Furman AC-215A Compact Power Conditioner with Auto-Resetting Voltage Protection - Black
Quick take
The Furman AC-215A is a compact 10A (1200W) power conditioner built to help reduce AC line noise and add auto-resetting voltage protection for connected A/V or audio equipment. Review themes point to fewer flickers, pops, and hum when power instability or noise is involved. The main tradeoff is its 10A capacity, so it is best for smaller systems rather than high-draw rigs.
Pros and cons
Pros
- 10 amp rating with circuit breaker support, plus a compact chassis for out-of-the-way placement.
- Auto-resetting EVS circuitry that detects dangerous voltage irregularities and powers down connected equipment during unsafe conditions.
- Linear AC filtering (LiFT) aimed at cleaner power for audio and video clarity.
- Multiple mounting options, including behind a TV/projector or in a rack using included brackets.
Cons
- 10A and 1200W limits may not be enough for larger setups with high total power draw.
- As with any power conditioner, it may not resolve every type of noise or buzz, since AC-related issues can have multiple causes.
- Black/stainless-compact design is functional more than “showy,” which matters if it will be kept in plain view.
What buyers think
Buyer-review evidence is consistent that the AC-215A can improve real-world noise problems that show up as monitor flicker, audio pops, humming, or crackling when other devices in the home create electrical disturbances. Some users also describe long-running buzz issues (for example, noise that changes when touching guitar strings), and report it reduced those effects after adding this unit. The overall sentiment emphasizes solid build quality and practical usefulness for studio or live-sound gear. That said, review evidence is limited in terms of repeatable, measured performance details, so outcomes can still vary depending on the underlying cause of the noise or voltage instability.
What the Furman AC-215A does (and why it matters)
This is a line conditioning and protection device, not just a basic power strip. The AC-215A combines:
- AC noise filtering (LiFT): designed to deliver cleaner power for audio and video gear.
- Surge and spike protection (SMP technology): aimed at suppressing transient events that can affect sensitive electronics.
- Auto-resetting voltage protection (EVS circuitry): when the unit detects dangerous voltage irregularities, it safely powers down the connected equipment, then can resume operation after conditions improve.
For buyers troubleshooting gear noise, flicker, or instability, this kind of combination can be attractive because it addresses more than one problem category (noise plus protection during unsafe voltage events).
Key specs to understand before you buy
- Input voltage: 120V AC.
- Amperage capacity: 10A.
- Maximum power: 1200W.
- Form factor: compact chassis (3.7 lb), 11.25 x 10.75 x 2.75 inches.
- Mounting: designed to attach to flat-screen TV mounts and other remote locations, with included brackets for inconspicuous placement.
- Connector type: barrel connector.
- Warranty: 3-year limited warranty.
Pros and cons in plain English
When this is a good fit
The AC-215A tends to make sense if you have a smaller A/V or audio setup and you want to protect and condition power for components like:
- LCD/plasma TVs and projectors
- Home recording or studio monitoring setups
- DJ equipment and pro audio gear at moderate power draw
- Home entertainment systems where flicker or pops are disruptive
Who should be careful
- You have a high-power system: If your total connected load could exceed 10A or 1200W, you may need a higher-capacity conditioner.
- Your noise problem has a non-AC root cause: Not every hum or buzz is purely power-related. Wiring, grounding, cabling, and device design can also contribute, so power conditioning is most effective when AC noise or voltage instability is the core issue.
- You need a fully “invisible” solution: It can mount discreetly, but it is still a separate box, and the compact metal look may be noticeable in some installs.
Verdict: is the Furman AC-215A worth it?
The Furman AC-215A is a practical choice for people who want a compact, professionally oriented power conditioner for smaller home theater, studio, or live audio setups. The strongest buyer signal is that it can reduce common symptoms tied to AC line noise and electrical disturbances, especially flicker and audio popping or hum. If your system’s total power draw stays within 10A/1200W, and you’re specifically dealing with noise or unstable voltage behaviors, it is the kind of upgrade that can be worth pursuing. If you need to condition power for larger loads, or if the noise issue is likely driven by something other than AC power quality, you may get more value by looking at a different capacity class or focusing on other troubleshooting steps.
Alternatives to consider (based on your priorities)
Because no direct competitor models were provided, use these comparison criteria to narrow options in the line conditioner category:
- Need more capacity: look for a model rated higher than 10A (and higher maximum watts) if your gear stack is power-hungry.
