Aluminium Fish Finder & Chartplotter Mount, Reinforced Horizontal Swing Arm Marine Electronic Mount for 5" to 12" Screens
Quick take
This reinforced horizontal swing-arm mount is built for marine electronics, combining an all-aluminum body with stainless hardware for better corrosion resistance in saltwater environments. It’s designed to fit a range of popular Garmin, Lowrance, and Humminbird screens (roughly 5 to 12 inches) and includes a base plate with multiple pre-drilled hole options, plus 360-degree rotation.
The main buying caveat is that even with broad device compatibility, your specific screen model may not line up perfectly with the included hole pattern, so you should be ready for careful installation alignment.
Pros and cons
Pros
- All-aluminum reinforced construction rated for up to 110 lbs static load, with 22 lbs dynamic load.
- Saltwater-focused build, using powder-coated marine-grade aluminum and stainless steel hardware.
- 360-degree rotation using two pivot points, which helps with viewing angles from your helm or kayak.
- Broad compatibility for well-known Garmin, Lowrance, and Humminbird models, plus extra mounting screw sets.
Cons
- Hole patterns may not perfectly align with every individual screen unit, requiring extra attention to mounting.
- Designed for flat-surface base mounting (dash, deck, or kayak setup), so it is not for anyone needing a radically different attachment style.
What buyers think
Buyer-review evidence points to strong satisfaction with build quality and stability. Multiple reviewers describe the mount as very sturdy and well made, and at least one specifically mentions smooth motion and a tight lock once installed. Install experience also seems largely positive, with comments calling it easy or a breeze to mount.
Overall, buyer sentiment skews toward “solid value,” but the installation alignment details can matter depending on the exact model and where you mount it.
Why this mount works for marine electronics
If you want your fish finder or chartplotter where it is easy to see and easy to adjust, a swing-arm style mount can be a big upgrade. This one uses a reinforced horizontal swing arm with a rectangular mounting plate, built to hold common display sizes from about 5 to 12 inches. The practical benefit is flexible viewing, especially on bass boats, kayaks, or any setup where your preferred sightline changes with seating position or weather conditions.
Key features that affect real-world use
Heavy-duty load capacity and reinforced arm design
The mount is rated up to 110 lbs static and 22 lbs dynamic. In shopping terms, that matters because you are not just hanging a screen, you are also dealing with motion, vibration, and impact forces while underway or on rough water. This mount is built to remain stable under those conditions and to keep the display securely held.
Saltwater-oriented corrosion resistance
It’s constructed from powder-coated marine-grade aluminum with stainless steel hardware, and it’s described as having been salt spray tested for thousands of hours. For buyers regularly fishing in brackish or salty conditions, corrosion resistance is often the difference between a mount that lasts years and one that degrades sooner.
360-degree rotation for better viewing angles
Two pivot points allow full 360-degree rotation. That means you can reposition the display to reduce glare, keep the screen readable while moving, or angle it toward the person using the helm (or toward your position in a kayak or SUP setup).
Compatibility via base plate hole patterns
The base plate is built with different combinations of pre-drilled holes intended to match many chartplotters, fish finders, and related marine electronics mounting needs. It also comes with complimentary stainless mounting screw sets (four sets are included) to help you adapt to different unit mounting styles.
Even with broad compatibility, it’s still smart to double-check your specific model’s mounting hole spacing and confirm you can select a plate configuration that fits your unit without forcing alignment.
Installation and fit considerations
This mount is designed for down-drilling onto flat surfaces like dashboards, decks, and kayak setups. Before you commit, consider:
- Your surface type: If your mounting location is not flat enough, your screen alignment may be harder to achieve.
- Your exact screen model: The intended compatibility is wide across Garmin, Lowrance, and Humminbird lines, but reviews suggest alignment may not be perfect for every unit.
- Clearance and rotation path: Because it rotates, make sure nothing blocks its movement or causes cables to tug at certain angles.
Pros and cons (summary)
- Buy it if: you want a reinforced aluminum marine mount for a Garmin, Lowrance, or Humminbird display, and you value saltwater corrosion resistance and full rotation for viewing flexibility.
- Avoid it if: your installation requires a non-flat mounting method, or you already know your unit’s mounting geometry does not work well with common multi-hole plates and you do not want to troubleshoot alignment.
- Best for: bass boat consoles, deck or dashboard installs, and lighter craft where a stable, adjustable mount helps you share visibility and maintain a comfortable sightline.
