OHLPRO Tablet Holder for Car Dashboard & Windshield, Long Arm Suction Cup Tablet Mount Fits 5-17" iPad Pro/Air/Mini
Quick take
This long-arm OHLPRO tablet mount uses a glue-free suction cup base and a telescopic arm to position a compatible 5 to 17-inch tablet at a comfortable viewing angle for GPS, delivery work, or passenger entertainment. The main tradeoff to consider is device fit, because some smaller tablets or specific button placements may not work as cleanly as larger iPad Pro/Air/Mini-style devices.
Pros and cons
Pros
- Glue-free 80mm suction base designed for windshield or dashboard mounting (no sticky adhesive).
- Long telescopic arm (about 5.5 to 7.5 inches) plus 360-degree rotation for portrait and landscape.
- Wide clamp range intended to fit larger tablets and devices with thicker cases.
- Clear buyer feedback emphasizing a secure hold during driving and day-to-day use.
Cons
- Compatibility may vary by device size and where side controls sit, based on reported cradle-arm interference.
- Suction mounts can depend on surface conditions, so prep and correct locking matter.
What buyers think
Buyer-review evidence is limited in volume per detail, but the feedback themes that do appear are fairly consistent: many users describe the mount as easy to use and able to keep a tablet in place over repeated miles. Several comments also connect the mount with practical use cases like using a tablet instead of a phone for navigation or accessibility needs.
What this tablet car mount is for
The OHLPRO long-arm suction mount is designed for drivers who want their tablet visible and reachable while traveling. It is positioned as a dashboard or windshield mount for larger tablets, including iPad Pro and similar form factors, with adjustment controls intended to help reduce glare and bring the screen to eye level. It can also function as a desk-style tablet stand for non-driving use.
Key features that affect everyday use
Glue-free suction, reusable base
Instead of adhesive, the mount uses a smooth silicone 80mm suction base that relies on vacuum pressure. It is described as washable and reusable, and it includes an adhesive dashboard pad intended for textured surfaces. In practical terms, this helps you move the mount between windshield and dashboard without dealing with sticky residue.
Long arm extension plus multi-angle adjustment
The telescopic arm extends roughly from 5.5 to 7.5 inches, giving you room to fine-tune screen distance and angle. There are three independent adjustment knobs for tilt and position, and the cradle includes a ball joint with 360-degree rotation so you can switch between portrait and landscape.
Clamp range for larger tablets and thick cases
The clamp is designed with an extra-wide stretch range (about 5.1 to 12.2 inches) and deeper corners (up to about 1.18 inches) to accommodate thick cases and devices with bulky protection. This is one reason the mount is aimed at tablets like iPad Pro 12.9 and other larger models.
Compatibility and fit: when it works best
From the design, this mount appears best suited for larger tablets and common iPad sizes where the cradle arms align well with the device frame. It can also be a strong option if your tablet has a thicker protective case and you still need firm support.
However, fit is not only about overall size. The cradle-arm layout can affect side-button access depending on orientation. If your device has prominent side controls (or if your case adds extra bulk in a way that shifts button placement), check that the arms will not press against or block those controls.
Pros and cons you should weigh before buying
Pros
- Stable on the road for many buyers: multiple reviews describe the mount holding position without tablets slipping during driving.
- Driver-friendly adjustments: extension and 360-degree rotation make it easier to set a usable viewing angle.
- No sticky residue approach: glue-free suction is designed to avoid mess compared with adhesive-based mounts.
Cons
- Not every tablet model fits the same: reported issues with a specific Galaxy Tab model suggest that button layout and cradle-arm placement can matter.
- Surface prep still matters: like all suction mounts, real-world performance depends on mounting surface cleanliness and how firmly the vacuum lock engages.
Best for, and who should avoid it
- Best for: drivers or travelers using a larger tablet for navigation and work, people who prefer suction mounting over permanent adhesive, and anyone who wants an adjustable long-arm screen position.
- Good fit if you have: an iPad Pro/Air/Mini-style tablet, or a tablet with a thicker case where deeper corners help support the device.
- Consider alternatives if you have: a smaller tablet model with side buttons or control placement that could interfere with cradle arms, or if you are unwilling to test and re-seat the mount on your specific dashboard/windshield surface.
Verdict
The OHLPRO long-arm suction tablet mount is a solid choice for many larger tablets, especially when you want a stable in-vehicle setup and flexible viewing angles. If you prioritize tablet security for daily driving and you fit within the intended size range, it is easy to see why buyers stay confident in its hold. Just make sure your exact tablet model and case do not create button-access conflicts, since fit can vary.
FAQ
Is this mount compatible with 5 to 17-inch tablets?
It is designed to work with devices in the stated size range and uses an extra-wide clamp plus deeper corners to support larger tablets and thick cases. If your specific model is on the smaller end, it is worth paying attention to how the cradle arms align with your tablet’s side controls.
Does it use adhesive?
The primary mounting method is a glue-free suction base intended to create vacuum pressure without sticky residue. It also includes an adhesive dashboard pad intended to help when mounting on textured surfaces.
