Under Desk Cable Management Tray, GZOKMOG 15.75" No Drill Cable Management
Quick take
This under-desk cable management tray is a no-drill solution for keeping power strips, chargers, and cords out of sight. It uses a clamp-style installation with anti-scratch rubber pads and a reinforced metal mesh build that supports up to 20 lbs, but it may not fit thicker desktops.
Pros and cons
Pros
- Quick, no-drill setup with anti-scratch rubber pads for desk protection
- Reinforced metal mesh and bottom construction supports up to 20 lbs
- Two side openings help with easy cable insertion and removal
- Designed to reduce clutter and improve cable organization under standing desks
Cons
- Works only with compatible desktop thickness (0.2 to 2 inches), so some desk edges may be too thick
- Best for setups where your cables can reach the tray area, especially if your PC or power source is farther away
What buyers think
Buyer feedback is generally positive, with themes focused on assembly and day-to-day usefulness. Multiple comments highlight that it is easy to install, sets up quickly, and feels secure once mounted. Reviewers also mention that the tray helps keep cords neatly contained, which is especially helpful for desks without drawers or for reducing visible cable clutter. Some feedback is limited to fit concerns, mainly around desktop thickness and how close the tray is to the equipment you are powering or connecting.
What this under-desk cable tray is for
The main job of an under-desk cable management tray is simple: give your power strips and cables a designated home so they do not hang under your workspace or spill across the floor. This tray is sized to sit beneath the desktop edge, with two side openings that make it easier to route cables in and out without constantly lifting the whole tray area.
Design and build that matter for real use
Metal construction with a 20 lb support claim
Built from carbon steel with a reinforced metal mesh design, the tray is intended to handle everyday cable and power-strip weight. The stated load capacity is up to 20 lbs, which is a key spec to check if you are planning to mount a heavier power setup or multiple adapters in one spot.
Desk protection from anti-scratch rubber pads
To prevent direct metal-on-desk contact, it includes anti-scratch rubber pads. That detail matters if you are working with wood or other finishes you do not want to mark when installing or adjusting the tray.
Side openings for easier cable routing
The tray uses two side openings to simplify insertion and removal. This is particularly useful for standing desk users who frequently change sit/stand positions and want cables to move cleanly without constant rearranging.
Size, fit, and compatibility
Before buying, measure your desktop and confirm the tray dimensions: the tray is 15.75 inches long by 4.72 inches wide. It is intended to work with flat-edged table tops with a thickness between 0.2 and 2 inches. If your desk edge is thicker than that range, you may run into mounting limitations.
It is also worth planning your cable reach. Some buyers found it works best when their PC or power items sit close to where the tray will be mounted, since your cords still need to comfortably reach the opening area.
Installation experience
This tray is designed for easy setup without drilling. It installs in a matter of minutes using a clamp-style approach, so you can improve cable organization without committing to permanent mounting changes. If your desk has a compatible edge thickness, the process is straightforward and does not require specialized tools.
Pros and cons for specific buyers
Best for
- People with standing or gaming desk setups who want cords and power strips out of sight
- Desks with flat edges where the underside area is accessible and cables can route to the tray
- Workspaces that do not have drawers (where under-desk organization is otherwise limited)
Worth reconsidering if
- Your desktop thickness falls outside the 0.2 to 2 inch range
- Your power strip or PC is far from the tray mounting location, making cable reach tight
Verdict
The GZOKMOG 15.75-inch under-desk cable management tray is a strong option if you want a no-drill metal solution for cleaner cord organization under your desk. It looks and functions like an intentionally simple upgrade, with easy installation, desk-friendly pads, and side openings for everyday cable routing. The main purchase caveat is fit, especially desktop thickness, so measure first to avoid sizing surprises.
FAQs
How do you install this under-desk cable tray?
It installs without drilling using a clamp-style setup and includes anti-scratch rubber pads to help protect your desk surface.
What desk thickness does this tray work with?
