UCTRONICS GPIO Breakout Kit for Raspberry Pi Pico- Assembled Pi (T-type breakout + breadboard)
Quick take
This UCTRONICS GPIO Breakout Kit is a practical add-on for Raspberry Pi projects where you want to access GPIO pins on a solderless breadboard. It bundles a T-type expansion board, an 830 tie-point breadboard, a 40-pin rainbow ribbon cable, and 65 jumper wires. The main buying caveat is that you should pay close attention to how the breakout board is oriented on the breadboard, since one report notes the side rails can end up reversed when installed the wrong direction.
Pros and cons
Pros
- Includes the key parts for a breadboard-based GPIO workflow: T-type expansion board, 830 tie-point breadboard, 40-pin ribbon cable, and jumper wires.
- Color-coded ribbon cable makes it easier to confirm pin wiring when extending GPIO outside a case.
- Breadboard and breakout are designed to make prototyping more convenient by bringing GPIO out where you can wire sensors and modules.
Cons
- Breadboard hole fit is not described as “super tight” by everyone, and inserting pins may require care.
- Orientation matters, because reversing the installation direction can swap positive and ground rails on the breadboard sides.
What buyers think
Buyer-review evidence is broadly positive on the kit’s usefulness for GPIO extension and breadboard prototyping. Multiple snippets praise the ribbon cable quality and the fact that correct pin connections are straightforward to verify, especially thanks to the color-coded wiring. Reviewers also describe the kit as straightforward to use for learning and self-directed projects. Where reviews get more specific is around fit and setup details, including how the breakout board’s pins interact with the breadboard, and the importance of double-checking rail orientation before powering a circuit. Overall, buyer feedback supports the idea that this kit is a convenient “get started quickly” solution, but it rewards careful setup.
What’s in the kit and what it’s for
This kit is designed to help you use Raspberry Pi GPIO pins in a breadboard-friendly way. Instead of wiring directly from a GPIO header to jump wires, you connect the Raspberry Pi to the breakout using the included 40-pin ribbon cable, then plug your components into the solderless breadboard.
Typical project use cases include wiring sensors and modules, building quick interface circuits, and learning GPIO basics with less frustration than free-form, header-to-breadboard wiring. It’s also built around a T-type expansion board approach, which is aimed at making GPIO breakout more convenient when you want to prototype on a breadboard surface.
Key features that affect day-to-day use
Ribbon cable extension and pin matching
The included 40-pin rainbow ribbon cable is highlighted as a quality, correctly terminated extension. In practice, the color coding helps you confirm you wired the header-to-breakout side correctly, which can reduce setup errors when you are moving GPIO into a different physical area (for example, outside a case).
Breadboard size (830 tie points)
The solderless breadboard provides 830 tie points, giving you more space for learning circuits or small to medium prototypes. In a kit like this, the breadboard size matters because it determines how comfortably you can dedicate rows and rails to different components without constantly re-routing.
Jumper wires included for quick starts
The kit also comes with 65 breadboard jumper wires, which supports immediate prototyping without waiting on additional accessories. This is especially useful for beginners who want to test wiring ideas quickly before ordering extra wire types.
Setup and orientation are part of the job
One review calls out an important setup caveat: if the expansion board is installed with the printing aligned in a certain direction, the breadboard side rails for positive and ground can end up reversed. The takeaway is simple: before powering anything, verify rail mapping and orientation on your specific setup.
Pros and cons (real-world fit)
- Best for: breadboard-based Raspberry Pi GPIO learning, prototyping sensors and small circuits, and builders who want a bundled cable and breakout instead of sourcing parts individually.
- Who should buy: Raspberry Pi makers who regularly move GPIO outside an enclosure and want easier pin verification via the color-coded ribbon cable.
- Who should avoid: shoppers who are not willing to do basic verification (checking rail orientation and wiring) before powering up, or who need a longer-than-average ribbon cable for a specific enclosure geometry.
Price and availability
This is positioned as an inexpensive bundle, with the intent of covering the most common “GPIO breakout + breadboard + jumpers” needs in one purchase. If you already own a breadboard, jumper wires, or a compatible ribbon cable, you may prefer a more targeted purchase to avoid paying for extras. If you need a complete starter workflow, bundling can be a practical value.
Is it worth it?
Yes, if your goal is to prototype GPIO projects on a solderless breadboard quickly, with a straightforward extension cable and jumper wire set. The kit’s biggest strengths are convenience and setup clarity (especially the color-coded ribbon cable). If you want to skip any rail-orientation checking, or you are working with a tight enclosure where cable length is critical, you may want to compare against kits that offer different cable lengths or a more foolproof physical alignment.
Alternatives to consider
If you are shopping around, compare based on these criteria rather than brand alone:
- Cable length: look for a ribbon cable long enough for your enclosure and wiring path.
