Pyle 150J Surge Protector Power Strip - 9 Outlet - 15 Amp - 1U Rack Mount with AC Filter (PCO850)
Quick take
The Pyle 150J is a 1U rack-mount power strip that turns one outlet into nine, combining surge protection (150 joules) with built-in AC noise filtering (RFI/EMI). It is best for organized rack setups like AV gear, home studio equipment, or small server runs where outlet spacing and a master switch matter. The main buying caveat is outlet spacing and angle may not suit all bulky “wall wart” adapters, so plan your plugs ahead.
Pros and cons
Pros
- 9 outlets in a 1U rack format, with 8 rear and 1 front outlet for flexible cable management.
- 150 joules surge protection with circuit protection designed for voltage spikes and surges.
- Built-in AC noise filters to reduce RFI/EMI for more stable operation.
- Master power switch for quickly shutting off connected electronics when not in use.
Cons
- Not smart-home compatible, so control is manual only.
- Outlet placement may not fit every adapter, especially bulkier wall-wart power bricks.
- 15A rating means you still need to match your total load to the circuit.
What buyers think
Buyer feedback is broadly positive, with recurring themes around practical usability and setup value. Many mentions highlight the outlet spacing as genuinely helpful, making it easier to connect multiple power adapters without everything overlapping. Several shoppers also describe the unit as well-built for its category, and they like having a master switch for streamlined shutdowns. A smaller number of reviews call out that the rack fit and physical details (like feet position) may affect how neatly it sits in certain rack locations. Overall, buyer-review evidence points to a dependable, rack-friendly surge protector that works well for equipment organization, with limited evidence on long-term surge performance itself.
How the Pyle 150J power strip is built for rack and equipment setups
This is a 1U rack-mount surge protector designed to consolidate power for multiple devices. With 9 outlets total (8 rear, 1 front), it is meant to give you more working room than a typical strip while staying within rack depth constraints. The steel chassis and aluminum front panel are built for daily handling, and the inclusion of a 6-foot power cord helps when you need a little slack to reach your wall outlet or UPS.
Surge protection and AC noise filtering, explained in practical terms
If your gear is sensitive to unstable power, this model targets two common issues:
- Surges and spikes: The strip is rated for 150 joules of surge energy dissipation, with support for handling voltage fluctuations such as surges and spikes. It also uses push-to-reset current protection and a circuit breaker for overload management.
- Noise in the AC line: It includes built-in AC noise filters intended to reduce RFI and EMI. For many home-office and AV users, this category of filtering is primarily about reducing interference that can affect stable performance.
For what it is trying to do day to day, the combination of surge protection plus RFI/EMI filtering is a sensible approach for small rack systems and studio environments where multiple components share a single power path.
Outlet layout and real-world plug considerations
The Pyle 150J’s outlet arrangement is one of its biggest practical selling points. Reviews frequently mention that the spacing helps accommodate multiple wall-wart style adapters. Still, outlet angle and layout can vary in how they handle bulky power bricks. If your devices use large transformers or thick power supplies, test your adapter shapes against the outlet pattern before you commit, and consider using right-angle plugs or slim adapters if needed.
Power capacity and compatibility basics
Key specs to keep you from buying the wrong unit:
- 15A maximum current (North American Type B 3-prong plug).
- Operating voltage: 115V at 60Hz.
- Not smart-enabled: no app or automated switching, the master switch is manual.
- Rack format: 1U, intended for a server rack or equipment rack.
The biggest “gotcha” with any multi-outlet power strip is load planning. If you are powering high-draw devices (like certain heaters, large compressors, or other heavy loads), total current draw matters more than the number of outlets.
Pros and cons recap
- Best for: people who want a rack-mountable surge protector with nine outlets and AC noise filtering for a home studio, AV gear, networking equipment, or small office/server setups.
- Who should buy: buyers who value a clean rack layout, need front and rear outlet options, and want a manual master switch.
- Who should avoid: buyers with primarily smart-home controlled power needs, or those whose adapters are large enough that they may not fit comfortably in the outlet geometry.
Verdict
The Pyle 150J is a straightforward, rack-friendly surge protector power strip with enough outlet capacity (9 total) and supportive features (150J surge protection plus RFI/EMI filtering) to fit many home office, studio, and small rack builds. If your priority is organized, protected power with noise filtering, it is an easy category match. Just verify your adapter sizes and be mindful of the 15A load so it works comfortably with the specific gear you plan to plug in.
