NavePoint 22U Server Cabinet Wall Mount Rack Enclosure with Caster
Quick take
This steel 22U rack enclosure is designed for 19-inch server, networking, and A/V equipment, with wall-mount or floor placement options plus caster wheels for easier positioning. Built-in fans and a locking tempered glass front door support both airflow and day-to-day monitoring, but fan noise can be significant and you should plan cable routing around the cabinet’s depth.
Pros and cons
Pros
- Cold-rolled steel cabinet with protective black powder coating, rated for up to 130 lbs (use total system weight as your limit).
- Flexible mounting options, wall-mount or free-standing, plus casters for mobility (casters add to overall height).
- Security and visibility with a reinforced, lockable tempered glass front door.
- Removable side panels for access, and built-in ventilation with two fans plus flow-through airflow.
- Assembly includes all necessary hardware, and the door direction can be adjusted with an L-shaped spring pin.
Cons
- Included fans can be loud, which may matter if the rack sits in a living space.
- Depth planning is critical, since you need room for devices and cabling (front door and patch/jumper clearance).
- Grounding guidance may be incomplete for some setups, so you may need extra parts or longer cabling for proper wiring.
- Door fit and alignment can require small adjustments during assembly (for some builds, lifting the door slightly helps close smoothly).
What buyers think
Buyer-review evidence for this cabinet is largely centered on build quality, assembly experience, and practical usability once equipment is installed. Multiple reviewers describe the enclosure as sturdy and “built like a tank,” and they generally report that assembly is straightforward when you take your time with frame/slot orientation and alignment. The glass front door is commonly cited as a good mix of security and visibility, and the removable side panels add convenience for maintenance. Ventilation is viewed as effective, but the included fans are also repeatedly described as powerful and loud, leading some buyers to swap fans or add fan control if they care about acoustics. A smaller but important theme is setup planning, including cable depth (jumper and clearance for front mounting posts and door closure) and grounding instructions that may not cover every real-world wiring scenario.
What this cabinet is for
The NavePoint 22U server cabinet wall-mount rack enclosure is a solution for installers and homelab users who need a protected home for 19-inch gear, such as servers, networking switches, patch panels, UPS units, and some A/V rack equipment. It provides a weather- and dust-resistant enclosure style (indoor-use rack cabinet), with a lockable tempered glass front for monitoring and side panels for deeper access.
Design and compatibility: 19-inch rack gear, 600mm depth
This is a 22U enclosure intended for 19-inch IT and A/V equipment installs. It is built with a 600mm depth (23.63-inch depth), which helps accommodate common network hardware and leaves room for standard cabling, but it is not “unlimited.” If your devices are deeper than expected or if you pack patch cords tightly at the front, you will want to measure clearance before committing.
For wall-mount or floor placement, it gives you a choice of installation style. The cabinet also includes caster wheels, which make it easier to roll the enclosure into position. Keep in mind that casters add 3 inches to the total height, which can affect mounting clearance on shelves, in closets, or under low ceilings.
Cooling and ventilation: effective airflow, but manage fan noise
Cooling is handled with built-in fans and flow-through ventilation meant to prevent overheating during normal operation. This is a meaningful feature if you are concentrating power and network hardware into one location.
However, several buyers report that the included fans are loud once running. If the cabinet will be in an office or living area, this is the biggest practical tradeoff to plan around. Some users address this by replacing the fans or using fan speed control. If your priority is quieter operation, treat the cooling system as something you may want to tune.
Security and day-to-day access
The locking tempered glass front door supports security while still letting you glance at LEDs and labels. The side panels are removable and also lockable, which can make maintenance easier when you need to reach ports, swap patching, or service power devices without fully disassembling the cabinet.
Door direction can be customized using an L-shaped spring pin, which helps if your installation layout needs the door to swing a particular way.
Assembly and setup considerations that matter
Most reviews describe the cabinet as relatively easy to assemble, but they also highlight a few points that can affect your success:
- Cable depth: you should not plan on using the full cabinet depth for device depth alone. Consider the space between the equipment’s front and the door, as well as jumper cable routing from patch panels to switches.
- Door alignment: some buyers mention minor door-to-frame contact at a corner, suggesting you may need careful screw tightening and final alignment adjustments.
Pros and cons summary
If you want a sturdy, secure 22U enclosure for 19-inch gear with solid access features, this cabinet delivers on materials, visibility, and overall practicality. The main “buyer should think twice” factors are acoustic comfort (fans can be loud) and the need for realistic cabling and grounding planning before you fully mount devices.
Who should buy it
- People building a centralized indoor rack for networking and IT equipment, where a lockable glass door and removable side panels are important.
- Installers or homelab users who want wall-mount or floor flexibility and appreciate caster mobility when relocating the rack.
- Buyers who can measure depth, plan cable routing, and are comfortable doing basic setup refinements like fan tuning if noise matters.
