Under Desk Cable Management Tray, Xpatee Upgraded Wire Management No Drill No Screws (White)
Quick take
This under-desk cable management tray uses a C-clamp installation, so you can organize power strips and cables without drilling, screws, or glue. It is a solid option if you want a cleaner workspace and faster cable routing, with a main limitation: clamp fit can be affected by under-desk support bars and your desk thickness.
Pros and cons
Pros
- No-drill, no-screw setup using C-clamps (anti-scratch pads included).
- Fully welded, powder-coated metal design aimed at resisting rust and dust.
- Designed to route cables with guardrails and mesh for easier plug management and ventilation.
- Holds up to 10 lbs, with a compact tray size for under-desk organization.
- Includes cable clips and cable ties to help you route and secure cords.
Cons
- Clamp positioning may be less than perfect on desks with an under-bar or limited clearance.
- The included cord-attachment sticky tabs may not work as well for everyone’s cable routing needs.
- Best fit depends on desk thickness being within the supported range.
What buyers think
Buyer-review evidence is strongly centered on how quickly the tray cleans up an under-desk setup. Many shoppers describe the installation as fast and straightforward with the included clamp method, and report that it helps reduce cable tangling and improves desk organization. There are also repeated themes around sturdiness and staying put after installation, even when cables include a power strip or other “bulky” items. A smaller number of comments point to fit challenges on desks with an underneath support bar, plus some mixed experiences with the sticky cord tabs included in the kit. Overall, the review pattern suggests this tray is a practical, no-drill cable organizer for users who can install the clamps with adequate clearance under the desktop.
Who this under-desk tray is for
This cable management tray is a good match if you want to:
- Reduce under-desk clutter by keeping power strips and cables organized instead of loose or on the floor.
- Install without drilling into your desk (using clamp mounting).
- Route cables neatly with a guided, open tray design rather than lacing everything through small openings.
- Improve cable behavior when switching desk height (for standing desks), so cords do not get yanked or tangled as easily.
Installation and desk compatibility basics
The tray mounts with a C-clamp, and it is intended to hang on desk frames rather than be screwed in place. Anti-scratch mats on the clamps are designed to help protect the desktop surface. It is meant for desks with a thickness between 0.4 in and 2.4 in, and it includes practical accessories like cable clips and cable ties for quick cable bundling.
Important fit check: If your desk has an under support bar or other structure near the edge where the clamp grabs on, you may need extra clearance so the clamps can seat properly. In some cases, the clamp may not fit “perfectly,” but the tray can still remain secure, especially if you are not overloading it.
Tray capacity, size, and cable routing
The tray is made from sturdy metal and is fully welded with a powder-coated finish. It is rated to hold up to 10 lbs, and its dimensions are 15.7 in (L) x 6.1 in (W) x 7.3 in (H). The guardrail and mesh style help with plugging in at angles and promote ventilation, which can be useful when you are organizing a power strip and multiple cables in a tight under-desk area.
Pros and cons in real buyer terms
Why people buy it
- Fast setup: The no-assembly-required, clamp-based approach is a key reason buyers install it quickly.
- Less visual clutter: Many buyers focus on improved appearance and a more organized workspace under the desk.
- Stays put: Review themes frequently mention stability after installation.
- Works for everyday setups: It is used to hold power strips and manage multiple cables, with enough capacity for typical office gear.
Where buyers should be careful
- Clearance matters: Under-desk bars or tight gaps can make clamp seating less ideal.
- Accessory performance varies: Sticky cord tabs may not adhere as strongly as some users expect, depending on how and where you route cables.
Alternatives to consider (by what you prioritize)
If this tray seems close but you want to compare options, here are common paths shoppers take:
- If you want even simpler installation: Look for other clamp-on under-desk raceways, but verify compatibility with desk thickness and under-structure clearance.
- If you need more “hold” for cables: Compare models that include stronger bundling accessories or more flexible cable routing channels, especially if you do not want to rely on sticky attachments.
- If you prefer a more permanent mounting: Some screw-mounted cable raceways can offer more rigid placement, but you give up the no-drill convenience.
Verdict
The Under Desk Cable Management Tray from Xpatee is a practical, metal cable raceway for buyers who want a cleaner under-desk setup without drilling. It is especially appealing if your desk fits the supported thickness range and you have enough clearance for the clamp to seat securely. If your desk has a nearby under-bar that interferes with the clamp area, you may need to adjust your placement strategy and be realistic about how perfectly the clamps align.
FAQ
Is this under-desk cable tray truly no-drill and no-screw?
Yes. It is designed to mount using a C-clamp method, with no drilling, screws, or glue required for installation.
What desk thickness does it support?
It is intended for desks with thickness between 0.4 in and 2.4 in.
Will it work on desks with an under support bar?
It may require extra clearance near where the clamps contact the desktop. If an under-bar limits clamp placement, the fit may not be perfect even if the tray remains secure.
How much weight can it hold?
It is rated to hold up to 10 lbs.
What comes in the box?
The kit includes 1 under-desk cable tray, 4 cable clips, and 6 cable ties. It also includes additional cable-routing helpers such as sticky attachments.
Does the tray help with ventilation?
Its mesh-style design and open routing area are meant to support ventilation while cables are organized under the desk.
Specifications
| Product Title | Under Desk Cable Management Tray, Xpatee Upgraded Wire Management No Drill No Screws, Cable Tray with Clamp for Wire Organizers, Computer Cord Rack for Office, Home - No Damage to Desk White |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Cable Raceways |
| Brand | Xpatee |
| Manufacturer | Xpatee |
| Color | White |
| Material | Metal |
| Product Dimensions | 15.7"L x 6.1"W |
| Indoor Outdoor Usage | Indoor |
| Number of Pieces | 1 |
| Unit Count | 1 Count |
| Mfr Part Number | Cabel-White |
| Warranty Description | 1 |
| Enclosure Material | Metal |
| Item Dimensions L x W | 15.7"L x 6.1"W |
| Installation Type | C-Clamp |
| Style Name | Compact |
| Style | Compact |
Available variants
Item Package Quantity
- 1
- 2
Color
- Black
- White
Recommended next
Under Desk Cable Management Tray White, Cinati Wire Organizers No Drill, Cable Tray with Clamp
The Cinati under-desk cable management tray uses a clamp-on design (no drilling) to keep power strips and cables off the desk and floor. It’s a solid metal tray with anti-scratch pads, simple setup, and guidance accessories, but buyers should note limited accessibility and tray placement can feel a bit low for some desks.
EVEO Cable Hider Wall 306”
The EVEO Cable Hider Wall 306” is a slim, paintable wall cord cover designed to conceal and organize TV and entertainment wiring. It’s easy to install with self-adhesive options or screws, but you’ll want to plan placement carefully because strong adhesive can make relocation tricky.
Delamu Cord Hider, 157in Wire Covers for Cords on Wall
The Delamu Cord Hider (157-inch wall-mounted cable raceway) is designed to conceal 2 to 3 cords in a clean, paintable channel. It installs with an attach-and-snap design and can use adhesive tape or screws, but the adhesive tape is strong enough to risk paint damage if you remove it later.
ENONCI Updated Cable Raceway Kit - 77 (5x15.4) Inch Open Slot Wire Covers
This under-desk open-slot cable raceway kit is designed to hide and route multiple power, Ethernet, and AV cables along desks and TV stands. Buyers report it installs fairly quickly, cuts to length easily, and stays secure, with the main caveat being that it is best for fixed routing, not for cables that need frequent movement.