FANGOR Car Headrest Mount Holder, Tablet Holder for Kids in Back Seats, Anti-Slip Strap and Holding Net, Angle-Adjustable/Fits All 7 Inch to 12.9 Inch Tablets
Quick take
This FANGOR headrest tablet mount uses an adjustable wrap strap plus a rubber holding net to secure tablets in the back seat, aiming to keep devices stable while you drive. It is designed for 7 to 12.9-inch tablets and is a practical add-on for road trips and long rides with kids. The main buying caveat is that a few buyers raise questions about long-term durability of the elastic/strap components, so it is smart to treat the straps gently.
Pros and cons
Pros
- Designed to fit 7 to 12.9-inch tablets, including popular iPad and Fire/Kindle Fire sizes.
- Angle-adjustable headrest strap setup, with a rubber holding net to help protect against scraping.
- Portable, detachable design that folds down for easier travel and storage.
- Many buyers report the tablet stays secure during 10-hour-plus drives with little to no shifting.
Cons
- Durability of the elastic bands/strap system is a recurring concern, with limited proof for very long-term use.
- Supports a specific mounting style (headrest wrap), so it only works well if your car headrest and seating layout suit that approach.
- Max capacity is listed at 160 grams, so heavier tablets or thick cases may need extra consideration.
What buyers think
Buyer-review evidence is fairly consistent on day-to-day performance: people use this mount to keep kids entertained on long drives, and they commonly report that tablets hold in place without obvious movement while the vehicle is moving. Setup is also frequently described as straightforward, with several buyers saying they could figure it out quickly and that it adjusts to different headrest configurations. Portability is another theme, since the mount folds and can be swapped between vehicles.
The main area where review evidence is less settled is long-term wear. A smaller number of buyers express uncertainty about how long the elastic/strap components will last, even while still finding the mount sturdy in the short term. Overall, it looks like a strong practical option for back-seat entertainment, with the durability tradeoff being the main question mark.
How it works and what to expect
This mount attaches to the car headrest using an adjustable wrap strap. A rubber holding net is meant to grip the device more securely and help prevent scratching. The setup is also angle-adjustable, which matters because back-seat viewing angles can vary widely depending on the vehicle and where the child will sit.
It is built for tablets sized between 7 and 12.9 inches. It is described as compatible with tablets with or without protective cases, and its detachable design is intended to make installation and removal quick.
Fitting your tablet: key compatibility points
- Screen size range: 7 to 12.9 inches is the target fit window.
- Mounting method: headrest strap wrap style, so compatibility depends on having a headrest that allows the strap to cinch securely.
- Weight limit guidance: maximum listed weight capacity is 160 grams.
- Case consideration: it is intended to work with tablets whether or not they have cases, but very bulky cases could change how snug the net and strap positioning feels.
Pros and cons in real shopping terms
Good fit for
- Families who use tablets for back-seat entertainment and want a more stable setup than hand-holding.
- Road-trip travelers who will move the mount between cars and want something that detaches and folds.
- Buyers prioritizing stability and a viewing angle you can adjust after installation.
Not the best fit for
- People with heavier tablets or thick setups where the listed 160-gram maximum could be a concern.
- Cars or seating positions where the headrest strap style does not sit securely or does not provide a good viewing angle.
- Buyers who want maximum long-term strap wear certainty, since durability questions show up in the review evidence.
Durability and reliability: the main uncertainty
Many buyers describe short-to-mid term stability during drives, suggesting the design can hold a tablet firmly once adjusted. Still, there is some uncertainty around how long the elastic/strap component holds up under frequent use. If you buy this, a safe approach is to avoid overstretching the strap during setup, adjust gently, and remove it when not needed for the drive.
Value: does it make sense for the use case?
At its core, this mount is a budget-friendly way to set up tablets for kids in the back seat. It is competing in a category where the decision usually comes down to fit range, stability while driving, and whether the mounting style works with your vehicle’s headrest. Based on buyer reports, the day-to-day stabilization and adjustability appear to be the strongest strengths. The durability question is the tradeoff to keep in mind if you plan heavy, repeated use.
Verdict
The FANGOR car headrest tablet mount is a solid pick if you want a strap-and-net style holder for 7 to 12.9-inch tablets, especially for back-seat entertainment during long drives. It is frequently reported as sturdy and stable once installed, but if you are especially concerned about long-term strap/elastic wear, plan to handle adjustments gently and reassess expectations based on how often you will use it.
