WONNIE Tablet Holder for Car, Upgraded iPad Holder for Car Mount Headrest, iPad Mount Back Seat for Kids with Anti-Slip Strap
Quick take
The WONNIE car headrest tablet holder is a universal mount that grips 7 to 12.9-inch tablets using a high-elasticity silicone holding net and an adjustable nylon headrest strap. It is geared toward backseat use, especially for kids, and is designed to install quickly without tools. The main thing to double-check is whether your tablet size (and any case thickness) sits securely in the elastic net for your specific seating position.
Pros and cons
Pros
- Universal fit for 7 to 12.9-inch tablets, including iPad sizes (with or without a case).
- Uses a silicone holding net and nylon strap intended to reduce scratching and improve grip.
- Adjustable installation on many car headrests, horizontally or vertically.
- Designed for quick install and removal (no auxiliary tools needed).
Cons
- Best suited to headrest/back-seat mounting, so it may not meet needs where you want a more rigid, arm-style dashboard mount.
- While it accommodates different tablet sizes, fit can vary based on how your tablet and case sit inside the elastic net.
What buyers think
Buyer-review evidence is broadly positive, with repeated themes around setup convenience, stability after installation, and versatility across different devices. Many comments describe the holder as easy to put on and take off, and specifically note that once the straps are secured, the tablet does not move much during drives. Shoppers also highlight flexibility for different tablet sizes and that the holder can be used for longer trips where keeping the tablet accessible matters.
That said, buyer-review evidence is somewhat limited on edge-case scenarios, such as how consistently it works in every possible headrest geometry or for all tablet orientations. Overall, the pattern points to a practical, backseat-focused holder that emphasizes tool-free installation and anti-slip grip rather than rigid positioning.
How the WONNIE holder works (and why it matters)
This is a strap-and-net style mount for car headrests or backseat setups. Instead of clamping with hard plastic jaws, it uses a high-elasticity silicone holding net to grip your tablet (7 to 12.9 inches). A nylon headrest wrapping strap helps secure the holder to the car, and the design includes non-slip behavior through upgraded surface contact (the silicone net bonds to the strap area).
In practice, the system is meant to keep the tablet stable for backseat viewing, while also being easy to remove when you no longer need screen time.
Key features that affect day-to-day use
Universal tablet sizing (7 to 12.9 inches)
The elastic silicone net is designed to stretch to tablet sizes in the 7 to 12.9-inch range. This is a good sign if you have an iPad family device or mixed tablets in the household, because you likely will not need a different mount for each screen size.
Anti-slip grip and scratch-resistance approach
The holding surface is built around soft materials (silicone net plus nylon strap). This matters because it can help reduce the “hard clamp” feeling and may be gentler on tablet surfaces than mounts that rely on rigid plastic contact points.
Adjustable strap, horizontal or vertical
The headrest strap is adjustable to install in different orientations (horizontal or vertical), which can help you line up the tablet view for kids or for rear passengers. This also improves compatibility with different headrest shapes and spacing.
Install and remove without tools
For frequent road-trip use, quick setup matters. The design is intended for tool-free installation in a few steps, and it can be torn down quickly by removing the headrest band.
What it includes
The package includes 1 car headrest wrapping strap and 1 silicone holding net.
Pros and cons (buyer-fit verdict)
Who it’s best for
- Parents and grandparents looking for a backseat tablet holder that can keep kids entertained on longer drives.
- Families with multiple tablets in the 7 to 12.9-inch range who want one universal mount.
- Shoppers prioritizing simple install and quick removal over heavy, rigid mounting hardware.
Who should consider alternatives
- Buyers who need a front-seat or dashboard mount style solution, rather than a headrest/backseat strap setup.
- Shoppers whose tablet setups do not sit comfortably in an elastic net, especially if you use a very bulky case or require a very specific angle that a strap-based mount cannot replicate.
Price and availability
It is typically positioned as a budget-friendly car tablet mount, which can make sense if you want hands-free viewing for road trips without paying for complex vehicle-specific mounting systems. Check the latest price and shipping status on the retailer page before ordering.
FAQ
Will this fit my iPad or tablet with a case?
It is designed to fit 7 to 12.9-inch tablets, and it is intended to work with tablets both with and without a case. If your case is very thick, you may want to check that your tablet still sits securely within the silicone holding net.
Can it be installed horizontally or vertically?
