weBoost 3/4" NMO with 14' RG58 Cable & SMA Male Connector - Retail Packaging, Black
Quick take
This weBoost/Wilson NMO kit is designed to mount an NMO antenna on a vehicle roof or similar surface, then connect it to your signal booster using a coax cable. It includes a 3/4-inch non-magnetic NMO option and a 14-foot RG58U run with an SMA-Male connector, which makes it a convenient choice for car installs where you need a bit of cable length. The main thing to double-check is connector compatibility, since SMA gender and type (and your booster’s antenna port) must match.
Pros and cons
Pros
- Includes the 3/4-inch 901150 NMO component for roof mounting and a 14-foot RG58U coax cable for typical vehicle routing.
- Comes with an SMA-Male connector to match booster antenna inputs that use SMA (when compatible).
- Impedance is listed as 58 ohms, aligning with common coax expectations for these setups.
- Works for buyers setting up cellular signal boosting (and some buyers repurpose it for RF projects where the connector type fits).
Cons
- Not every signal booster or RF device uses SMA-Male, so if your system expects a different SMA gender or type, you may need an adapter.
- RG58U cable is 14 feet, which is convenient for many installs, but shorter or longer runs may require a different cable solution.
What buyers think
Buyer-review evidence for this kit is generally positive but limited in detail. The most consistent themes are a good fit for the intended install (roof mounting and use with cellular boosters), and the fact that the connector type matters for real-world compatibility. Some buyers specifically call out the SMA being the “standard” female or male style they expected for their handheld or booster setup, and that it helped them avoid mismatch issues. Beyond compatibility and install simplicity, there is not enough recurring review detail to make strong claims about long-term signal performance beyond what’s implied by the included coax and connector design.
What this kit is for
This is a vehicle roof-mount NMO coax cable kit intended to connect an NMO antenna to a cellular signal booster. The included 901150 NMO component is a 3/4-inch option designed for non-magnetic mounting, paired with a 14-foot RG58U cable run and an SMA-Male connector.
In practical terms, you would use this when you have (or are planning to use) an NMO antenna, want a single packaged solution for the coax length you need, and your booster’s antenna port uses an SMA-Male compatible interface.
Key specs that affect buying decisions
- Mounting: 3/4-inch NMO (non-magnetic option), model 901150.
- Cable: 14-foot RG58U coax cable run (58-ohm impedance).
- Connector: SMA-Male connector on the cable end.
- Model: 901150 (black, single item).
Pros and cons for common buyer scenarios
Best for vehicle installs with NMO antennas
If your setup uses an NMO antenna and you want a ready-to-route 14-foot cable to reach your signal booster inside the cabin, this kit’s packaged length and connector choice are a straightforward match.
Be careful if your booster expects a different SMA setup
Because the cable ends in SMA-Male, it must pair correctly with your booster’s antenna port or any adapter you plan to use. Buyers who work with multiple RF devices (for example, ham or other radio equipment) often run into gender or SMA-type mismatches, and review commentary highlights that compatibility can be the difference between “fits perfectly” and “you need an adapter.”
How to check compatibility before you buy
- Confirm your booster’s antenna connector type and gender. This kit provides an SMA-Male end, so your booster input (or adapter chain) needs to mate correctly.
- Confirm you are using an NMO antenna. The included mount is built around the NMO form factor, so it is not a general-purpose antenna base for other thread styles.
- Plan your cable route length. At 14 feet, it generally suits typical vehicle routing, but measure your path from the roof mount location to where the booster will sit.
Alternatives to consider (by your use case)
- If you need a different cable length: look for the same NMO mount and coax approach but with a cable run closer to your measured routing distance.
- If your system does not use SMA: consider a kit or adapter that matches your booster’s antenna connector standard, rather than forcing a mismatch.
- If you are starting from scratch: you might prefer a complete signal booster antenna kit bundle (booster plus antenna and cabling) so connector types are coordinated in one package.