It is intended for flat-edged table tops between 0.2 and 2 inches thick. Measure your desk edge before ordering.
What are the tray dimensions?
The tray measures 15.75 inches long and 4.72 inches wide.
Does this tray support power strips and chargers?
Yes, it is designed to hold cords and related accessories like power strips and chargers out of sight, with a stated load capacity up to 20 lbs.
Are side openings helpful for standing desks?
They are designed to make it easier to route cables in and out, which can be useful if you manage cables frequently with sit-stand movement.
Is it a good choice if my cables are not very close to the mounting area?
It may be less convenient if the tray mounting position is far from your PC or power source, since the cables still need enough slack to reach the tray openings comfortably.
Want to check the latest pricing and availability? Buy on Amazon
Specifications
| Product Title | Under Desk Cable Management Tray, GZOKMOG 15.75" No Drill Cable Management Under Desk, Heavy Duty Metal Cord Organizer, Home Office Wire Management for Standing/Gaming Desk, 1 Pack Black |
|---|---|
| Category | Electronics > Computers & Accessories > Computer Accessories & Peripherals > Racks & Cabinets |
| Brand | GZOKMOG |
| Manufacturer | GZOKMOG |
| Model Number | LYS-US-CTray01-1B-40 |
| Item Weight | 1.75 Pounds |
| Product Dimensions | 15.75"L x 4.72"W |
| Color | Black-1 pack |
| Material | Metal |
| Indoor Outdoor Usage | Indoor |
| Number of Pieces | 1 |
| Unit Count | 1.0 Count |
| Mfr Part Number | LYS-US-CTray01-1B-40 |
| Warranty Description | 2 Year |
| Enclosure Material | Metal |
| Item Dimensions L x W | 15.75"L x 4.72"W |
| Installation Type | Clamp |
| Style Name | Rectangle Hole |
| Style | Rectangle Hole |
Available variants
Color
- White-2 pack
- Black-2 pack
- Black-1 pack
- White-1 pack
Size
- 15.75"
Recommended next
NavePoint 22U Server Cabinet Wall Mount Rack Enclosure with Caster
The NavePoint 22U server cabinet is a steel, 22U rack enclosure built for 19-inch IT and A/V gear, with options for wall-mounting or floor use and mobility via caster wheels. Built-in fans and a lockable tempered glass door help with airflow and equipment security, but the included airflow can be loud, and you will want to plan for cable depth and grounding before assembly.
NavePoint 15U Server Cabinet Wall Mount Rack Enclosure with Caster
A sturdy 15U network cabinet built for 19-inch rack gear, with a locking tempered-glass door, removable side panels, and built-in fans. Best for home labs and small IT installs that need a neat, secure enclosure, but it is a bit depth- and airflow-sensitive (the included fans can be loud).
NavePoint 22U Server Rack Enclosure with Shelves, Caster Wheels, 2 Fans, Locking Glass Door, Removable Side Panels
The NavePoint 22U server rack enclosure is a steel, 19-inch rack cabinet designed for home or small business A/V and networking gear. It includes three shelves, removable locking side panels, caster wheels for easier repositioning, and two built-in fans for airflow, with a lockable tempered glass front door for secure, visible access. The main tradeoff is assembly complexity and a few hardware design annoyances reported by buyers, so it’s best for those who want a functional, budget-friendly rack and don’t mind careful setup.
VIVO Under Desk and Wall 8.3 to 13 inch Wide Office and Gaming PC Mount (MOUNT-PC01L)
The VIVO MOUNT-PC01L is a heavy-duty under-desk or wall mount designed for full-tower PCs, with adjustable width (8.3 to 13 inches), adjustable height (14.6 to 25.2 inches), and a 135-degree swivel for easier access to rear ports and cables. It looks like a strong option for tidy desk setups, but you need to confirm your desk overhang and case dimensions first, since fit matters and some users note minor wobble depending on the setup.