TELESIN Upgraded Aluminum Alloy Cage Frame Housing for Go Pro 13 12 11 10 9
Quick take
The TELESIN aluminum alloy cage frame is built to protect a GoPro Hero 9 through 13 while adding practical accessory mounting points, including dual 1/4-20 threads and a cold shoe. It is designed for quick, tool-free installation and is compatible with the GoPro Quick-Release base for faster swapping. The main buying caveat is that the side plate and charging/port access setup can be a little fiddly, and the included retention screw may not suit every swivel mount.
Pros and cons
Pros
- Lightweight but sturdy aluminum alloy cage design, with rubber-padded protection for active use.
- Tool-free snap-on fit for GoPro Hero 9–13, with access that does not require removing the camera every time.
- Accessory-friendly mounting: 1/4-20 threads plus a cold shoe for mics, lights, and other gear.
- Supports fast mounting and removal with GoPro Quick-Release compatibility.
Cons
- Side plate and USB-C access configuration may require leaving the original side panel off, which can expose internal openings to the elements.
- The included retention screw for certain swivel mounts may be too short, meaning compatibility may depend on your existing hardware.
What buyers think
Buyer-review evidence is consistently positive on build and fit. Multiple reviewers describe the cage as solid and well made, with a snug fit that keeps the GoPro from shifting during outdoor activities. People also call out convenience features, especially easier charging access and a setup that supports faster gear changes. For accessory builders, the dual 1/4-20 threads and cold shoe are repeatedly mentioned as a straightforward way to add a microphone or video light.
Who this cage is for
- Action and outdoor shooters who want a lighter protective cage than bulkier alternatives, while still adding mounting options.
- Vloggers and interview creators who often attach a mic or small LED and want those accessories to sit consistently on the cage.
- GoPro Quick-Release users who value faster setup changes, especially between takes or during travel.
Who should skip it
- People relying on specific swivel mounts where the included retention screw length might matter. If your current rig uses a tight tolerance, you may want to verify screw compatibility before you assume it will drop in.
- Buyers who need fully sealed port access with every side configuration. The side plate and charging/USB-C access approach may require leaving certain parts open, which is a consideration if you shoot in conditions where exposure matters.
Key features that change how it feels to use it
Lightweight protection with a secure, padded approach
The cage uses magnesium-aluminum alloy and targets low weight (listed around 101g as the maximum recommended weight capacity for the system). Reviewers repeatedly describe the overall feel as sturdy and solid, and they note the camera stays firmly in place even during active use. The rubber-padded armor adds grip and impact absorption where you would expect it most.
Tool-free snap-on installation for gopro hero 9–13
Installation is built around a quick snap-on fit intended to avoid interrupting your workflow. Buyers mention the fit feels tight and secure, and the design aims to avoid blocking core buttons, screens, or ports during normal shooting.
Built for accessory setups: 1/4-20 threads and a cold shoe
This cage adds two 1/4-20 threads and cold shoe mounting so you can attach common accessories like microphones and video lights without improvising adapters. The mounting points are a big part of why reviewers recommend it for vlogging and quick setups.
Quick-release compatible for faster swaps
If you already use GoPro Quick-Release gear, this cage is intended to work with that ecosystem. That matters most for shooters who frequently remove the camera to charge, reposition, or change setups mid-session.
Side plate and charging access, with a real-world tradeoff
The cage includes an interchangeable side plate design, plus removable side coverage intended to give you different configuration options. One important practical caveat raised by a reviewer is that enabling certain USB-C access may require leaving the original side panel off and using the magnetic cover inside the frame, which can leave the compartment open to the elements (since it is described as non-waterproof or not resistant in that configuration). Another buyer raises concerns about how the EVA side plate latch/button behaves and whether it could be accidentally pushed off.
Pros and cons recap
- Buy it if you want a lightweight aluminum cage for GoPro Hero 9 through 13 that adds reliable mounting points for audio and lighting, and you prefer quick changes using GoPro Quick-Release.
- Consider alternatives or double-check compatibility if your shooting setup depends heavily on sealed port access in every configuration, or if your swivel mount requires a specific screw length.
Price and availability
The list price shown is $36.95. Availability is listed as in stock, but prices and stock can change quickly, so it is worth checking the latest listing before you finalize your purchase.