Can you switch between portrait and landscape?
Yes. The mount includes a 360-degree rotating ball joint, which is meant for quick switching between portrait and landscape orientations.
Will it hold up on bumpy roads?
Many buyers describe the mount as staying in place over miles of driving. As with any suction cup mount, performance depends on mounting surface conditions and ensuring the suction lock is properly engaged.
Is it a good choice for thick tablet cases?
It is built with deeper corner support (up to about 1.18 inches) to help hold devices with thick cases, including protective cases from brands like OtterBox, based on the intended use.
How adjustable is the viewing angle?
The arm extends roughly 5.5 to 7.5 inches and uses multiple knobs for positioning. Combined with the cradle’s rotation, this should make it easier to reduce glare and set a comfortable screen angle.
Where can you mount it?
It is designed for dashboard and windshield mounting, with a reusable suction base intended to let you move between those locations.
Specifications
| Product Title | OHLPRO Tablet Holder for Car Dashboard & Windshield, Long Arm Suction Cup Tablet Mount Fits 5-17" iPad Pro/Air/Mini, Stable iPad Car Mount for Truck/SUV/Semi, Ideal Tech Gift for Drivers & Traveler |
|---|---|
| Category | Electronics > Computers & Accessories > Tablet Accessories > Stands |
| Brand | OHLPRO |
| Manufacturer | Shenzhen Hengyehui Technology Co., Ltd. |
| Model Name | PQ80-P2 |
| Model Number | PQ80-P2 |
| Item Weight | 399 Grams |
| Color | Black |
| Form Factor | Swivel |
| Compatible Devices | Smartphones, Tablets |
| Compatible Phone Models | Folding Phones: Samsung Galaxy Z Fold 5/4/3, Google Pixel Fold, and other large-screen foldable devices, Samsung: Galaxy S24/S23/S22 Ultra, S21 Plus, iPhone: iPhone 17/16/15/14/13/12 Pro Max, Plus, and all standard models |
| Mounting Type | Dashboard/Windshield/Desk |
| Other Special Features of the Product | 360 Degree Rotation, Adjustable, Hand Free, One-Hand Operation, Quick Release Button |
| Antenna Location | GPS navigation, truck driving, delivery work, passenger entertainment, rear seat movies, desktop tablet stand, family road trips, off-road adventures, car camping, Uber/Lyft driving, RV travel |
| Adjustable Length | Yes |
| Fastening Type | Suction Cup |
| Unit Count | 1.0 Count |
| Mfr Part Number | PQ80-P2 |
| Built-In Media | 1 x Adhesive Dashboard Pad, 1 x Complete Telescopic Suction Tablet Mount, 1 x User Manual, 1 x Warranty Card |
| Warranty Description | 3 Years |
| Enclosure Material | 20mm Reinforced Ball Joint, 80mm Washable Sticky Gel Suction Cup, High-quality Engineered Plastic, Soft Rubber Padding |
Available variants
Size
- for 5-17'' Device
- for 4.7-13'' Device
Recommended next
tounee Tablet Holder Stand, Dual Rod Adjustable Aluminum Desktop Stand, 4.7-16.9 inch (TS04)
The tounee dual-rod tablet stand is an all-metal, fold-flat desktop stand built for devices from 4.7 to 16.9 inches. It focuses on adjustability (height and angle), stability (weighted all-metal base, non-slip silicone pads), and day-to-day desk use for reading, calls, and multitasking.
Tablet Floor Stand with 4.5LB Heavy Metal Base, Overhead Bed Phone review
A height-adjustable floor stand for phones and tablets that aims to reduce hand fatigue and keep your screen stable in bed, on a couch, or at a desk. It uses a 4.5 lb reinforced metal base and a 360-degree rotation mount, but buyers should expect assembly effort around the arm-to-base joint and ensure the tablet fits the weight and size limits.
COOPER TabHolder, 7-10" Height Adjustable Tablet Stand, Premium iPad Stand for Desk, 270° Tilt iPad Holder for Desk, Tablet Holder, 15.6-17" Portable Monitor Support (Black)
The COOPER TabHolder is a desk-focused, height-adjustable tablet stand designed to bring your screen closer to eye level. With a weighted metal base, non-slip pads, and a 270° tilt range, it’s built for everything from iPad viewing and Zoom calls to supporting many 15.6–17" portable monitors, though you should avoid over-tilting if bumping or touchscreen interaction matters to you.
SteelStorm Tablet Floor Stand (360-Degree Rotatable, Adjustable Height and Angle)
A heavy, metal floor tablet stand designed for hands-free viewing with 360-degree rotation and adjustable height and angle. Best for shared-use spaces like bedrooms, kitchens, offices, and home gyms, as well as quick switches between portrait and landscape. The main caveat is that the device fit depends on screen size (4.7 to 12.9 inches) and device width/thickness limits, and some phones may be harder to lift out if you prefer a more “grabby” holder lip.