Verdict
The WINDFRD reinforced swing-arm mount is a strong option for shoppers who want a sturdy, saltwater-oriented display holder with 360-degree rotation. The clearest practical tradeoff is fit variability, based on real buyer experience, so take time to verify your specific screen model’s mounting pattern and plan your install location for smooth rotation and cable slack.
FAQ
What screen sizes is this mount intended to fit?
It’s marketed for 5" to 12" fish finder and chartplotter screens.
Is it compatible with garmin, lowrance, and humminbird?
Yes. It is described as compatible with a range of Garmin, Lowrance, and Humminbird models, using a multi-hole base plate and included stainless mounting hardware.
Does it rotate fully, or only to a limited angle?
It supports 360-degree rotation using two pivot points.
How weatherproof is it for saltwater use?
It uses powder-coated marine-grade aluminum and stainless steel hardware, and it’s described as salt spray tested for thousands of hours to help resist corrosion.
Will my exact chartplotter line up perfectly with the included mounting holes?
Compatibility is broad, but some buyers report that certain units may not align exactly with a chosen hole pattern, so you may need to take careful time during installation.
Where can it be mounted?
It’s designed to be down-drilled to flat surfaces such as boat dashboards and decks, and it can also work for kayak setups.
What load capacity should I expect?
It’s rated for up to 110 lbs static load and 22 lbs dynamic load.
Specifications
| Product Title | Aluminium Fish Finder & Chartplotter Mount, Reinforced Horizontal Swing Arm Marine Electronic Mount for 5" to 12" Screens, Compatible with Garmin, Lowrance, Humminbird and More Depth Finder |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Marine Electronics > Marine GPS Accessories |
| Brand | WINDFRD |
| Manufacturer | WINDFRD |
| Model Name | 0c54b96c-be01-4fe4-9f11-ed56866139e1 |
| Model Number | 0c54b96c-be01-4fe4-9f11-ed56866139e1 |
| Color | Black |
| Item Weight | 2.3 Pounds |
| Compatible Devices | Chartplotter, Fish finders, Marine GPS, CB Radios, Ham Radios, Gimbal Brackets |
| Compatible Phone Models | Garmin, Lowrance, Humminbird, Raymarine and more |
| Mounting Type | Dashboard |
| Additional Features | Adjustable, Resistant to High Salt Water Corrosion, Ultra-Strong Load-Bearing |
| Weight Capacity Maximum | 110 Pounds |
| Water Resistance Level | Waterproof |
| Compatible with Vehicle Type | Boat, Kayak |
| Unit Count | 1.0 Count |
| Arm Length | 6 Inches |
| Enclosure Material | Aluminum |
| Warranty Description | 2 year manufacture |
| Built-In Media | Reinforced Marine Electronic Mount |
| Shape | Rectangular |
Recommended next
NMEA 2000 Starter Kit to Process NEMA 2K Network for Lowrance Simrad Garmin
A compact NMEA 2000 starter kit that bundles a power cable, backbone/drop cables, tees, and male/female terminators to help you build or expand a marine NMEA 2000 network for Lowrance, Simrad, and Garmin systems. Buyers highlight easy setup, solid cable feel, and reliable data behavior, with the main caveat being you must plan wiring length and power source switching for your specific boat layout.
Minn Kota 1866550 Bluetooth i-Pilot System Remote
The Minn Kota 1866550 Bluetooth i-Pilot System Remote adds a practical second control point for Bluetooth-enabled i-Pilot setups. It’s built for everyday deck use with a larger LCD, instant status feedback, and an easy battery compartment, but it only works with i-Pilot systems that support Bluetooth (2017+), so compatibility matters.
Minn Kota Advanced GPS Navigation Wireless Remote
The Minn Kota Advanced GPS Navigation Wireless Remote adds deck-side control for compatible Advanced GPS Navigation systems. It offers four programmable One-Boat Network buttons, a waterproof lightweight design, and runs on included AA batteries, with setup centered on Bluetooth pairing.
TUSITA 010-13129-00 Protective Cover Compatible with Garmin Striker Plus 4, Vivid 4cv
The TUSITA silicone sun cover is designed to protect specific Garmin fishfinder/chartplotter models by shielding the main screen from sun, scratches, and everyday elements. Based on buyer feedback, the standout feature is the snug, well-aligned fit, with a thicker soft cover that stays in place better than some rigid or thinner alternatives.