WAudio AC Noise Power Filter (W-4800) Line Conditioner, Surge Protector
Quick take
The WAudio W-4800 is a line conditioner and surge protector meant to reduce electrical “noise” that can ride along the AC power feeding audio-video gear. It combines filtered outlets, surge protection, an overload cutoff (15A total), and automatic phase detection, making it a strong option for home hifi, DJ, or home theater setups that are sensitive to interference. The main caveat is buyer expectations, because power cleanup can be system-dependent, so results may vary based on what is actually happening on your power line.
Pros and cons
Pros
- Includes surge and spike protection with circuit detection for dangerous voltage irregularities.
- Overload protection that shuts off power when total current exceeds 15A, with a reset button to restore power.
- Filtered outlets plus direct outlets (6 filtered, 2 direct) for more flexible power routing.
- Automatic phase and ground wire connection detection.
Cons
- Buyer outcomes depend on your existing power quality, so noise reduction improvements are not guaranteed across every home setup.
- It’s rated for 100 to 240V input (50/60Hz), but heavy equipment still needs to be within the unit’s overall current limits.
What buyers think
Buyer feedback is limited but consistently positive in themes that matter for a line conditioner: many people report a cleaner noise floor, less static, or improved clarity across their audio systems. There is also mention of build quality and using an upgraded power cord, which suggests some shoppers pair the W-4800 with other power accessories to maximize results. Overall, buyer-review evidence supports the idea that some systems benefit audibly, but the dataset is not large enough to predict outcomes for every household.
What the WAudio W-4800 does for your system
This power filter is built around the idea that electrical interference can enter your audio-video equipment through the AC line. When appliances and other electronics share the same wiring environment, the “dirty” power can introduce unwanted noise into components like power supplies, which can affect perceived performance (for example, clarity and background silence). The W-4800 aims to act as a buffer between the wall outlet and your gear, while also adding protection features.
Key features that affect buying decisions
Surge and spike protection for vulnerable electronics
The W-4800 includes voltage detection for dangerous irregularities, plus surge and spike protection. It’s rated with a maximum spike voltage of 3000V, a max surge current of 1000A (8x20 microseconds), and clamping voltage of 470V (8x20 microseconds). In plain terms, that’s the unit’s job in situations where the AC line experiences transients that could stress sensitive equipment.
Overload protection with a reset
To help prevent overheating and unsafe overdraw, the W-4800 shuts off the powered sockets when total current goes above 15A. When that happens, you can press the RESET button to restore power. This feature matters if you plan to plug in power-hungry devices like certain amplifiers, heaters, or multiple components at once.
Filtered outlets versus direct outlets
There are 6 filtered outlets intended to deliver cleaned power to devices you want to prioritize, plus 2 direct outlets. This layout can help you decide what to feed through filtering and what to keep direct depending on your system’s behavior. For example, many buyers dedicate the filtered bank to components where noise performance is most audible, while leaving other loads on the direct side.
Phase and ground detection
The W-4800 can automatically detect phase and ground wire connection of the AC source. If you care about proper grounding and correct hookup for audio gear, this is a helpful “sanity check” feature built into the unit.
Specs that matter in real use
- Noise filtering: Noise filter rating of greater than -10dB in the 2 to 100MHz range.
- Power input: 100 to 240V, 50/60Hz.
- Removable power cord: Uses an IEC type power cord, which means you can upgrade to a different cord if your setup supports it.
- Power rating limitations: Even with surge protection, you still need to respect the 15A overload cutoff for what you plug in.
Who it’s best for, and who should skip it
Best for
- Audio-video owners looking for a line conditioner with both power filtering and surge protection.
- People who want flexibility between filtered and direct outlets.
- Setups where grounding and phase correctness are part of the overall “getting it right” workflow.
- Shoppers who have equipment that is sensitive to noise, such as amplifiers, DJ systems, home recording, or higher-end home theater components.
Who should avoid or reconsider
- Buyers who are primarily trying to solve low-power issues like brownouts, outages, or unstable voltage regulation, because a line conditioner is not the same category as a full AVR or battery-based UPS.
- Anyone planning to exceed the unit’s total current limits. If your load is heavy, you may need to rethink what goes on the conditioner.
