Tablet Floor Stand with 4.5LB Heavy Metal Base, Overhead Bed Phone review
Quick take
This floor stand is designed to hold compatible phones and tablets hands-free, with a 4.5 lb reinforced metal base and height/angle adjustments that let you position the screen for bed reading, video calls, or desk use. It looks built for stability, and many buyers describe it as solid once adjusted and tightened. The main caveat is that assembly and joint tightening take some effort, so factor in a bit of patience at setup, especially at the arm-to-base connection.
Pros and cons
Pros
- Stable setup for devices: reinforced 4.5 lb heavy metal base helps reduce tipping for typical daily use.
- Flexible positioning: height adjustable (27.5 to 59.05 inches) with 360-degree rotation for different viewing angles.
- Wide device compatibility: supports many phones and tablets in the 4.7 to 12.9 inch range (with a max device weight limit stated for compatibility).
- Built for versatility: works across bed, couch, kitchen, office, nightstand, and similar viewing spots.
Cons
- Assembly can be fiddly: buyers mention the arm-to-base screw/joint requires more effort than expected.
- Some tablets may need extra stability: compatibility guidance suggests adding weight when using heavier tablets or tablets in cases.
- Fine-tuning matters: if a joint is not tightened fully or positioned correctly, adjustability may feel less smooth.
What buyers think
Buyer-review evidence is consistently positive about stability and everyday usefulness. Multiple buyers describe the stand as solid and sturdy after setup, with adjustments that allow them to angle the screen above eye level (including for bed reading or video watching). Review themes also point to practical usability, including easy-to-reach thumb-screw adjustments and a footprint that works in tighter spaces. A smaller set of comments highlights that assembly can take more strength and attention at the arm-to-base connection, and a few buyers mention minor tightness preferences on certain screws, though they still felt safe using the stand.
How this stand is meant to be used
This is a floor-mounted, overhead-style tablet stand built for “set it and look” viewing. The goal is to keep your screen at a comfortable height so you can reduce wrist strain from holding a tablet in your lap, or avoid balancing it on surfaces. The stand’s height range is 27.5 to 59.05 inches, and the mount can rotate 360 degrees to change viewing angle.
Because the base is reinforced and the stand is designed to be stable, it’s a strong fit for fixed-location routines like bed reading, couch streaming, study sessions, or video calls where you want the device at a consistent angle.
Compatibility and fit: check this before you buy
Device compatibility is based on both size and weight. The stand targets phones and tablets that fall within the 4.7 to 12.9 inch size range, and it also lists a maximum device weight limit for compatibility. For heavier tablets or tablets with cases, the guidance recommends adding some extra weight to improve stability.
It’s also important to verify that your device model is included in the compatibility list (which includes many iPad models, Galaxy Tab models, Kindle devices, and some other supported categories). If you are on the upper end of size or weight, plan for extra stabilization or confirm the mount’s fit for your exact device.
Stability and adjustability: what stands out
The most differentiating feature here is the reinforced 4.5 lb heavy metal base, paired with an adjustable arm and a rotating mount. Buyers frequently describe it as tipping-resistant and “solid,” which matters for overhead or bed use because even small shifts can be distracting. The cantilever length is listed as 22 inches, which helps position the device away from the base so you can reach viewing angles without needing a separate desk riser.
For adjustability, the height range supports everything from closer desk viewing to taller setups. Rotation is 360 degrees, which helps you swap between portrait and landscape orientations or fine-tune the screen angle for reading.
Assembly and setup tips that affect daily usability
Setup appears to be the main friction point. Some buyers found the arm-to-base screw/joint challenging to tighten, requiring more muscle than expected. This is one of those “worth it if you do it right” situations.
- Take your time aligning joints first: ensuring the arm and base are positioned correctly can make tightening easier.
- Tighten knobs after you set your preferred angle: the stand is meant to stay put once the joint is locked.
- If a joint feels stiff: loosening slightly, repositioning, then retightening is a practical approach mentioned by buyers.
Who should buy it
- People who want a hands-free floor stand for tablet or phone viewing in bed, at a nightstand, or on a couch.
- Shoppers prioritizing stability over lightweight portability.