FAQs
Is the Pyle 150J surge protector power strip a line conditioner?
It is designed as a surge protector power strip with built-in AC noise filtering (RFI/EMI). That filtering feature is the main reason it is often considered in the “line conditioner” conversation, though it is primarily an outlet strip with surge protection.
How many outlets does it have, and how are they arranged?
It has 9 outlets total: 8 rear outlets and 1 front outlet. This layout is intended to help with cable management and access in a rack.
What surge protection rating does it use?
It is rated at 150 joules for surge energy dissipation, with overload protection using a circuit breaker and push-to-reset current protection.
Will it fit in a server rack?
Yes. It is built for 1U rack mounting and is meant to slide into standard rack equipment spaces for a tidy installation.
Is it smart-home compatible?
No. It does not provide smart-home control. Switching is handled with the manual master power switch.
Does the outlet spacing work with wall-wart adapters?
Outlet spacing is commonly praised for providing extra room, but physical outlet angle and geometry may still be challenging for some bulky adapters. If your power bricks are large, check plug size compatibility before installing.
What should I check before plugging in my gear?
Confirm that your combined power draw stays within the 15A rating and that the voltage matches 115V at 60Hz. Also verify your adapter plug shapes fit the outlet layout.
Specifications
| Product Title | Pyle 150J Surge Protector Power Strip - 9 Outlet - 15 Amp - 1U Rack Mount with AC Filter - Heavy Duty Extension Cord - Overload Protection for Home/Office/Server Use - PCO850 |
|---|---|
| Category | Electronics > Power Accessories > Line Conditioners |
| Brand | Pyle |
| Manufacturer | Sound Around |
| Model Number | PCO850 |
| Color | Black |
| Item Weight | 3.5 Pounds |
| Number of Outlets | 9 |
| Voltage | 120 Volts |
| Other Special Features of the Product | Surge Protection |
| Maximum Current | 15 Amps |
| Power Plug Type | Type B - 3 pin (North American) |
| Surge Protection Rating | 150 Joules |
| Plug Type | Type B |
| Number of Ports | 9 |
| Compatible Devices | Laptop |
| Smart Home Compatibility | Not Smart Home Compatible |
| Amperage | 15 Amps |
| Item Dimensions L x W | 6.5"L x 22"W |
| Recommended Uses For Product | Apartment, Office |
| Enclosure Material | Iron |
| UPC | 068888743754 |
| Global Trade Identification Number | 00068888743754 |
| Mfr Part Number | PCO850 |
| Built-In Media | 9-outlet Rack Mountable Power Strip Surge Protector |
| Warranty Description | 1 year limited |
| Unit Count | 1.0 Count |
Recommended next
DYMO Industrial Label Maker & Carry-Case RhinoPRO 5200 Label Maker, for Job Sites and Heavy-Duty Labeling Jobs, Prints Fast, Includes 2 Rolls of DYMO Industrial Vinyl Labels
The DYMO RhinoPRO 5200 is a rugged thermal label maker designed for job sites and industrial labeling, with barcode support and fast workflows for patch panels, wire wraps, and fixed-length labels. It includes a durable carry case and rolls of DYMO Industrial vinyl labels, but you will want to account for a learning curve and reduced print quality when the device is used cold.
Furman Elite-15 PF i 13-Outlet Linear Filtering AC Power Source
The Furman Elite-15 PF i is a rack-mount linear AC power conditioner built for audio and video systems that benefit from cleaner power and stronger surge/voltage protection. It offers linear filtering with detailed noise attenuation specs, a mix of linearly filtered outlets (including switched pairs via 12V trigger), and a design aimed at protecting sensitive digital gear.
WAudio W-3900 AC Power Filter Power Conditioner with Surge Protection
The WAudio W-3900 is a line conditioner that combines surge protection with filtered outlets for audio and video gear. Buyers who run sensitive systems often report a lower noise floor and cleaner, more focused sound, though the outcome can depend on setup and cable placement. It is a better fit for users who want filtering on some components, not necessarily every device in the rack.
Furman AC-215A Compact Power Conditioner with Auto-Resetting Voltage Protection - Black
The Furman AC-215A is a compact 10A power conditioner designed to clean up AC line noise and help protect A/V gear with auto-resetting voltage protection. It’s a strong fit for small setups, including home theater, projectors, and light pro audio, but the 10A limit and 1200W maximum power mean it may not suit higher-draw systems.