VAUBORTTI 1" Ball Mount for Garmin Striker 4, Aluminum Extension Arm with AMPS Round Plate
Quick take
This aluminum ball mount extension is built to reposition compatible fish finder and display setups closer to eye level using a 1" B-size ball joint. It also supports an AMPS-compatible mounting plate and a T-bolt track adapter, which can make it easier to build or expand a flexible rig on boats, kayaks, and vehicles. The main buying caveat is ensuring your device uses the right mounting pattern and that you want this specific long-arm, extended-angle positioning.
Pros and cons
Pros
- Rigid, corrosion-resistant anodized aluminum base aimed at long-term outdoor use.
- Extended 10.3 inch arm length with adjustments at four rotation points for viewing angle flexibility.
- 1" B-size ball joint designed to integrate with RAM B-size double socket arm systems.
- Dual mounting approach, including AMPS-compatible plate spacing and a T-bolt track adapter.
Cons
- Ball hold strength may not match some “rubberized” RAM-style ball joints, especially when supporting heavier setups.
- Track mounting depends on having a compatible T-bolt rail or accessory track system.
What buyers think
Buyer feedback is generally positive on fit, build, and integration with existing RAM-style mounting ecosystems. Multiple reviews highlight that the aluminum extension arm adds useful positioning reach, helps devices sit where they are easier to view and access, and feels solid with no noticeable looseness at the ball or plate connections.
There is some limited mixed feedback related to the ball joint feel, where the hold can be less secure than higher-end RAM-style ball joints with a rubberized surface, particularly when heavier loads are involved. Overall, buyer-review evidence points to good rigidity and adjustability, with the biggest “check first” being whether your device weight and vibration conditions require extra grip.
What this mount is for
This is a drill-down, screw-on style mount that combines an extended aluminum arm with a 1-inch (B-size) ball joint. It’s meant to reposition displays and electronics, such as fish finders and marine GPS units, nearer to eye level so you can read screens without awkward bending. The T-bolt track adapter adds a second installation method for setups using accessory rails, which is common on boats, kayaks, and some vehicle or equipment track systems.
Key compatibility details to verify before you buy
Mounting success here depends on matching three things: the ball size, the mounting plate/interface, and your rail system (if using the track adapter).
- Ball joint size: 1" B-size, intended to work with RAM Mount B-size double socket arms.
- Mounting plate patterns: includes a 30mm x 38mm AMPS hole spacing option and also supports a 39mm triangular bolt pattern.
- Track system option: includes a T-bolt adapter compatible with standard kayak or boat accessory rails, such as YakAttack, Scotty, RAM Tough-Track, and similar systems.
Device compatibility is broad across popular marine display brands and models, including Garmin Striker, Echomap, DriveSmart, Dezl, Lowrance Hook and Elite lines, and Humminbird Helix and Solix units. The mount is also positioned for other device use cases like action cameras and rugged tablet-style devices, as long as your device mount or interface matches.
Adjustability and positioning
The extended arm length is 10.3 inches, and it uses four rotation points for fine-tuning your viewing angle. That combination matters for real-world use because small angle changes can make a big difference for glare, screen readability, and reach during operation. If your current setup has the screen too low, too far away, or blocked by a console, this extension-style geometry is the core reason people look at this category of mounts.
Build quality and outdoor use
The base is made from solid anodized aluminum alloy, which is aimed at rigidity and corrosion resistance. In practical terms, that means the mount is designed to handle typical marine and off-road environments where moisture and vibration are recurring concerns. Reviewers also describe the build as solid, with no notable slop in the ball joint or plate connections.
Pros and cons, based on buyer experience
When it’s a strong fit
- You want an extended, eye-level viewing position for a compatible fish finder, marine GPS, or display.
- You already use RAM B-size ball mount components and want something that plugs into that ecosystem.
- Your setup benefits from rail-based accessory positioning, because you have a T-bolt track system available.
- You care about rigidity and corrosion resistance for boat, truck, RV, or off-road use.
Where you should double-check fit
- If your device or camera is heavy, confirm whether the ball joint’s holding strength will be sufficient for your vibration level and how you tighten/adjust it. Some buyers felt the hold can be less secure than rubberized RAM-style ball joints.
- If you plan to mount via the track adapter, make sure your rail actually matches the T-bolt track system standard you intend to use.
Price and availability
This mount is typically positioned in the budget-to-mid range for ball and extension arm accessories, with pricing varying by retailer and time. If you’re comparing options, focus less on the total price and more on what you need included (ball size, plate compatibility, and whether you want track mounting versus drilling).
Alternatives to consider (how to compare)
If you are deciding between mount options, compare by the same criteria this one targets:
- Ball size and ecosystem: RAM B-size (1 inch) compatibility matters if you already own arms or sockets.
- Mounting plate standard: ensure your device uses the AMPS hole spacing or triangular bolt pattern that this mount supports.