- Buyers with devices in the 4.7 to 12.9 inch range who want flexible height and rotation.
- Anyone comparing stands for daily routines like reading, video calls, streaming, studying, or gaming.
Who should skip it
- Shoppers who want ultra-fast assembly and no fiddly joint work at setup.
- People using a very heavy tablet or a bulky case without a plan for additional stability.
- Buyers who need a lightweight stand they can move frequently, since the reinforced base is intentionally heavier.
Verdict
The Tablet Floor Stand with a 4.5 lb heavy metal base is a solid choice for viewers who want a stable, adjustable overhead-style setup for compatible phones and tablets. If your priority is stability for bed or couch use, the heavy base and wide height/rotation range align well with that goal. Just be prepared for a slightly more involved assembly at the arm-to-base joint, and confirm your device meets the size and weight compatibility limits for the best results.
Ready to check the latest availability and price? Buy on Amazon
FAQs
What size tablets and phones does this stand support?
It’s designed for devices in the 4.7 to 12.9 inch range, and it also has a maximum device weight limit for compatibility. If you use a heavier tablet or a tablet with a case, stability may require adding extra weight as recommended.
How high can the stand adjust?
The height is adjustable from 27.5 inches to 59.05 inches, which supports everything from closer viewing to taller overhead setups.
Does the mount rotate?
Yes. The stand allows 360-degree rotation so you can change viewing angles and orientation (portrait vs. landscape).
Is assembly difficult?
Assembly requires some strength at the arm-to-base joint. A few buyers note the screw/joint connection can be challenging, but the stand is reported to perform stably once tightened and positioned correctly.
Will it work for bed use?
It’s specifically intended for overhead bed or nightstand-style viewing, with adjustable height and angle. The stability-focused base is meant to reduce wobble for typical home viewing.
Specifications
| Product Title | Tablet Floor Stand with 4.5LB Heavy Metal Base,Overhead Bed Phone Stand Angle Height Adjustable Holder, Universal Phone Mount for iPad iPhone Pro Air Mini, Samsung Tab, Kindle, E-Readers... |
|---|---|
| Category | Electronics > Computers & Accessories > Tablet Accessories > Stands |
| Brand | TabHolderix |
| Manufacturer | TabHolderix |
| Color | Black |
| Form Factor | Tower |
| Compatible Devices | iPad min 1/2/3/4/5/6, iPad Air 1/2/3/4/5, iPad 5/6/7/8/9, iPad Pro 9.7", iPad Pro 10.5", iPad Pro 11" 1st/2nd/3rd ; Galaxy Tab S 8.4/ S 10.5/ S2 8.0(2015)/ S2 9.7(2015)/ S2 8.0(2016)/ S2 9.7(2016)/ S3/ S4/ S5e/ S6/ S6 Lite/ S7/ s8; Galaxy Tab A 8.0 (2015)/ A 9.7 (2015)/ A 7.0（2016）/ A 8.0 (2017)/ A 8.0 (2018)/ A 10.1 (2019)/ A 8.0 (2019)/ A 8.0 （2019）kids/ A Kids（2019）/ A 8.4（2020）/ A7 10.4（2020）/ A8 10.5 (2021) ; Galaxy Tab 7.0/ Tab 7.0 Plus/ Tab 7.7/ Tab 8.9/ Tab 2 7.0/ Tab 3 7.0/ Tab 3 8.0/ Tab 3 Lite 7.0/ Tab 4 7.0/ Tab 4 8.0/ Tab 4 10.1/ Tab E 9.6 / Tab Pro 8.4/ Tab Pro 10.1; Kindle 2/4/5/7/8/10/2022, Kindle Keyboard, Kindle Touch, Kindle X Migu, Kindle Paperwhite 1/2/3/4/5, Kindle Voyage, Kindle Oasis 1/2/3; Kindle Fire 1st, Fire 5th, Fire 7 7th/9th, Fire HD 6 4th, Fire HD 7 2nd/3th/4th, Fire HD 8 5th/6th/7th/8th/10th, Fire HD 10 5th/7th/9th/11th, Fire HDX 7 3th, Fire HDX 8.9 3th/4th; Pixel C; Switch(Without joy cons)；***Note: For heavy tablets or tablets with a case, ensure to a |