Verdict
The weBoost 3/4-inch NMO with 14-foot RG58U cable and SMA-Male connector is a practical choice for buyers assembling or upgrading a vehicle-mounted signal booster installation that already uses an NMO antenna. The biggest deciding factor is connector compatibility, so match the SMA type and gender to your booster (or plan for an adapter) before buying.
FAQ
What connector does this cable use?
It includes an SMA-Male connector on the cable end.
Is this kit only for weBoost cellular boosters?
It is intended for cellular signal booster antenna connections, and compatibility depends on your antenna port type. As long as your system matches the NMO antenna mount style and SMA-Male connector requirements, it can fit more than one use case.
How long is the coax cable?
The kit includes a 14-foot RG58U coax cable run.
What does “3/4-inch NMO, non-magnetic” mean?
It describes the NMO mounting option included in the kit, using a 3/4-inch NMO form factor and a non-magnetic mount configuration for roof or similar surfaces.
Do I need an adapter for my signal booster?
You might, depending on what connector your booster uses. If your booster input does not accept an SMA-Male cable directly, you will likely need an appropriate adapter or the correct matching cable.
Specifications
| Product Title | weBoost 3/4" NMO with 14' RG58 Cable & SMA Male Connector - Retail Packaging, Black |
|---|---|
| Category | Cell Phones & Accessories > Accessories > Signal Boosters |
| Brand | weBoost |
| Manufacturer | Wilson Electronics |
| Model Number | 901150 |
| Color | Black |
| Item Weight | 0.46 Pounds |
| AntennaDescription | Cellular Signal Boosting |
| UPC | 811815024262 780320017277 |
| Global Trade Identification Number | 00811815024262 |
| Number of Items | 1 |
| Mfr Part Number | 901150 |
| Built-In Media | coax cable |
| Warranty Description | 2 YEARS |
| Unit Count | 1 Count |
| Number of Channels | 1 |
| Impedance | 58 Ohms |
| Maximum Range | 14 Feet |
| Antenna | Cellular Signal Boosting |
| Number of Packs | 1 |
Recommended next
HiBoost Cell Phone Signal Booster for Home Office and Multi (Up to 8,000 Sq Ft, 2 Indoor Antennas)
The HiBoost home cell signal booster is built for large spaces, using two indoor antennas (one built-in) plus app-guided setup to improve weak 4G/5G coverage across multiple US carriers. It can be a strong choice for basements, offices, cabins, and metal buildings, with the main tradeoff being that it works best when you can provide an acceptable outside signal and take time aligning the antennas.
Diaclara Magnetic Designed for iPhone 17 Pro Max Case Full
The Diaclara Magnetic Designed for iPhone 17 Pro Max case is a full-body, dual-layer bumper style cover with a built-in PET screen protector and MagSafe-compatible magnet ring. It’s positioned for drop protection and everyday durability, but it is not water resistant and some finishes can show dirt more easily.
weBoost Home MultiRoom (model 470144) cell phone signal booster
The weBoost Home MultiRoom is a directional, FCC-approved booster designed to reduce dead zones and improve 4G LTE and 5G coverage across up to ~5,000 sq ft. It’s aimed at households with weak outdoor signal who want better call quality and faster data without relying on Wi‑Fi calling, and it works for multiple U.S. carriers, as long as your carrier’s bands are supported and the outdoor antenna can be pointed toward the tower.
SureCall Five-Band RF Signal Meter for 4G LTE, Cellular, PCS and AWS Cell Phone Signal Booster Installation (SC-METER-01)
The SureCall SC-METER-01 is a portable RF signal strength meter for installing and aligning outside antennas for 4G/LTE, PCS, and Cellular/AWS coverage. It’s designed for fast, practical peak-finding during booster setup, but it measures signal strength rather than carrier or tower details, and some AWS/700 MHz block coverage limits may matter depending on your area.