View it on amazon
FAQ
Will this fit my tablet?
It is designed for tablets sized 7 to 12.9 inches. It also targets common tablet models and is intended to work with or without protective cases, but very bulky cases may affect how snugly the net and strap secure the device.
Does it work on any car headrest?
It uses a headrest wrap strap, so it works best when your headrest shape and available space allow the strap to cinch securely. Cars with unusual headrest designs may require testing the fit before relying on it for every drive.
Is it stable while the car is moving?
Buyer feedback commonly reports that the tablet stays in place during drives and can be positioned for easier viewing after setup. As with any mount, correct adjustment is key.
How durable are the elastic/strap components?
Some buyers express uncertainty about long-term durability of the elastic/strap parts. The short-term performance described in reviews is positive, but long-term wear proof is not as strong, so gentle handling is recommended.
What is the weight capacity?
The mount lists a maximum weight capacity of 160 grams.
Specifications
| Product Title | FANGOR Car Headrest Mount Holder, Tablet Holder for Kids in Back Seats, Anti-Slip Strap and Holding Net,Angle-Adjustable/Fits All 7 Inch to 12.9 Inch Tablets |
|---|---|
| Category | Electronics > Computers & Accessories > Tablet Accessories > Mounts |
| Brand | FANGOR |
| Manufacturer | FANGOR |
| Model Name | FG-12345 |
| Model Number | FG-12345 |
| Item Weight | 5.92 ounces |
| Color | Black |
| Compatible Devices | Compatible with all 7 -12.9" iPad Pro Air / Kindle Fire Hd / Tablets |
| Compatible Phone Models | Tablets |
| Mounting Type | Wraping strap style |
| Additional Features | Adjustable, Portable, Easy & Detachable, Upgraded Durable Elastic Velcro Strap Design, No Drop, Upgraded high-elasticity rubber holding net - fit for 7-12.9" tablets |
| Weight Capacity Maximum | 160 Grams |
| Water Resistance Level | Waterproof |
| Compatible with Vehicle Type | Automobile |
| Item Dimensions | 6.1 x 1.18 x 4.72 inches |
| Arm Length | 7 Inches |
| Enclosure Material | Rubber |
| Mfr Part Number | 1 |
| Warranty Description | 365 Days Replacement Sevice |
| Shape | irregular shape |
Available variants
Size
- 1 Pack - fit for 7-12.9" tablet
- 4 Pack - fit for 7-12.9" tablet
- 1 Pack - fit for 7-13" tablet
- 1 Pack - fit for 4.7-13" tablet and phone
- 2 Pack - fit for 7-12.9" tablet
Recommended next
Lamicall Gooseneck Tablet Holder, Tablet Stand
A flexible gooseneck clip stand designed for 4.7 to 10.5-inch tablets and e-readers, aimed at comfortable reading and viewing from desk or bed. It offers adjustable positioning and easy mounting, but it is mainly for low-interaction use, and some buyers report the arm or base hardware can fail over time if moved or adjusted aggressively.
APPS2Car Tablet Car Mount for iPad Truck Holder Long Arm Extension Strong Suction Cup Windshield Mount
The APPS2Car long-arm windshield mount is a hands-free tablet and phone holder aimed at road trips and bumpy rides. It combines a thick rubberized aluminum arm with a two-stage locking suction cup for a secure grip, with 360-degree rotation for aiming your screen. The main tradeoff is compatibility, it does not work with certain large iPad models and it is not designed to support tablets using the long side.
MAGIPEA Gooseneck Tablet Holder for Bed, Flexible Tablet Stand Holder
The MAGIPEA gooseneck tablet holder is a clip-on mount with a reinforced flexible arm and a 360° rotation clamp, designed for hands-free use on beds, desks, and tables. It’s a strong fit for people who want an easy way to position a 4.7 to 13-inch tablet or compatible e-reader, but you may need two hands to set the viewing angle and to manage stability with heavier devices.
Lamicall Car Headrest Tablet Holder (3-in-1 Adjustable Extension Arm)
The Lamicall car headrest tablet holder is built for back-seat viewing, with a metal headrest crossbar, a twist-and-extend biaxial arm, and 360-degree rotation to reduce neck strain on road trips. It’s designed for 4.7 to 11-inch devices, but you need the right headrest rod spacing, it’s not meant for headrests without rods, and thicker tablet cases may not fit securely.