- Focus on live sound or rack installs: prioritize rack-friendly designs with appropriate mounting and load rating for your mixer, amps, and accessories.
- More emphasis on surge only: if you mainly want spike suppression and not line filtering, you may find simpler protection-focused devices, but they may not address noise symptoms the same way.
- More emphasis on audiovisual clarity: compare filtering approach and how the unit is designed for audio/video use cases.
Ready to check current pricing?
FAQ
Does the Furman AC-215A reset automatically after voltage protection kicks in?
Yes. It uses auto-resetting EVS circuitry designed to detect dangerous voltage irregularities and safely power down connected equipment in unsafe conditions.
What is the Furman AC-215A rated for in terms of load?
It is rated for 10A and up to 1200W (120V AC input).
Will a power conditioner eliminate all hum, buzz, or noise in audio systems?
It can help when noise is related to AC line conditions, but hum and buzz can have multiple causes. If the underlying issue is wiring, grounding, or device-specific, you may still need additional troubleshooting.
Is the Furman AC-215A meant for home theater or studio use?
It is designed for both. It targets surge/spike protection and line filtering for A/V gear, with mounting options that fit behind TVs, projectors, or in racks.
How is it installed?
It uses a compact chassis with included brackets for mounting in discreet locations, including behind a projector or flat-screen TV and in other remote setups.
Specifications
| Product Title | Furman AC-215A Compact Power Conditioner with Auto-Resetting Voltage Protection - Black |
|---|---|
| Category | Electronics > Power Accessories > Line Conditioners |
| Brand | Furman |
| Manufacturer | Furman Pro |
| Model Number | AC-215A |
| Color | Black |
| Material | Stainless Steel |
| Item Weight | 3.7 Pounds |
| Connector Type Used on Cable | Barrel Connector |
| Input Voltage | 120 Volts (AC) |
| Amperage | 10 Amps |
| Form Factor | Compact |
| Maximum Power | 1200 Watts |
| Output Current | 10 Amps |
| Item Dimensions | 11.25 x 10.75 x 2.75 inches |
| Enclosure Material | Stainless Steel |
| Specification Met | No, certified frustration-free |
| UPC | 654061028246 |
| Global Trade Identification Number | 00654061028246 |
| Mfr Part Number | AC-215A |
| Unit Count | 1.0 Count |
| Item Type Name | Power Conditioner |
| Warranty Description | 3 year limited warranty. |
| Connector Type | Barrel Connector |
Available variants
Size
- (Pack of 1)
- Pack of 6
Recommended next
G5BLK 9-Outlet G-Type 15-Amp Rack-Mountable Power Conditioner
The APC G5BLK is a 1U, rack-mountable power conditioner built for managing power delivery to home theater and audio equipment. It offers nine total outlets (with always-on options) plus sequenced, delayed turn-on across multiple switched outlets, along with voltage/current display and surge protection rated at 3,400 joules.
Furman ELITE20 PF i Ultra-Linear AC Power Conditioner
The Furman ELITE20 PF i is a 20-amp, rack-focused AC power conditioner aimed at high-end home theater and audio systems where clean power and surge protection matter. Buyers like its practicality for installs where running dedicated lines is difficult, but review evidence is mixed, including at least one report of early failure.
DYMO Industrial Label Maker & Carry-Case RhinoPRO 5200 Label Maker, for Job Sites and Heavy-Duty Labeling Jobs, Prints Fast, Includes 2 Rolls of DYMO Industrial Vinyl Labels
The DYMO RhinoPRO 5200 is a rugged thermal label maker designed for job sites and industrial labeling, with barcode support and fast workflows for patch panels, wire wraps, and fixed-length labels. It includes a durable carry case and rolls of DYMO Industrial vinyl labels, but you will want to account for a learning curve and reduced print quality when the device is used cold.
Furman Elite-15 PF i 13-Outlet Linear Filtering AC Power Source
The Furman Elite-15 PF i is a rack-mount linear AC power conditioner built for audio and video systems that benefit from cleaner power and stronger surge/voltage protection. It offers linear filtering with detailed noise attenuation specs, a mix of linearly filtered outlets (including switched pairs via 12V trigger), and a design aimed at protecting sensitive digital gear.