TRENDnet 6-Port 10G Switch, 4 x 2.5G RJ-45 Base-T Ports, 2 x 10G RJ-45 Ports (TEG-S762)
Quick take
The TRENDnet TEG-S762 is a compact 6-port switch built for small network upgrades, pairing four 2.5G RJ-45 ports with two 10G RJ-45 ports. It is a good fit for NAS and server backbones where you want multi-gig connectivity without a full rack switch, but buyers should plan for heat management because it can run hot in typical desktop placement.
Pros and cons
Pros
- Port mix is practical for upgrades, 4 x 2.5G plus 2 x 10G RJ-45.
- Fanless, compact metal housing for a small footprint setup.
- Rated for up to 60Gbps switching capacity, built for higher-throughput internal networking.
- Supports wall mounting (helpful when heat and desk space are concerns).
Cons
- Can run hot during use, so placement and airflow matter.
- Only two 10G ports, so you may need to prioritize which devices get 10G links.
What buyers think
Buyer-review evidence is consistent on a few practical points. Many people report that it is easy to set up and that it improves responsiveness or throughput in home networks, especially for internal NAS and server usage. Several reviewers also emphasize that the switch runs hot, with some adjusting how they position it to improve airflow. Overall satisfaction appears tied to using the correct mix of 2.5G and 10G links for their devices, rather than expecting every port to deliver 10G.
What this switch is for
The TEG-S762 is designed for buyers who want faster local networking than standard 1G Ethernet, without moving to a larger, more expensive switch. The combination of four 2.5G Base-T ports and two 10G Base-T ports makes it especially useful when you have a small number of high-speed devices, like a NAS and one or two servers, plus other endpoints that benefit from 2.5G.
Key features that matter for real use
2.5G and 10G RJ-45, in one compact box
You get four 2.5GBASE-T RJ-45 ports and two 10G RJ-45 ports. This is a good configuration if your devices are stepping up in capability, for example, some NICs support 2.5G while a couple support 10G. It also helps you avoid overspending by not paying for a fully 10G port count when you do not need it.
Fanless, metal design for small setups
It is described as having a fanless design with a sturdy compact metal housing. In practice, that does not remove heat from the equation, and buyer reports suggest you should think about airflow (or consider mounting it) to keep performance stable and the environment comfortable.
Switching capacity and performance headroom
The switch is rated with a 60Gbps switching capacity. That higher internal headroom is what you want when multiple devices are talking at once, like a NAS serving data to clients, or when you are moving files and backups across the LAN.
Wall-mountable placement options
Wall mounting is a useful advantage for two reasons: it can save desk space and it can help you manage heat better than a fully enclosed or poorly ventilated tabletop placement.
Pros and cons (plain-English)
Where it shines
- Small multi-gig upgrades: A straightforward way to get 2.5G performance for multiple devices while reserving 10G ports for your fastest links.
- Home server and NAS backbones: Buyers commonly connect high-traffic storage and compute to the faster ports to reduce bottlenecks.
- Simple hardware experience: Setup and day-to-day use are repeatedly described as easy.
What to watch before buying
- Heat is a real consideration: Reviewers note that it can run hot, and some change placement orientation to address it.
- Two 10G ports may limit device count: If you want many 10G-connected endpoints, you might need additional switches or a different model with a higher 10G port count.
- 10G needs the right path: To get the best out of 10G links, you need compatible 10G networking equipment, such as a 10G NIC on the endpoints.
Who should buy it
- You have a NAS or server that you want to connect at 2.5G and, at least in key links, at 10G.
- You want a compact switch for a home lab, office, or small workgroup.
- Your current wiring is Cat5e (or better) and you plan to use 2.5G where appropriate.
- You value an easy, desk-friendly (or wall-mount) multi-gig solution rather than a larger managed rack switch.
Who should avoid it
- You need lots of 10G ports. With only two 10G RJ-45 ports, expandability at full 10G speeds is limited.
- Your setup cannot accommodate extra heat. If airflow is constrained, consider wall mounting or another form factor.
- You are not planning to use multi-gig-capable NICs or compatible connections. Otherwise, you will not realize the switch’s higher-speed potential.
Price and availability
Pricing varies by retailer and can swing significantly from the higher list price. If you are ready to upgrade, compare current street pricing and confirm you can cover the 10G endpoint side (NICs or compatible devices) so the 10G ports are actually usable.
