UGREEN Ethernet Switch, 10-Port PoE Switch, 8 PoE+@60W + 2 Gigabit Uplink
Quick take
This UGREEN 10-port PoE Ethernet switch adds 8 PoE+ (802.3at/af) ports for running compatible devices like IP cameras and access points, plus 2 Gigabit uplinks for connecting back to your router or network. It is designed for plug-and-play use, with one-touch modes (Standard, Port Isolation/VLAN, and Extend) and PoE auto-recovery in Extend Mode. The main buying caveat is the 60W total PoE power budget, so fully powering multiple high-draw devices may require careful planning.
Pros and cons
Pros
- 8 PoE+ ports (up to 30W each) plus 2 Gigabit uplink ports for a typical small camera or office build.
- Total PoE power budget is capped at 60W, with overload protection that prioritizes ports during power cuts.
- One-button switching between Standard, Port Isolation (VLAN), and Extend mode.
- PoE auto-recovery in Extend Mode for PoE devices that go offline or freeze.
- Metal case and an internal AC power supply (includes an AC power cord).
Cons
- 60W total PoE budget may limit how many higher-watt devices you can run at once.
- VLAN/Port Isolation behavior can be useful, but it is not the kind of feature most buyers will need for every setup.
- Extend mode is intended for longer runs (listed up to 820 ft), but real-world distance needs depend on cable quality and the specific device.
- Unmanaged operation means no advanced monitoring or configuration via software.
What buyers think
Buyer-review evidence points to easy setup and day-to-day reliability for PoE camera and network additions. Several buyers describe using the switch to power PoE cameras (including Reolink models) and an Omada access point, with straightforward plug-in use and stable operation after installation. Reviewers also mention solid build quality, including a sturdy metal chassis, and they appreciate having an integrated power setup (not needing an external bulky PoE power brick). A small number of comments focus on physical mounting constraints (bottom screw recesses), and some buyers note they did not need VLAN mode, implying that the core value is PoE power and simplicity rather than advanced networking features.
What this switch is for
This is a practical choice when you are expanding a small network with multiple PoE-powered endpoints. With 8 PoE+ capable RJ45 ports, it is aimed at powering common security and network gear such as IP cameras and PoE access points, while the 2 Gigabit uplink ports help you connect the switch back to a router, NVR, or other upstream device.
PoE power details that matter for real installs
The switch supports 8 PoE+ ports using 802.3at/af standards, with up to 30W per PoE port. However, total PoE output is limited to 60W. That means your “how many devices can I run” answer depends on each device’s power draw. If the combined demand exceeds 60W, the switch cuts ports in priority order (ports 8 through 1) to prevent overload. There is also independent shutoff behavior for short-circuited ports, which helps limit the impact of a faulty cable or endpoint.
Three modes in one button, plus PoE auto-recovery
One of the differentiators here is mode switching with a single button:
- Standard mode: The switch behaves like a typical unmanaged PoE hub for your PoE devices and general networking.
- Port Isolation (VLAN) mode: Ports 1–8 are isolated from each other to help reduce network “storm” risks. (This can be useful in certain camera deployments where you want tighter separation between endpoints.)
- Extend mode: Intended to support PoE at longer cable runs (listed up to 820 ft), aimed at security systems and long-distance deployment.
In Extend Mode, ports 1–6 can automatically detect and restart connected PoE devices if they go offline or freeze. That is a convenience feature if you are trying to reduce manual intervention for occasional camera or access point lockups.
Performance and connectivity expectations
Data transfer is listed at up to 1000 Mbps (Gigabit). The switch is meant to deliver low-latency connectivity for real-time workloads like IP camera monitoring and general small-network use cases. For most home, office, and small-site deployments, the bigger decision factor is whether your devices are PoE compatible and whether you can stay within the 60W total budget, rather than whether the switch can hit higher-than-Gigabit speeds.
Pros and cons for different buyer types
Best fit for
- Home or small business camera setups where you need multiple PoE feeds without external power adapters.
- Deployments mixing PoE cameras and a few network devices (using the uplinks to connect upstream).
- Buyers who value plug-and-play simplicity and prefer unmanaged hardware over complex software.
- Users who want automatic PoE restart behavior as part of Extend Mode for long-distance camera runs.
Who should consider other options
- Anyone planning to run many power-hungry PoE devices at once. The 60W total budget can be a constraint.
- Buyers who need advanced management (dashboard monitoring, granular configuration, or detailed statistics). This unit is unmanaged.
- Users who only need a couple of PoE ports and want to minimize cost and unused ports.
How it compares (feature-based, not brand-based)
If you are choosing among PoE switches in this class, focus on four criteria:
- PoE standards and wattage: This one targets 802.3at/af PoE+ with a total 60W budget and up to 30W per PoE port.
- Number of ports vs. your endpoint count: 8 PoE ports cover typical small camera expansions, while the 2 uplinks reduce the need for separate cabling.
- Distance requirements: Extend mode is designed for longer runs (up to 820 ft), but cable quality still matters.
