FitStill 263FT/80M Underwater Waterproof Diving Housing for Go Pro Hero 13/12/11/10/9 Black
Quick take
The FitStill 263FT/80M underwater housing is designed specifically for GoPro HERO13 Black down through HERO9 Black, using an aluminum alloy shell with stainless-steel hardware and a large flat glass lens for clear underwater footage. Buyers frequently mention dry camera results and sharp image quality on real water outings, though audio through the housing is a common tradeoff and deeper-depth confidence is limited by mixed real-world depth reporting.
Pros and cons
Pros
- Made for GoPro HERO9 Black through HERO13 Black (model-specific fit).
- Waterproof housing design rated up to 80m/263ft with an upgraded waterproof sealing ring and tight buckle.
- Large flat glass lens intended to maximize sharpness underwater.
- Stainless-steel hardware helps reduce rusting after sea use.
- Buyers report no leaks and clear footage in at least moderate dive conditions.
Cons
- Audio can be muffled once inside the housing, and some buyers say they cannot rely on recorded audio.
- Some reported issues are tied to setup and fastening, including opening in rough water when not properly secured.
What buyers think
Buyer-review evidence centers on three areas: leak resistance, image clarity, and day-to-day usability. Multiple shoppers report that their camera stayed completely dry during underwater use, and that footage looked clear. Several also describe the housing as sturdy and well-suited for active water sports, with button access that works for common shooting controls. On the downside, audio through the housing is a frequent point, with buyers noting muffling and limited usefulness. One review also highlights that proper installation matters, because a poorly secured case can open in rough water.
Important note: Overall review depth coverage is not uniform, so confidence for the full 80m/263ft claim is harder to gauge strictly from review snippets alone. For serious technical diving, treat the housing rating as a target spec and follow careful setup and testing habits.
Key features that matter for underwater shooting
Compatibility with gopro HERO9–HERO13 black
This housing is built for the HERO9 Black, HERO10 Black, HERO11 Black, HERO12 Black, and HERO13 Black models. If your GoPro is one of these, fitment is the first big win because button layout and internal spacing are crucial for reliable operation.
Waterproof design rated to 80m/263ft
The housing is designed around a sealing system, including an upgraded waterproof sealing ring and a tight buckle approach meant to prevent leaks. The waterproof rating is a major part of the appeal for diving, snorkeling, and other water sports where you need full-time camera protection.
Lens choice for clearer footage
A large flat glass lens is included to support sharp imagery above and below water. A high light transmission design is also listed, which is relevant for darker underwater scenes where every bit of light matters for exposure and video quality.
Materials intended for saltwater durability
The shell uses an aluminum alloy, while the hardware is stainless steel to help prevent rusting after sea use. If you frequently shoot in saltwater, that corrosion resistance can be a practical advantage over housings with less resilient metal components.
Pros and cons in real-world use
Where this housing tends to fit well
- Recreational divers and water-sports shooters who want a dedicated, model-specific housing and prioritize clear visuals.
- GoPro owners who mostly care about video and can accept that audio may not be full fidelity once sealed inside a dive shell.
- Saltwater users looking for stainless-steel hardware and an aluminum-alloy build that is less likely to corrode quickly.
Where buyers should be cautious
- Audio-focused creators: expect muffled or limited audio from inside the housing, so plan accordingly (for example, rely on captions or separate audio options when it matters).
- Anyone who may rush the seal: a review indicates that if the case is not properly closed and secured, it can open in rough water. Take time to ensure the seal is seated correctly before entry.
How it compares as a category choice
In the underwater housing category, the biggest decision factors usually come down to (1) correct model fit, (2) your target water conditions and depth, (3) lens clarity and light transmission, and (4) whether you can live with reduced audio. This FitStill option checks the first three boxes for GoPro HERO9–HERO13 owners, with the main category tradeoff being audio performance. If you need strong underwater audio, you may want to compare housings that explicitly prioritize sound capture, or consider alternative recording setups beyond the standard sealed case approach.
Verdict: is it worth it?
The FitStill 263FT/80M underwater housing looks like a strong pick for GoPro HERO9 Black through HERO13 Black owners who want a sturdy, saltwater-minded housing, a large flat glass lens for sharp underwater visuals, and a sealing system designed to prevent leaks. If your priority is reliable protection and clean video, it aligns well with the way buyers describe their results. If you rely on good underwater audio, plan for muffling or consider an alternate audio strategy before buying.
FAQ
Is the FitStill 263FT/80M housing compatible with GoPro HERO13 Black and older models?
Yes. It’s designed for GoPro HERO13 Black, HERO12 Black, HERO11 Black, HERO10 Black, and HERO9 Black (Black models).
