WINDFRD 1.5" / C Size Ball Aluminum Fish Finder Mount with Extension(18.3") Arm
Quick take
This tall bow fish finder mount uses a C-size (1.5") ball-and-socket arm for wide, near-infinite positioning, including 360° rotation. It is a strong fit for anglers who want their screen higher to reduce neck and back strain, with the main caveat being that it is recommended for displays up to 9 inches.
Pros and cons
Pros
- Tall 18.3-inch extension arm is designed to improve sightlines while standing or sitting.
- Dual ball-joint adjustments and 360° rotation help you dial in comfortable viewing angles.
- Marine-grade aluminum construction (powder-coated, salt spray tested) supports corrosion resistance in high-salt conditions.
- Flexible compatibility via AMPS hole pattern and included device mounting plate.
Cons
- Best results are recommended for screens up to 9 inches, larger displays may not be properly supported.
- Humminbird compatibility excludes certain Helix, Onix, and PiranhaMax families.
- It is a drill-down mount, so it is not ideal if you want a no-drill setup.
What buyers think
Buyer-review evidence is limited to a small set of ratings, but the recurring themes are clear: the mount’s aluminum build feels sturdy, the adjustability is genuinely useful (especially for reaching comfortable positions), and the increased height helps reduce bending over to see the screen. Some buyers also mention checking or adding extra security on rare occasions, which suggests movement could be affected by installation and how the mount is tightened and secured during setup.
What this mount is for
This is a tall, adjustable fish finder and chartplotter mount aimed at improving on-water visibility. The extended arm height can be especially helpful for bow-facing installs on bass boats, as well as any setup where you want the screen closer to eye level without stacking extra joints or connectors.
Key features that matter in real use
Height and positioning
The mount includes a double-socket arm with an 18.3-inch length and a 1.5-inch / C-size ball interface. With ball-and-socket technology and 360° rotation, you can fine-tune the display angle for different seating positions and for day-to-day comfort.
Marine-focused build
It uses powder-coated marine-grade aluminum and corrosion-resistant materials intended for saltwater conditions. The construction is cast in one piece of aluminum rather than built from multiple screwed components, which is designed to help the mount stay solid when waves and vibration are part of normal use.
Compatibility for common brands
The rectangle device mounting plate uses pre-drilled hole combinations intended to fit many marine electronic mounting needs, including AMPS-based setups. It also includes complimentary 316 marine grade stainless steel hardware sets (lock nuts and machine/sheet metal screw options), which helps cover typical installation styles.
Brand compatibility highlights:
- Garmin: compatible with many ECHOMAP (CHIRP and Plus/UHD series), GPSMAP (7, 8, and 9 series), and Striker/Striker Vivid models listed in the compatibility notes.
- Lowrance: compatible with popular Eagle, ELITE FS, HDS Carbon/Live/Pro, and Hook/HOOK2 series models listed in the compatibility notes.
- Humminbird: compatible with Helix 8, Helix 9, and Xplore 9 models listed, with the listed exclusions for certain Helix 5/7 and other series.
Installation considerations (and who should buy)
Because it is designed as a drill-down mount, you will want a solid, flat mounting location and the willingness to drill and secure the base. That is usually a good tradeoff when you want stability over the long term.
Best for
- Anglers who want a taller screen position to reduce neck strain on bow installs.
- Anyone using a C-size (1.5") ball mount ecosystem and looking for a long extension arm.
- Owners of compatible Garmin or Lowrance units, or supported Humminbird models.
- Boaters fishing in environments where corrosion resistance matters.
Who should avoid it
- Buyers with screens larger than 9 inches, since the mount is recommended for up to 9-inch displays.
- Humminbird owners with models that are explicitly excluded (for example, certain Helix and Onix/PiranhaMax families listed in the notes).
- Shoppers who need a no-drill mounting solution.
Pros and cons recap
- Strong value for tall viewing: the 18.3-inch arm is built around comfort and visibility.
- Adjustment is the point: ball-and-socket positioning makes it practical to match your stance and conditions.
- Make sure your screen size and model are compatible: stick to the 9-inch recommendation and double-check Humminbird exclusions.
Is it worth it?
If your goal is to improve screen viewing angle without bending or relying on multiple stacked connectors, this tall C-size ball mount is likely a good fit. It also makes sense if you value saltwater-oriented materials and want a stable, drill-down installation. The main reason not to buy is screen size (over 9 inches) or having a Humminbird model that falls into the listed incompatibilities.