- Mode needs: Port Isolation/VLAN can be helpful for security-focused segmentation, while Standard mode keeps things simple.
If your priority is higher throughput (2.5GbE or 10Gb uplinks) or more total PoE wattage for many high-draw devices, you would typically look at higher-tier PoE switches. If your priority is a compact, unmanaged switch with just enough PoE capacity for a small camera stack, this model aligns well.
Verdict
The UGREEN 10-port PoE switch is a strong fit for buyers who want a straightforward way to power multiple PoE cameras or access points, with Gigabit networking and practical extras like Port Isolation mode and PoE auto-recovery in Extend Mode. The most important thing to get right is your device power budget, since the total PoE output is capped at 60W. If you match your plan to that limit and you do not need managed features, it offers a clean “set it and forget it” approach for small deployments.
FAQ
Is this PoE switch plug and play?
Yes. It is an unmanaged switch designed for simple, plug-and-play use, with a one-button mode option for Standard, Port Isolation (VLAN), and Extend.
How many devices can it power with PoE?
It has 8 PoE+ ports, but the total power budget is 60W. How many devices you can run depends on each device’s wattage draw, especially if you are using higher-power PoE models.
What is PoE auto-recovery in Extend mode?
In Extend mode, ports 1–6 automatically detect when a connected PoE device goes offline or freezes and restart it, which can reduce the need for manual rebooting.
Does it support VLAN or port isolation?
Yes. There is a Port Isolation (VLAN) mode that isolates ports 1–8 to help prevent endpoints from communicating with each other across those isolated ports.
How long can PoE run in Extend mode?
Extend mode is listed to support PoE up to 820 ft, but real-world performance depends on the cable and installation conditions.
What ports does it have for connecting upstream?
It includes 2 Gigabit uplink ports, which are used to connect the switch to your router, NVR, or other upstream network equipment.
Where can I check the latest price?
You can check the latest price and availability here: Buy on Amazon.
Specifications
| Product Title | UGREEN Ethernet Switch, 10-Port PoE Switch, 8 PoE+@60W + 2 Gigabit Uplink, Plug & Play, Standard/Port Isolation(VLAN)/Extend Mode, PoE Auto Recovery, Metal Unmanaged Network Hub for Security Camera |
|---|---|
| Category | Electronics > Computers & Accessories > Networking Products > Switches |
| Brand | UGREEN |
| Manufacturer | Ugreen Group Limited |
| Model Number | 35372US |
| Color | Grey |
| Number of Ports | 10 |
| Compatible Devices | Camera, Desktop, Laptop, Router |
| Interface | RJ45 |
| Data Transfer Rate | 1000 Megabits Per Second |
| Switch Type | managed |
| Case Material Type | Metal |
| Built-In Media | AC Power Cord, Ethernet Switch, User Manual |
| Warranty Description | 24 Months Warranty Service by UGREEN |
| Mfr Part Number | 35372US |
| Unit Count | 10.0 Count |
| Included Components | AC Power Cord, Ethernet Switch, User Manual |
Available variants
Model
- 35372US
- 35371US
Recommended next
TP-Link TL-SG105S-M2 5-Port 2.5G Multi-Gigabit Unmanaged Switch
The TP-Link TL-SG105S-M2 is a 5-port unmanaged 2.5GbE (Multi-Gig) switch built for plug-and-play expansion, ideal when you want more 2.5G Ethernet connections for a small home office or media setup. It’s fanless and uses a metal case, but you’ll want to confirm it fits your mounting approach and that unmanaged behavior matches your networking needs.
NETGEAR 5-Port Gigabit Ethernet Unmanaged Essentials Switch (GS305)
The NETGEAR GS305 is a simple 5-port gigabit, unmanaged Ethernet switch built for quick wired upgrades in homes and small offices. It’s plug-and-play, designed for silent operation, and supports both desktop and wall mounting, with an energy-efficient mode. The main caveat is it’s unmanaged, so it’s not the choice if you need advanced controls or VLAN features.
TP-Link 16 Port Gigabit Switch (TL-SG116E)
The TP-Link TL-SG116E is a 16-port gigabit Ethernet switch built for home and small office networks that want more control than a basic unmanaged switch. It supports features like QoS, VLAN, IGMP snooping, and link aggregation, while keeping setup straightforward. The main caveat is that VLAN-related settings can be easy to misconfigure if you are not careful about how ports are assigned and saved.
TRENDnet 6-Port 10G Switch, 4 x 2.5G RJ-45 Base-T Ports, 2 x 10G RJ-45 Ports, 60Gbps Switching Capacity, Wall Mountable, 10 Gigabit Network Connections, Lifetime Protection, Black, TEG-S762
A compact, fanless 6-port multi-gig switch designed to add 2.5G and 10G links using existing Cat5e (for 2.5G) and dedicated 10G connections. Best for small NAS and server backbones, home labs, and buyers who want a simple setup, but it runs hot and may need smart positioning for best comfort.