SureCall Five-Band RF Signal Meter for 4G LTE, Cellular, PCS and AWS Cell Phone Signal Booster Installation (SC-METER-01)
Quick take
The SureCall SC-METER-01 is a portable five-band RF signal strength meter meant for finding the best spot to install an outside antenna for 4G/LTE booster setups. It’s geared toward practical antenna alignment, with responsive readings and a controllable backlight for low-light work. The main caveat is that it focuses on signal strength, not carrier/tower identification, and it may not cover every frequency block in your market.
Pros and cons
Pros
- Supports multiple North America bands, including PCS (1930-1995), Cellular (869-894), and AWS (2110-2155).
- Designed for installer-style use, including peak antenna alignment and signal strength mapping.
- Portable power with rechargeable four AAA NiMH batteries (plus included cables and accessories).
- Backlit display for use in darker environments.
Cons
- Measures signal strength, it does not provide carrier-specific information or tower identification.
- AWS coverage may be block-limited in some areas, and it may not read every LTE/700 block.
- Expect some homework, since you may need to confirm which blocks your carriers use where you live.
What buyers think
Buyer feedback is generally positive about using the meter to locate useful signal and improve antenna placement for booster installations. Several buyers describe it as responsive when switching bands or searching for a better orientation, which supports the intended “find the peak” workflow. Users also mention it can be used as a practical way to explore signal “good spots” versus dead zones around town.
Where opinions narrow is around information depth and band/block coverage. Some buyers note limitations like inability to read specific AWS blocks (beyond a certain block range) and that the meter does not show receiving cell/tower identifiers. That combination means the meter helps you measure strength, but you still need to map local carrier frequencies to the band and blocks you care about.
Buyer-review evidence is limited for broad performance comparisons (for example, durability across many environments), but the themes above are consistent with the meter’s stated purpose and how it’s described by users: strong for location and alignment, less complete for carrier-level diagnosis.
How this signal meter fits booster installation
This is not a phone-based speed tester. The SC-METER-01 is designed for RF installation work, helping you choose where an outside antenna should go and how it should be aimed to maximize the strongest signal your booster can amplify.
It supports several common North American cellular groups so you can check multiple bands during setup:
- PCS: 1930-1995
- Cellular: 869-894
- AWS: 2110-2155
- LTE: 746-757 and 728-746
The included SMA-male to N-male cable connectors and right-angle antenna support typical “test and adjust” workflows, where you move the antenna or change direction until the meter indicates the strongest reading.
Key specs that affect real-world use
Signal strength focus
The meter’s core job is measuring signal strength (rated sensitivity listed at -110 dBm) for the supported bands. That can be exactly what you need for antenna placement, because small changes in location and aim often produce noticeable strength differences.
Portability and work-time
It’s rechargeable using four AAA NiMH batteries, with a listed working time range of 2.5 to 3.5 hours. For many installation tasks, that’s enough to test locations, adjust aim, and confirm a stable reading, but if you expect long sessions, plan around battery charging.
Display visibility
A controllable backlight helps during nighttime installs or tight spaces where you need to see the meter while adjusting an antenna.
Connector type
It uses an SMA-male connector, so make sure your antenna and cabling setup matches.
Pros and cons, translated into who should buy
Best for
- People installing or tuning an outside antenna for 4G/LTE booster systems who need a strength meter for peak-finding.
- RVers or homeowners who want a portable way to confirm where signal is stronger before they mount hardware.
- Installers or advanced users who are comfortable doing frequency and band-block mapping for local carriers.
Who should think twice
- Buyers who expect carrier or tower identification on-screen. This is a signal strength meter, not a carrier diagnostic tool.
- Anyone in an area with carrier blocks that fall outside the meter’s measurable range for a band (for example, some AWS blocks). If your market depends on specific LTE/700 blocks, verify compatibility before committing to a booster plan.
- Shoppers who need broader performance metrics like signal quality or SNR. This model is oriented around strength, not quality readouts.
Is the SureCall SC-METER-01 worth it?
It’s worth considering if your main goal is antenna placement and alignment for LTE/4G booster performance, and you’re working with common North America band groups. The responsiveness described by buyers aligns well with that use case.
However, if you’re trying to identify exactly which carrier or tower you are receiving, or you need block-by-block certainty for your local deployments, you may need additional research or a different approach. The value here comes from helping you make placement decisions, not from giving full carrier intelligence.
Alternatives to consider (by feature priority)
- If you want carrier or tower-level detail: look for RF tools that display more than signal strength (for example, options that can report more network-identifying information). This meter’s strength-only workflow may feel limiting.
- If you only need basic direction-finding: some DIY installers rely on signal indicators built into phones, but those can be less consistent than a dedicated meter during antenna optimization.
- If your market has specialized bands: prioritize tools (and booster kits) whose measurable band-block support matches your carrier needs, since some users report AWS block limitations.