- Breadboard compatibility: ensure the breakout’s mounting and pin layout is a good match for your breadboard style.
- Orientation aids: kits with clear markings, keyed connectors, or more rigid alignment can reduce beginner mistakes.
- Part bundling: if you already own a breadboard and jumpers, a smaller breakout-only option may be more cost-effective.
FAQ
What Raspberry Pi models is this GPIO breakout kit compatible with?
It is described as suitable for Raspberry Pi models including Raspberry Pi 5, 4, 3, 2, Model B, B+, A+, A, zero W, and Raspberry Pi zero.
Does the kit include the Raspberry Pi or an LCD display?
No. The kit includes the GPIO breakout/T-type expansion board, the 830 tie-point breadboard, the 40-pin ribbon cable, and jumper wires. Raspberry Pi boards and any display screen are not included.
Is the ribbon cable long enough to run GPIO outside a case?
The kit is meant for extending GPIO, and reviewers describe the included length as sufficient for routing outside a case without excessive slack.
Do I need to worry about wiring orientation on the breadboard?
Yes. One review notes that if the expansion board is installed in a way that matches a certain direction of the printing, the positive and ground rails on the breadboard sides can be reversed. Double-check rail mapping before powering a circuit.
What should I do if the breakout pins feel tight when inserting into the breadboard?
Careful insertion is recommended. A reviewer reports that pushing the extension board pins into the breadboard can move the metal contacts underneath, but those contacts were able to be repositioned without major difficulty. Proceed gently during setup.
Is this good for beginners?
It’s a strong option for learning because it bundles the essentials for breadboard prototyping (breakout board, breadboard, ribbon cable, and jumper wires). Just plan to verify the rail orientation and connections the first time you set it up.
Ready to compare and confirm the current deal? Buy on Amazon
Specifications
| Product Title | UCTRONICS GPIO Breakout Kit for Raspberry Pi Pico- Assembled Pi T- Type Breakout + 830 Tie Points Solderless Breadboard + 40 Pin Male - Female - Male Rainbow Ribbon Cable + 65pcs Jump Wires |
|---|---|
| Category | Electronics > Computers & Accessories > Computer Components > Desktop Barebones |
| Brand | UCTRONICS |
| Manufacturer | UCTRONICS |
| Color | Rainbow |
| Material | Copper |
| Strands | 40 |
| Number Of Wires | 65 |
| Material Type | Copper |
| Brand Name | UCTRONICS |
| Warranty Description | 6 months |
| Part Number | U6040 |
| Model | U6040 |
| Unit Count | 68.0 Count |
| Number of Cable Strands | 40 |
| No. of wires | 65 |
Available variants
Size
- U6033
- U6033 (Pack of 2)
- U6040
Recommended next
iRasptek Starter Kit for Raspberry Pi 5 RAM 8GB -128GB Edition of OS-Bookworm Pre-Loaded (Aluminum Case)
The iRasptek Pi 5 8GB starter kit bundles a Pi 5, a 27W USB-C PD power supply, an active PWM cooler, and a durable aluminum case, with Raspberry Pi OS (64-bit) and a 128GB preloaded card for a quicker “plug and go” setup. It is a strong choice for home labs, media playback, and projects that benefit from more RAM, with the main tradeoff being you are locked into this kit’s specific card, case, and cooling setup.
SunFounder PCA9685 16 Channel 12 bit PWM Servo Driver for Arduino and Raspberry Pi
The SunFounder PCA9685 16-channel 12-bit PWM servo driver adds 16 I2C-controlled PWM outputs, so you can run more servos or PWM-driven electronics without tying up your microcontroller. It’s designed to be “free running” once configured, with 5V logic compatibility, but you still need to plan power properly, especially for larger servo loads.
iRasptek Starter Kit for Raspberry Pi 5 16GB RAM - Pre-Loaded with 128GB Edition Pi OS (Aluminum Case)
The iRasptek Raspberry Pi 5 16GB starter kit is built for fast, low-friction setup, with an aluminum case, an active PWM fan, a 27W USB-C power supply, and a pre-installed Pi OS setup. It’s a strong pick for light desktop use, learning, media playback, and project tinkering, but buyers who want NVMe via a larger M.2 HAT+ style setup may find the included case limits.
ASRock Barebone System Components Other DESKMINI 310W, Black, Intel 8th
ASRock’s DeskMini 310W is a compact Intel 8th-gen barebones system built around low-power performance, flexible storage (2.5-inch drives plus an Ultra M.2 slot), and triple display outputs (DP, HDMI, VGA). It’s a strong fit for a quiet home office or small workstation, but it is not designed for power-gpu builds, and Intel 8th-gen CPUs can be a sourcing challenge.