- Installation method: choose a drill-down base if you don’t have a track, or choose a track-friendly system if you do.
- Extension length: if your goal is better readability, extension-style mounts often outperform standard short mounts.
If you tell me your exact device model and where you plan to mount it, I can help you sanity-check compatibility and pick the right arm length and interface.
Verdict
The VAUBORTTI 1" ball mount extension arm is a solid choice if you need a rigid, corrosion-resistant aluminum mount that puts compatible Garmin-style and other fish finder or display electronics closer to eye level. It stands out for its extended reach, four-point adjustability, and flexible mounting options via AMPS plate compatibility and a T-bolt track adapter. Just be sure your gear uses the right interface and that ball-joint holding strength will be adequate for your device weight and operating vibration.
FAQs
- What ball size does this mount use?It uses a standard 1-inch ball joint, B-size, intended to work with RAM Mount double socket arms that use the same B-size ball.
- Does it work with AMPS mounting patterns?Yes. It supports AMPS-compatible mounting, including a 30mm x 38mm hole spacing option and also a 39mm triangular bolt pattern.
- Can it mount to a track system?Yes. It includes a T-bolt adapter for compatible accessory rails, such as YakAttack, Scotty, RAM Tough-Track, and similar kayak or boat accessory track systems.
- Is it compatible with Garmin Striker 4?It is designed for Garmin models including the Striker line, along with other popular Garmin, Lowrance, and Humminbird compatible units, as long as your device mounting interface is supported.
- Will it hold heavier devices securely?Buyer feedback suggests the hold may not match rubberized RAM-style ball joints in heavier-load situations. If your setup is heavy or you experience strong vibration, double-check fit and holding behavior for your specific device weight.
Specifications
| Product Title | VAUBORTTI 1" Ball Mount for Garmin Striker 4,Aluminum Extension Arm with AMPS Round Plate – Fish Finder, ELD Mount – Compatible with RAM B Size Kit – T-Bolt Track System |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Marine Electronics > Marine GPS Accessories |
| Brand | VAUBORTTI |
| Manufacturer | VAUBORTTI |
| Model Name | VAUBORTTI 1-inch Ball Mount |
| Model Number | VB-B1002 |
| Color | Black |
| Compatible Devices | Fish Finders, GPS Devices, Action Cameras, Rugged Tablets, Vehicle Monitors |
| Compatible Phone Models | AMPS phone holder (requires additional phone cradle, not included) |
| Mounting Type | Drill-Down Mount / Screw Mount / Surface Mount |
| Additional Features | 4 pivot point, Dual Arm, Extended Arm |
| Water Resistance Level | Water Resistant |
| Compatible with Vehicle Type | Truck, Boat, RV, ATV, UTV, Off-Road Vehicle, Work Van, Semi Truck, Pickup, Agricultural Machinery, Construction Equipment |
| Enclosure Material | Aluminum |
| Mfr Part Number | VB-B1002 |
| Warranty Description | 1 year |
| Built-In Media | T-Bolt Ball Mount Dual Aluminum Arm |
Recommended next
Garmin 6FT Marine Network Cable, RJ45
The Garmin 6FT marine network cable uses RJ45 connectors on both ends with screw collars and a hole plug, designed to connect compatible Garmin chartplotters and marine network devices at 72 inches. It’s a good fit if you want the intended Garmin cabling approach, but it costs more than generic Ethernet cables and only makes sense for Garmin networking setups that accept this style of connection.
Humminbird 600033-1 AutoChart Zero Line North America Map SD Card
The Humminbird 600033-1 is a microSD card (with adapter and case) for AutoChart and AutoChart Live workflows. It comes preloaded with “Zero Lines” shoreline data across the U.S. and Canada and lets compatible Humminbird units record depth and bottom detail directly to the card for later use and sharing across multiple fish finders. Best for anglers who plan to build and display custom lake maps, with the main tradeoff being that it adds cost if you only want basic navigation.
Aluminium Fish Finder & Chartplotter Mount, Reinforced Horizontal Swing Arm Marine Electronic Mount for 5" to 12" Screens
A heavy-duty, all-aluminum swing-arm mount built for saltwater use and designed to hold common marine displays from about 5 to 12 inches. It offers 360-degree rotation and a multi-hole base plate for fitting popular Garmin, Lowrance, and Humminbird chartplotters and fish finders, with some buyer-fit caveats if your exact unit hole spacing is slightly different.
Minn Kota 1866550 Bluetooth i-Pilot System Remote
The Minn Kota 1866550 Bluetooth i-Pilot System Remote adds a practical second control point for Bluetooth-enabled i-Pilot setups. It’s built for everyday deck use with a larger LCD, instant status feedback, and an easy battery compartment, but it only works with i-Pilot systems that support Bluetooth (2017+), so compatibility matters.