Yes. The headrest strap supports installation horizontally or vertically, which can help you choose a comfortable viewing orientation for backseat use.
Is this meant for backseat/headrest mounting, or does it mount elsewhere?
This holder is designed for car headrest and backseat mounting via a wrapping strap. If you need a different type of mounting location (for example, dashboard or windshield), you may need a different category of mount.
Is it easy to remove when not using it?
Yes. The design is intended for quick removal by taking off the headrest band, so you can detach it when you want a clear seating area.
What tablets sizes are supported?
It targets tablets in the 7 to 12.9-inch range.
Specifications
| Product Title | WONNIE Tablet Holder for Car, Upgraded iPad Holder for Car Mount Headrest, iPad Mount Back Seat for Kids with Anti-Slip Strap, Silicone Holding Net/Fits All 7-12.9'' Tablets |
|---|---|
| Category | Electronics > Computers & Accessories > Tablet Accessories > Mounts |
| Brand | WONNIE |
| Manufacturer | WONNIE |
| Model Name | WONNIE Tablet Holder for Car |
| Model Number | WONNIE Tablet Mount for Car |
| Item Weight | 0.67 Ounces |
| Color | Black |
| Compatible Devices | Compatible with all 7 -12.9" Tablets/ iPad Pro Air Mini/ Kindle Fire Hd / Switch |
| Compatible Phone Models | Can be installed vertically or horizontally, Work well with tablets with or without case |
| Mounting Type | Car Headrest/Car Backseat Strap/Car Seat Holder |
| Additional Features | Adjustable headrest wrapping strap for most car hreadrests, Easy to install, No slip, drop and scratch, Portable, detechable, sturdy and foldable, Upgraded high-elasticity silicone holding net - Fits all 7-12.9" tablets |
| Weight Capacity Maximum | 300 Grams |
| Water Resistance Level | Waterproof |
| Compatible with Vehicle Type | Automobile |
| Item Dimensions | 9.5 x 7.5 x 0.65 inches |
| Unit Count | 1.0 Count |
| Arm Length | 7 Inches |
| Enclosure Material | Nylon, Rubber, Silicon |
| Mfr Part Number | 1 |
| Warranty Description | Manufacturer warranty for 1 Year from date of purchase. |
| Built-In Media | 1* Car Headrest Wrapping Strap, 1* Sofe Silicone Holding Net |
| Shape | Rectangular |
Available variants
Size
- 1 Pack- fits 10-12.9" tablet
- 4 Pack- fits 7-12.9" tablet
- 1 Pack- fits 7-12.9" tablet
- 2 Pack- fits 10-12.9" tablet
- 2 Pack- fits 7-12.9" tablet
Recommended next
Lamicall Gooseneck Tablet Holder, Tablet Stand
A flexible gooseneck clip stand designed for 4.7 to 10.5-inch tablets and e-readers, aimed at comfortable reading and viewing from desk or bed. It offers adjustable positioning and easy mounting, but it is mainly for low-interaction use, and some buyers report the arm or base hardware can fail over time if moved or adjusted aggressively.
MAGIPEA Gooseneck Tablet Holder for Bed, Flexible Tablet Stand Holder
The MAGIPEA gooseneck tablet holder is a clip-on mount with a reinforced flexible arm and a 360° rotation clamp, designed for hands-free use on beds, desks, and tables. It’s a strong fit for people who want an easy way to position a 4.7 to 13-inch tablet or compatible e-reader, but you may need two hands to set the viewing angle and to manage stability with heavier devices.
FANGOR Car Headrest Mount Holder, Tablet Holder for Kids in Back Seats, Anti-Slip Strap and Holding Net,Angle-Adjustable/Fits All 7 Inch to 12.9 Inch Tablets
A strap-and-net style headrest tablet mount designed for kids’ tablets in the back seat. It focuses on quick installation, angle adjustment, and a rubber net plus elastic/Velcro-style fastening meant to reduce device movement while driving. Main caveat: durability of the elastic bands is a common concern, so it helps to handle the straps gently.
Lamicall Car Tablet Mount, Headrest Tablet Holder review
The Lamicall headrest tablet mount is a quick-install, 360-degree rotatable stand designed for road-trip viewing behind the driver. It’s a strong fit for cars that have metal headrest rods and for tablets/phones roughly in the 4.7 to 13-inch range, but it can be picky about headrest shape and how bulky your device case is.