| Compatible Phone Models | iPhone 6/ 6 Plus/ 6S/ 6S Plus, iPhone 7/ 7 Plus, iPhone 8/ 8 Plus, iPhone X/ XS/ XS Max/ XR, iPhone 11/ 11 Pro/ 11 Pro Max, iPhone SE 2nd, iPhone 12/ 12 mini/ 12 Pro/ 12 Pro Max, iPhone 13/ 13 mini/ 13 Pro/ 13 Pro Max, iPhone 14/ 14 Plus/ 14 Pro/ 14 Pro Max; Galaxy Alpha/ A5/ A7/ A8/ A3 (2016)/ A5 (2016)/ A7 (2016)/ A8 (2016)/ A9/ A9 Pro/ A3 (2017)/ A5 (2017)/ A7 (2017)/ A8 (2018)/ A8+ (2018)/ A8 Star/ A6s/ A6 (2018)/ A6+ (2018)/ A8 star/ A9 star/ A7 (2018)/ A9 (2018) / A8s/ A9 Pro（2019）/ A10e/ A10/ A10s/ A20e/ A20/ A20s/ A30/ A30s/ A40/ M30/ A50/ A50s/ A51/ A60/ A70/ A70s/ A71/ A80/ A90 5G/ A01/ A01 Core/ A02s/ A11/ A12/ A21/ A21s/ A31/ A32 4G/5G/ A41/ A42 5G/ A51/ A71/ A22 5G/ A32/ A32 5G/ A52/ A52 5G/ A52s 5G/ A72/ A03/ A33/ A53/ A73; Galaxy Note （2011）/ Note ll（2012）/ Note3（2013）/ Note3 Neo（2014）/ Note3 4G LTE / Note4（2014）/ Note Edge（2014）/ Note5（2015）/ Note FE/ Note8（2017）/ Note9（2018）/ Note10 (2019)/ Note10+ (2019)/ Note10 5G (2019)/ Note10+ 5G (2019)/ Note10 Lite (2020)/ Note 2 |
| Mounting Type | Floor Stand |
| Other Special Features of the Product | Foldable |
| Antenna Location | Desk |
| Adjustable Length | Yes |
| Fastening Type | Bracket |
| Unit Count | 1.0 Count |
| Number of Items | 1 |
| Mfr Part Number | 001 |
| Built-In Media | tablet holder |
| Warranty Description | 1 year |
| Enclosure Material | Carbon Steel |
Recommended next
OHLPRO Cup Holder Tablet Mount for Car, Anti-Shake iPad Stand with Drink Holder (5-17" clamp)
A cup-holder mount that turns your center console into a stable tablet and phone setup. With a twist-to-expand base, deep cupholder grips, and a telescopic, rotatable arm, it targets drivers who want less wobble on bumpy roads, plus a built-in drink holder for large mugs.
OHLPRO Tablet Holder for Car Dashboard & Windshield, Long Arm Suction Cup Tablet Mount Fits 5-17" iPad Pro/Air/Mini
The OHLPRO long-arm suction-cup tablet mount is built for in-vehicle tablet viewing, with a glue-free 80mm suction base, telescopic extension, and 360-degree rotation. It is a practical fit for larger tablets (and thick cases), but it is not ideal for every smaller model or device layout, especially where cradle arms can interfere with side buttons.
iPad Holder for Desk, Adjustable Tablet Arm iPad Desk Mount with C-Clamp, 30" Foldable Long Arm & 360° Rotation
A flexible clamp-on tablet arm mount designed for iPads (4.7”–15.6”) and even 15.6-inch portable monitors. Buyers like the long reach, 360° rotation, and sag-free stability under typical loads, with one common friction point: tightening and loosening joints requires the included Allen key.
Urmust Tablet Stand for Desk, Adjustable iPad Holder for Bed
The Urmust tablet stand is a desk-friendly aluminum arm mount with 360° rotation, adjustable height and angle, and cable clips. It’s built to hold position without sagging when the joints are tightened, and it supports many iPad, Galaxy Tab, and iPhone sizes, but it’s intended for flat tabletop use only.