Price and availability
Pricing and stock can change quickly. Check the latest price and availability before ordering.
FAQ
What does the SureCall SC-METER-01 measure?
It measures RF signal strength for the supported cellular bands, intended to help you choose antenna location and alignment for booster installation.
Does it show which carrier or cell tower you are connected to?
No. It does not provide carrier-specific or tower/cell ID style identification, so you may need to determine which blocks your carriers use in your area.
Which frequency bands does it support?
It lists support for PCS (1930-1995), Cellular (869-894), AWS (2110-2155), and two LTE ranges (746-757 and 728-746).
How long does the battery last?
The listed working time is 2.5 to 3.5 hours when using the rechargeable four AAA NiMH batteries.
What should I check before buying if my carrier uses specific blocks?
Confirm that your local carrier frequencies and blocks fall within the bands the meter can read. Some buyers report that AWS range may be limited beyond certain blocks, which can affect usefulness in specific areas.
Is this suitable for aligning an outside directional antenna?
Yes. The meter is designed for peak antenna alignment and strength mapping, which is typically the key step in outdoor directional antenna setup for booster installations.
Specifications
| Product Title | SureCall Five-Band RF Signal Meter for 4G LTE, Cellular, PCS and AWS Cell Phone Signal Booster Installation (SC-METER-01) |
|---|---|
| Category | Cell Phones & Accessories > Accessories > Signal Boosters |
| Brand | SureCall |
| Manufacturer | Microcom Technologies, Inc-wireless |
| Model Number | SC-METER-01 |
| Color | Red |
| Item Weight | 0.9 Pounds |
| Wireless Compability | Radio Frequency |
| Special Features | signal strength measurement, frequency level mapping, and peak antenna alignment |
| Compatible Devices | Cellular Devices |
| Frequency Bands Supported | 746-757 LTE, 728-746 LTE, 1930-1995 PCS, 869-894 Cellular, 2110-2155 AWS |
| Range | LTE, AWS, PCS, and Cellular frequencies for all North American cell carriers |
| Smart Home Compatibility | Not Smart Home Compatible |
| Connector Type | SMA-Male |
| Built-In Media | 110 AC Power Adapter, 4 AAA Rechargeable Batteries, 9” and 24” SMA-Male to N-Male Cable Connectors, RF Signal Meter, Right Angle Antenna, User Manual |
| UPC | 856019003026 |
| Global Trade Identification Number | 00856019003026 |
| Mfr Part Number | SC-METER-01 |
| Item Type Name | SureCall Five-Band RF Signal Meter for 4G LTE, Cellular, PCS and AWS Cell Phone Signal Booster Installation (SC-METER-01) |
| Warranty Description | 3 years |
| Wireless Communication Standard | Radio Frequency |
| Special Feature | signal strength measurement, frequency level mapping, and peak antenna alignment |
| Included Components | 110 AC Power Adapter, 4 AAA Rechargeable Batteries, 9” and 24” SMA-Male to N-Male Cable Connectors, RF Signal Meter, Right Angle Antenna, User Manual 110 AC Power Adapter, 4 AAA Rechargeable Batteries, 9” and 24” SMA-Male to N-Male Cable Connectors, RF Signal Meter, Right Angle Antenna, User Manual See more |
Recommended next
weBoost Home MultiRoom (model 470144) cell phone signal booster
The weBoost Home MultiRoom is a directional, FCC-approved booster designed to reduce dead zones and improve 4G LTE and 5G coverage across up to ~5,000 sq ft. It’s aimed at households with weak outdoor signal who want better call quality and faster data without relying on Wi‑Fi calling, and it works for multiple U.S. carriers, as long as your carrier’s bands are supported and the outdoor antenna can be pointed toward the tower.
weBoost Home Complete (Model 470145) signal booster for 5G and 4G LTE
weBoost Home Complete is a powerful, FCC-approved home cell signal booster kit designed to improve coverage across up to 7,500 square feet for compatible U.S. carriers. It’s a strong DIY option for whole-home weak-signal problems, but real-world results depend heavily on mounting, antenna direction, and whether you’re boosting the right carrier bands for your area.
Phonetone Cell Phone Signal Booster for Verizon and AT&T
A dual-band cellular repeater designed for Verizon and AT&T (bands 12/13/17) with AGC automatic gain control and high-gain antennas for up to about 4,500 sq ft of indoor coverage. It can help reduce dead zones when you have weak outdoor reception, but 5G support depends on your carrier’s 5G deployment in those bands and proper antenna placement.
Diaclara Magnetic Designed for iPhone 17 Pro Max Case Full
The Diaclara Magnetic Designed for iPhone 17 Pro Max case is a full-body, dual-layer bumper style cover with a built-in PET screen protector and MagSafe-compatible magnet ring. It’s positioned for drop protection and everyday durability, but it is not water resistant and some finishes can show dirt more easily.