Who should avoid it
- Anyone who needs quiet operation out of the box, since included fans are commonly described as loud.
- Shoppers who want “plug-and-play” wiring with grounding and cabling that needs minimal planning, because setup success depends on clearance and correct wiring reach.
- Buyers with unusually deep equipment or tight front cable management plans, unless they are willing to verify jumper and door clearance.
Is it worth it?
The NavePoint 22U server cabinet is a strong value proposition for shoppers who prioritize build quality, security, and airflow for 19-inch rack equipment. It is likely the right choice if you can tolerate fan noise or are willing to adjust fan speeds, and if you plan cabling depth so the door and front-mounted items remain serviceable.
If you are comparing racks and cabinets, focus on three things: (1) the depth you truly need for your devices and jumper routes, (2) whether fan noise will be acceptable in your room, and (3) whether the cabinet’s wall-mount or floor-mount style matches your space constraints.
FAQ
What rack equipment size does this cabinet support?
It is designed for 19-inch IT and A/V equipment and provides 22U of rack space.
Is it wall-mountable or only floor-standing?
It supports both wall-mounted and floor-standing installation styles. It also includes caster wheels for easier movement.
How deep is the cabinet, and will my cables fit?
The cabinet’s depth is 600mm (23.63 inches). You should plan for device depth plus cable routing and clearance to ensure the front door can close properly.
Are the built-in fans quiet?
Some buyers report the included fans are loud and high-output. If noise is a priority, consider fan replacement or adding fan-speed control.
Does the cabinet come with removable side panels?
Yes. It includes removable, locking side panels to make access easier for installation and maintenance.
What should I know about grounding?
Grounding can depend on your specific wiring layout. Some buyers found that grounding reach or instructions were not sufficient for their setup, so you may need longer grounding wire.
What is the weight capacity?
The cabinet is rated for up to 130 lbs. Treat that as your maximum equipment load and account for the full installed system weight.
Specifications
| Product Title | NavePoint 22U Server Cabinet Wall Mount Rack Enclosure with Caster Wheels, 2 Fans, Locking Glass Door, Removable Side Panels – 22U Network Cabinet 23.6” Deep, 19” Server Rack for A/V Equipment |
|---|---|
| Category | Electronics > Computers & Accessories > Computer Accessories & Peripherals > Racks & Cabinets |
| Brand | NavePoint |
| Manufacturer | NavePoint |
| Model Number | 400478820 |
| Item Weight | 81.7 Pounds |
| Product Dimensions | 23.63"D x 23.63"W x 43"H |
| Color | Black |
| Material | Alloy Steel |
| Size | 22U - 600mm Depth |
| UPC | 813770022697 |
| Mfr Part Number | 400478820 |
| Unit Count | 1.0 Count |
| Is Assembly Required | Yes |
| Item Dimensions D x W x H | 23.63"D x 23.63"W x 43"H |
| Compatible Devices | Server |
| Mounting Type | Wall Mount,Floor Mount |
| Weight Capacity | Minimum weight: 130 Pounds |
| Enclosure Material | Alloy Steel |
Available variants
Size
- 22U - 600mm Depth
- 9U - 600mm Depth
- 12U - 600mm Depth
- 18U - 600mm Depth
- 6U - 600mm Depth
- 9U - 450mm Depth
- 15U - 600mm Depth
- 12U - 450mm Depth
- 18U - 450mm Depth
- 15U - 450mm Depth
- 6U - 450mm Depth
Recommended next
Hmseng adjustable PC tower stand for carpet (mobile cpu stand with 4 casters)
An adjustable, caster-based PC tower stand that lifts your desktop off carpet and floor, adds airflow at the base, and lets you roll your tower under a desk with two locking wheels. It’s a budget-friendly option for most case sizes, with the main tradeoff being mild wobble when extended to the widest setting.
NavePoint 15U Server Cabinet Wall Mount Rack Enclosure with Caster
A sturdy 15U network cabinet built for 19-inch rack gear, with a locking tempered-glass door, removable side panels, and built-in fans. Best for home labs and small IT installs that need a neat, secure enclosure, but it is a bit depth- and airflow-sensitive (the included fans can be loud).
StarTech.com 1U 4-Post Server Rack Shelf, Vented, Adjustable Mounting Depth (28-34.4in/71.1-87.3cm), 150lb (68kg) Capacity, Black
A vented, adjustable-depth 1U shelf designed for EIA-310-compliant 4-post 19-inch racks. It’s built from cold-rolled steel and supports up to 150 lb, making it a solid option for heavy network gear or for adding an install surface where 2-post or shallow mounting is tricky.
ECHOGEAR 20U Open Frame Rack for Servers & AV Gear
The ECHOGEAR 20U open frame rack is a wall-mountable, alloy-steel option for organizing server and A/V gear with airflow built into the design. It ships with two vented shelves and mounting hardware, but it is not a closed cabinet, so you should plan your component fit and mounting hardware needs up front.