How deep is the housing rated for?
The housing is rated waterproof up to 80m/263ft, and it uses an upgraded waterproof sealing ring and tight buckle design intended to prevent leaks.
Does the housing support audio recording underwater?
Audio recording is supported by the setup, but buyers report audio can be muffled once the camera is inside the sealed housing, and some say it is not reliable for clear audio.
Will this housing keep the camera dry?
Buyer feedback includes multiple reports of a dry camera during underwater use, but real-world performance depends on correct installation and proper sealing.
Is the housing suitable for saltwater?
The stainless-steel hardware is intended to help prevent rusting after sea use, which makes it a practical option for saltwater shooting.
What should I watch for before using it on a dive?
Make sure the housing is closed correctly and the seal is seated properly before water entry, especially if you’ll be in rough conditions.
Specifications
| Product Title | FitStill 263FT/80M Underwater Waterproof Diving Housing for Go Pro Hero 13/12/11/10/9 Black,Protective Underwater Diving Housing Shell Accessories (Hero13/12/11/10/9 Aluminum Alloy Shell) |
|---|---|
| Category | Electronics > Camera & Photo > Underwater Photography > Housings |
| Brand | FiTSTILL |
| Manufacturer | FitStill |
| Model Name | Hero13/12/11/10/9 Aluminum alloy shell |
| Model Number | Hero 13/12/11/10/9 Black (Aluminum) |
| Video Capture Resolution | 5K |
| Screen Size | 2 Inches |
| Color | clear |
| Material | Aluminum, Glass, Stainless Steel |
| Item Weight | 0.32 Kilograms |
| Water Resistance Level | Waterproof |
| Enclosure Material | Aluminum, Glass, Stainless Steel |
| Video Capture Format | MP4 |
| Compatible Devices | Go Pro Hero 13, 12, 11, 10, 9 Black |
| Audio Recording | Yes |
| Shooting Modes | GoPro's automatic shooting modes |
| Exposure Control Type | Automatic (Auto) |
| File Format | MP4 |
| Media Type | Image,Video |
| Viewfinder Type | LCD screen |
| Mounting Type | Quick Release Mount |
| Compatible Camcorder Models | GoPro HERO10 Black, GoPro HERO11 Black, GoPro HERO12 Black, GoPro HERO13 Black, GoPro HERO9 Black |
| Camera Model Compatibility | GoPro HERO10 Black, GoPro HERO11 Black, GoPro HERO12 Black, GoPro HERO9 Black |
| Manufacturer Part Number | GP 13 aluminum |
| Built-In Media | Hero13/12/11/10/9 Aluminum Alloy Shell |
| Warranty Description | 24 Months |
Available variants
Model
- Hero 13/12/11/10/9 Black (Aluminum)
- Hero 13/12/11/10/9 Black (Standard)
- Hero 12/11/10/9 Black (Not For Hero 13)
Recommended next
FitStill Underwater Waterproof Diving Housing for Go Pro Hero 13/12/11/10/9 Black, 60M/196FT
FitStill’s underwater housing is built specifically for GoPro Hero 9 to 13 Black models, aiming to keep your camera protected while you shoot in the water. It’s rated for up to 60m/196ft and uses a large flat glass lens with strong light transmission for clearer underwater footage, but audio recording is not supported through the housing and you may need to plan your depth expectations around real-world fit and sealing.
DIVEVOLK Underwater Touchscreen housing Seatouch 4 Max Diving Phone case
The DIVEVOLK SeaTouch 4 Max is an iPhone-specific underwater housing built around full touchscreen control, designed for scuba, snorkeling, and similar water activities down to 200 ft. It uses a sealed, no-battery design and an aluminum frame for protection, with some tradeoffs for screen-protector use and selfie quality through the membrane.
HONGDAK Waterproof Housing Case for GoPro Hero 4/3/3+, 60M/196FT Underwater Protective Dive Housing Shell
The HONGDAK waterproof housing case is a budget-focused option for GoPro Hero 4 and Hero 3/3+ cameras, aiming to keep water out to 60m (196ft). Buyers like the clear lens and tight seal for underwater shooting, but the opening/closing mechanism can be tricky, and hinge/clip durability varies by how carefully it is handled.
HONGDAK 60M/196FT Waterproof Housing Case for GoPro Hero 8 Black
The HONGDAK 60M/196FT waterproof housing case is designed for GoPro Hero 8 Black users who need a clear, deep-water shell with straightforward access to core controls. It’s built around a PMMA body and a high-transparency tempered glass lens for underwater photo and video, but the tightly sealed design can make opening harder, and some hinge/clip durability concerns show up in limited buyer feedback.