Alternatives to consider
- If you need a shorter setup: look for a standard-height ball mount to avoid working outside the recommended screen support range.
- If your priority is quick mounting: consider non drill-down options designed for temporary or portable setups, but verify they still provide the viewing height you want.
- If you have an excluded Humminbird model: choose a mount that explicitly supports your exact unit family, since model-to-model compatibility can vary.
Price and availability
Check current pricing and stock status through the retailer listing. This mount is positioned as a mid-range accessory for anglers looking for a dedicated tall mounting solution.
FAQ
What screen size is this mount recommended for?
For best results, it is recommended for fish finder screens up to 9 inches. Larger screens may not be properly supported.
Is this mount compatible with Garmin fish finders and chartplotters?
Yes, it lists compatibility with many Garmin ECHOMAP and GPSMAP series and several Striker models. Confirm your exact model appears in the supported list.
Is this mount compatible with Lowrance units?
Yes. The compatibility notes include multiple Eagle, ELITE FS, HDS (Carbon/Live/Pro), and Hook/HOOK2 series units. Double-check your specific model number.
Is it compatible with all Humminbird models?
No. The notes indicate compatibility with some Helix and Xplore models, and explicitly exclude certain Helix 5/7, 800, 900, Onix, and PiranhaMax families.
Does this mount support 360° rotation?
Yes. The mount is designed for 360° rotation, and it uses ball-and-socket technology for wide angle adjustment.
Is it drill-down or no-drill?
It is designed as a drill-down mount, using a base with a defined AMPS hole pattern and included hardware.
What comes in the box?
Included components are the AMPS-pattern hole round base, a device mounting plate, and the extra long arm, plus the stainless steel screw and nut hardware sets.
Specifications
| Product Title | 1.5" / C Size Ball Aluminum Fish Finder Mount with Extension(18.3") Arm, Tall Bow Mount for Bass Boat, 360° Rotation, Compatible with Garmin, Lowrance, Humminbird and More |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Marine Electronics > Marine GPS Accessories |
| Brand | WINDFRD |
| Manufacturer | WINDFRD |
| Model Number | 74006d7b-6831-4e15-840d-3102e598d25d |
| Color | Black |
| Material | Aluminum, High-Performance Composites |
| Item Weight | 2.2 Pounds |
| Brand Name | WINDFRD |
| Manufacturer Warranty Description | 2 year manufacture |
| Included Components | AMPS Pattern Hole Round Base, Device Mounting Plate, Extra Long Arm |
| Unit Count | 1.0 Count |
| Material Type | Aluminum, High-Performance Composites |
| Mounting Type | Drill-Down Mount |
Recommended next
C-MAP Reveal - US Lakes South East, Map Card for Marine GPS chartplotters
C-MAP Reveal adds richer shading, detailed vector charts, and advanced bathymetry layers to compatible Marine GPS chartplotters using a microSD card. It’s a strong upgrade for anglers and divers who want clearer shallow-water and drop-off information, but buyers should confirm their specific unit supports the chart features they care about.
Minn Kota 1866680 i-Pilot Heading Sensor Spot-Lock BT (Bluetooth), PowerDrive & Riptide PowerDrive White
The Minn Kota 1866680 i-Pilot Heading Sensor Spot-Lock BT (Bluetooth) helps improve GPS accuracy by providing heading information to compatible trolling motor setups. It’s a straightforward add-on for boaters who want to refine Spot-Lock control and unlock Spot-Lock Jog movement in 5 ft increments, but it’s only useful if your system is compatible with i-Pilot heading sensor functions.
NMEA 2000 (N2K) 15 Foot Backbone, Drop or Extension Cable
A 15-foot NMEA 2000 backbone/drop/extension cable for building or extending a marine N2K network. It features 5-pin connectors on both ends, gold-plated contacts for corrosion resistance, shielded conductors for reduced interference, and an IP67 waterproof test standard.
Humminbird 600033-1 AutoChart Zero Line North America Map SD Card
The Humminbird 600033-1 is a microSD card (with adapter and case) for AutoChart and AutoChart Live workflows. It comes preloaded with “Zero Lines” shoreline data across the U.S. and Canada and lets compatible Humminbird units record depth and bottom detail directly to the card for later use and sharing across multiple fish finders. Best for anglers who plan to build and display custom lake maps, with the main tradeoff being that it adds cost if you only want basic navigation.