Verdict
The TELESIN aluminum alloy cage frame is a strong option for GoPro Hero 9–13 owners who want more than basic protection, namely accessory mounting (1/4-20 threads and a cold shoe) and quick-release compatibility. If you are careful about how you configure the side plate for charging and port access, it can streamline day-to-day shooting. Just make sure your mounting hardware works with the included retention screw and that you are comfortable with how exposed certain compartments may be in specific side configurations.
FAQ
Is this cage compatible with gopro hero 13, hero 12, hero 11, hero 10, and hero 9?
It is designed to fit GoPro Hero 9 through 13, using a tool-free snap-on installation for those models.
Does it support GoPro Quick-Release?
Yes. It is built to be compatible with the GoPro Quick-Release base so you can mount and remove the camera quickly.
What accessory mounts does the cage include?
It includes dual 1/4-20 threads and a cold shoe, which are commonly used for microphones, LED lights, and other small accessories.
Can I charge the GoPro without taking it out of the cage?
Reviewers describe charging access as more convenient, and the design includes a charging cover approach. However, side plate and USB-C access configurations can affect how exposed compartments are, so it is worth matching your setup to your shooting conditions.
Are there any setup caveats to be aware of?
If your rig relies on specific screw hardware, it may be wise to verify compatibility.
View latest price on Amazon
Specifications
| Product Title | TELESIN Upgraded Aluminum Alloy Cage Frame Housing for Go Pro 13 12 11 10 9 Black, Supports Go Pro 13 Quick-Release System, with 1/4" Thread & Cold Shoe for Video Light Microphone for Hero Accessories |
|---|---|
| Category | Electronics > Camera & Photo > Underwater Photography > Housings |
| Brand | TELESIN |
| Manufacturer | TELESIN |
| Model Name | TELESIN Upgraded Aluminum Protective Frame Housing for Hero 13 12 11 10 9 |
| Model Number | GPL-S6-FMS-15-TGP-US |
| Color | black |
| Item Weight | 0.2 Kilograms |
| Manufacturer Part Number | S6-FMS-15-TGP |
| Maximum Weight Recommendation | 101 Grams |
| Compatible Devices | Camera |
| Video Capture Format | MP4, AVI |
| Minimum Shutter Speed | 0.0001 |
| Shooting Modes | Video, Photo, Burst |
| Water Resistance Level | Water Resistant |
| File Format | MP4, AVI |
| Number of Packs | 1 |
| Compatible Camcorder Models | GoPro HERO |
Recommended next
FitStill 263FT/80M Underwater Waterproof Diving Housing for Go Pro Hero 13/12/11/10/9 Black
The FitStill 263FT/80M underwater housing is built for GoPro HERO9 Black through HERO13 Black, using an aluminum alloy shell, stainless-steel hardware, and a large flat glass lens. It’s designed for serious water sports (up to 80m/263ft) with reported leak resistance, clear footage, and easy button access, with a couple of practical limitations to consider for audio and how the housing affects controls.
FitStill Underwater Waterproof Diving Housing for Go Pro Hero 13/12/11/10/9 Black, 60M/196FT
FitStill’s underwater housing is built specifically for GoPro Hero 9 to 13 Black models, aiming to keep your camera protected while you shoot in the water. It’s rated for up to 60m/196ft and uses a large flat glass lens with strong light transmission for clearer underwater footage, but audio recording is not supported through the housing and you may need to plan your depth expectations around real-world fit and sealing.
TELESIN Waterproof Case for DJI Action 5 Pro Action 4/3
A compact waterproof housing for DJI Action 5 Pro and compatible Action models, built around a tempered-glass lens and a quick-release mounting base. Buyers like the clear image quality and anti-fog performance for typical water sessions, with mixed durability or leak outcomes reported after deeper use. Buy it if you want an easy-to-deploy, lightweight housing for snorkeling to scuba depths, and make sure you’re using the correct camera fit and sealing routine.
DIVEVOLK Underwater Touchscreen housing Seatouch 4 Max Diving Phone case
The DIVEVOLK SeaTouch 4 Max is an iPhone-specific underwater housing built around full touchscreen control, designed for scuba, snorkeling, and similar water activities down to 200 ft. It uses a sealed, no-battery design and an aluminum frame for protection, with some tradeoffs for screen-protector use and selfie quality through the membrane.