Verdict
The TRENDnet TEG-S762 is a practical, compact multi-gig switch for small networks, especially when your goal is to accelerate NAS and server traffic using four 2.5G ports and two 10G ports. The biggest decision point is fit: if your devices are ready for 10G where you need it, and you are willing to manage heat and placement, it is an easy way to modernize a home backbone.
FAQ
What devices should I connect to the 10G ports?
Use the 10G ports for your highest-traffic or most bandwidth-sensitive links, like your NAS and one or more servers or workstations that have compatible 10G NICs. Keep 2.5G endpoints on the 2.5G ports.
Does this switch require a fan?
It is described as fanless, but that does not mean it stays cool in all environments. Buyers report that it can run hot, so plan placement with airflow in mind.
How many total ports does it have?
It has six RJ-45 ports total: four 2.5G ports and two 10G ports.
Will my existing Ethernet cables work?
For 2.5G connections, it is designed to work at up to 2.5Gbps over existing Cat5e or better cabling. For 10G, you still need appropriate cabling and compatible 10G endpoint hardware.
Is wall mounting supported?
Yes, it is designed to be wall mountable, which can also help with airflow compared to closed-in desk setups.
Specifications
| Product Title | TRENDnet 6-Port 10G Switch, 4 x 2.5G RJ-45 Base-T Ports, 2 x 10G RJ-45 Ports, 60Gbps Switching Capacity, Wall Mountable, 10 Gigabit Network Connections, Lifetime Protection, Black, TEG-S762 |
|---|---|
| Category | Electronics > Computers & Accessories > Networking Products > Switches |
| Brand | TRENDnet |
| Manufacturer | TRENDnet |
| Model Number | TEG-S762 |
| Color | Black |
| Number of Ports | 4 |
| Compatible Devices | Desktop |
| Voltage | 12 Volts (DC) |
| Lower Temperature Rating | 32 Degrees Fahrenheit |
| Upper Temperature Rating | 104 Degrees Fahrenheit |
| Interface | RJ45 |
| Data Transfer Rate | 60 Gigabits Per Second |
| Current Rating | 1 Kiloamps |
| Switch Type | Metal |
| Platform | Not Machine Specific |
| Case Material Type | Metal |
| Item Dimensions L x W x H | 7"L x 5.7"W x 1.3"H |
| Built-In Media | • TEG-S762 • Quick Installation Guide • Power Adapter (12V, 1A) |
| Warranty Description | Lifetime Warranty |
| Global Trade Identification Number | 00710931140729 |
| UPC | 710931140729 |
| Mfr Part Number | TEG-S762 |
| Unit Count | 1.0 Count |
| Included Components | • TEG-S762 • Quick Installation Guide • Power Adapter (12V, 1A) |
Available variants
Style
- 4 x 2.5G | 2 x 10G
Recommended next
TP-Link TL-SG105S-M2 5-Port 2.5G Multi-Gigabit Unmanaged Switch
The TP-Link TL-SG105S-M2 is a 5-port unmanaged 2.5GbE (Multi-Gig) switch built for plug-and-play expansion, ideal when you want more 2.5G Ethernet connections for a small home office or media setup. It’s fanless and uses a metal case, but you’ll want to confirm it fits your mounting approach and that unmanaged behavior matches your networking needs.
NETGEAR 5-Port Gigabit Ethernet Unmanaged Essentials Switch (GS305)
The NETGEAR GS305 is a simple 5-port gigabit, unmanaged Ethernet switch built for quick wired upgrades in homes and small offices. It’s plug-and-play, designed for silent operation, and supports both desktop and wall mounting, with an energy-efficient mode. The main caveat is it’s unmanaged, so it’s not the choice if you need advanced controls or VLAN features.
NETGEAR 5-Port Gigabit PoE Switch (GS305P) - Unmanaged Essentials Switch with 4 x PoE+ Ports @ 63W
The NETGEAR GS305P is a compact, fanless 5-port unmanaged Gigabit PoE+ switch built to power up to four PoE+ devices using one cable per device. With plug-and-play setup, a 63W total power budget (802.3at), and desktop or wall mounting, it is a strong fit for small home offices and camera or access point setups where you want simple reliability.
NICGIGA 10Gbe Ethernet Switch Unmanaged with 2 x 10Gb RJ45 Ports + 4 x 2.5Gb Base-T Ports
A simple, unmanaged 6-port switch that mixes 2 x 10Gb RJ45 and 4 x 2.5Gb RJ45 for upgrading a home lab, NAS, or Wi-Fi setup. It is designed for plug-and-play use, fanless operation, and quiet 24/7 running, with the main caveat that unmanaged switches offer no advanced controls.