and thinner Ethernet cables.
Is the installation difficult?
Most buyers describe assembly as fairly manageable because it includes a mounting template with level and included hardware. The main caution is to install screws slowly to reduce the chance of splitting the pine wood.
Can I store a router plus additional network equipment inside?
It can work for multi-device setups as long as the combined equipment fits within the interior space and height limits and you can route the cables properly.
Is this meant for wall mounting only?
It is designed for wall mounting using screws. Some buyers also use the box as a shelf, but the intended installation method is wall mount.
Specifications
| Product Title | Wooden WiFi Router Storage Box - Deluxe Wall Mountable Decorative Modem Shelf Hider Cover with Cable Management System - Rustic Home Organization Solution for Most Routers Up to 11" Tall - Black |
|---|---|
| Category | Electronics > Computers & Accessories > Computer Accessories & Peripherals > Racks & Cabinets |
| Manufacturer | Gadget Garage |
| Model Name | DWRSCB |
| Model Number | DWRSCB |
| Item Weight | 3.4 Pounds |
| Product Dimensions | 10.38"D x 16"W x 13.25"H |
| Color | Black |
| Material | Pine |
| Size | Deluxe |
| Mounting Type | Screws |
| Room Type | Garage, Kitchen, Living Room, Media Room, Study Room |
| Shelf Type | Wood |
| Number Of Shelves | 1 |
| Additional Features | Space Saving, Cable Management, Easy Installation |
| Number of Items | 1 |
| Shape | Rectangular |
| Style Name | Modern |
| Finish Types | Painted |
| Item Dimensions D x W x H | 10.38"D x 16"W x 13.25"H |
| Shelf Thickness | 0.5 Inches |
| Item Dimensions | 10.38 x 16 x 13.25 inches |
| Brand Name | Gadget Garage |
| Included Components | Hanging Template with level, Hook & loop for wire managment, Paint safe tape to for template, Screw Driver, Screw Stickers |
| Global Trade Identification Number | 00860013645397 |
| Manufacturer Part Number | DWRSCDO |
| Age Range Description | N\A |
Available variants
Color
- Dark Oak
- Black
- Pine
- Espresso Brown
- White
Recommended next
NavePoint 22U Server Cabinet Wall Mount Rack Enclosure with Caster
The NavePoint 22U server cabinet is a steel, 22U rack enclosure built for 19-inch IT and A/V gear, with options for wall-mounting or floor use and mobility via caster wheels. Built-in fans and a lockable tempered glass door help with airflow and equipment security, but the included airflow can be loud, and you will want to plan for cable depth and grounding before assembly.
Hmseng adjustable PC tower stand for carpet (mobile cpu stand with 4 casters)
An adjustable, caster-based PC tower stand that lifts your desktop off carpet and floor, adds airflow at the base, and lets you roll your tower under a desk with two locking wheels. It’s a budget-friendly option for most case sizes, with the main tradeoff being mild wobble when extended to the widest setting.
NavePoint 15U Server Cabinet Wall Mount Rack Enclosure with Caster
A sturdy 15U network cabinet built for 19-inch rack gear, with a locking tempered-glass door, removable side panels, and built-in fans. Best for home labs and small IT installs that need a neat, secure enclosure, but it is a bit depth- and airflow-sensitive (the included fans can be loud).
StarTech.com 1U 4-Post Server Rack Shelf, Vented, Adjustable Mounting Depth (28-34.4in/71.1-87.3cm), 150lb (68kg) Capacity, Black
A vented, adjustable-depth 1U shelf designed for EIA-310-compliant 4-post 19-inch racks. It’s built from cold-rolled steel and supports up to 150 lb, making it a solid option for heavy network gear or for adding an install surface where 2-post or shallow mounting is tricky.