Is the waudio AC noise power filter worth it?
If your goal is to clean AC power feeding an audio-video system and you care about added protection and outlet flexibility, the W-4800 is a feature-rich option. The strongest reason to buy is the combination of filtered outlets, surge protection ratings, overload cutoff with reset, and automatic phase and ground detection. The biggest reason to hesitate is that power-quality upgrades can be system-dependent, so you should assume results vary based on your home wiring environment and what gear is connected.
If you want a safe way to decide, map your expected load (especially total current) and consider how many devices you plan to run through filtered outlets versus direct. That will determine whether this layout matches your setup and whether the unit’s filtering and protection features are likely to matter.
Price and availability
Current pricing can fluctuate. Use the button below to check the latest cost and availability on Amazon.
FAQs
Does the WAudio W-4800 work on 100V systems?
The input rating is 100 to 240V (50/60Hz), so it is designed to operate across a wide range of AC inputs, including 100V. If your setup uses a transformer, you still need to ensure your overall load stays within the unit’s 15A overload limit.
How many outlets are filtered versus direct?
The unit includes 6 filtered outlets and 2 direct outlets, giving you a way to route cleaner power to the components you prioritize.
What happens if I overload the conditioner?
If total current exceeds 15A, the powered sockets will turn off. You can press the RESET button to restore power after you reduce the load.
What kind of noise does the W-4800 target?
It’s designed to reduce high-frequency noise on the AC line, with a noise filter rating of greater than -10dB in the 2 to 100MHz range.
Is a line conditioner the same as an AVR or UPS?
No. A line conditioner focuses on filtering electrical interference and includes surge protection. It is not the same as voltage regulation hardware like an AVR or backup power like a UPS.
Can I upgrade the power cord?
Yes, it uses a removable IEC type power cord, which allows you to swap in a different cord if that fits your system.
Specifications
| Product Title | WAudio AC Noise Power Filter - Line Conditioner Power Purifier Surge Protector with Universal Outlets |
|---|---|
| Category | Electronics > Power Accessories > Line Conditioners |
| Manufacturer | Full Tat |
| Item Weight | 5.28 pounds |
| Product Dimensions | 16.14 x 5.12 x 2.76 inches |
| Item model number | W-4800 |
| Is Discontinued By Manufacturer | No |
Recommended next
Furman Elite-15 PF i 13-Outlet Linear Filtering AC Power Source
The Furman Elite-15 PF i is a rack-mount linear AC power conditioner built for audio and video systems that benefit from cleaner power and stronger surge/voltage protection. It offers linear filtering with detailed noise attenuation specs, a mix of linearly filtered outlets (including switched pairs via 12V trigger), and a design aimed at protecting sensitive digital gear.
DYMO Industrial Label Maker & Carry-Case RhinoPRO 5200 Label Maker, for Job Sites and Heavy-Duty Labeling Jobs, Prints Fast, Includes 2 Rolls of DYMO Industrial Vinyl Labels
The DYMO RhinoPRO 5200 is a rugged thermal label maker designed for job sites and industrial labeling, with barcode support and fast workflows for patch panels, wire wraps, and fixed-length labels. It includes a durable carry case and rolls of DYMO Industrial vinyl labels, but you will want to account for a learning curve and reduced print quality when the device is used cold.
Panamax M5300-PM 11-Outlet Home Theater Power Conditioner
The Panamax M5300-PM is a 11-outlet home theater power conditioner built for clean, protected power delivery to audio and video gear. It adds voltage monitoring, isolated outlet banks, coax and Ethernet I/O, and a front USB charger, with a 12V trigger option for staged power-up. Buyers tend to like it for system protection and for a noticeable “cleaner” feel in audio-video setups, though results vary by user expectations.
Pyle 150J Surge Protector Power Strip - 9 Outlet - 15 Amp - 1U Rack Mount with AC Filter (PCO850)
The Pyle 150J is a 9-outlet, 1U rack-mount surge protector designed to keep home, office, and server setups powered with extra outlet space and built-in AC noise filtering. It’s a solid fit for rack-based gear management, but buyers should confirm adapter plug types and check that their power draw matches a 15A circuit.